Page 1
Models RL/FT5000
XP
QUICK REFERENCE CARD
TDN 07102-00061
THIS AREA FOR SER VICE PROVIDER
CONTACT INFORMATION:
RL5000
XP
FT5000
XP
Page 2
2
MANAGEMENT FUNCTIONS
1. A T A TM WELCOME SCREEN, PRESS AND HOLD DOWN <CTRL> KEY (LOWER-RIGHT CORNER OF KEYP AD), PRESS <1> KEY,
THEN RELEASE BOTH KEYS. THE SECURITY LOGIN SCREEN WILL BE DISPLA YED.
2. ENTER THE 2-DIGIT USER ID. PRESS <ENTER> KEY . ENTER THE USER PASSWORD AND PRESS <ENTER> KEY . THE MAIN
MENU IS DISPLA YED.
TERMINAL SETTLEMENT FUNCTIONS
THE VIEW ATM SETTLEMENT TOT ALS FUNCTION DISPLA YS THE TOTAL NUMBER
OF CAPTURED CARDS AND DISPENSED CURRENCY WITH THE ST ART AND END
DA TES. THE START DA TE IS THE LAST A TM SETTLEMENT RESET DA Y AND THE END
DA TE IS THE CURRENT DA TE. THE SETTLEMENT TOT ALS ARE NOT CLEARED.
THE CLEAR ATM SETTLEMENT TOT ALS FUNCTION RESETS ALL THE ATM SETTLEMENT TOT ALS TO ZERO (0) AND RESETS THE START DATE TO THE CURRENT DA TE/
TIME.
REST AR T / SHUTDOWN TERMINAL
RESET AT M: FOLLOW ACCESS INSTRUCTIONS T O ENTER MANAGEMENT FUNCTIONS. SELECT SYSTEM P ARAMETERS, THEN RESTAR T TERMINAL.
SHUTDOWN ATM: FOLLOW ACCESS INSTRUCTIONS TO ENTER MANAGEMENT
FUNCTIONS. SELECT SYSTEM P ARAMETERS, THEN SHUTDOWN TERMINAL.
VIEW / CLEAR ATM SETTLEMENT TOT ALS
¾¾
¾¾
¾ GO TO MAIN MENU FUNCTIONS USING ACCESS INSTRUCTIONS. SELECT TERMINAL SETTLEMENT FUNCTIONS . CHOOSE
VIEW ATM SETTLEMENT TOTALS . SELECT PRINT OPTION TO PRINT A RECEIPT . CHOOSE CLEAR ATM SETTLEMENT
TOTALS TO RESET THE ST ART DA TE/TIME.
ACCESS INSTRUCTIONS
Page 3
3
ELECTRONIC JOURNAL
THE DISPLAY LAST X RECORDS FUNCTION IS USED T O DISPLAY AND PRINT
RECORDS FROM AN ELECTRONIC JOURNAL EITHER BEFORE OR AFTER THEY HA VE
BEEN AUDITED. RECORDS PRINTED OUT USING THIS COMMAND ARE NOT MARKED
IN ANY W A Y . THIS FUNCTION WILL NOT AFFECT THE OPERATION OF ANY OTHER
JOURNAL FUNCTIONS.
¾¾
¾¾
¾ GO TO MAIN MENU FUNCTIONS USING ACCESS INSTRUCTIONS. SELECT ELEC-
TRONIC JOURNAL. CHOOSE DISPLA Y LAST X RECORDS. PRESS NUMBER <1>
¾¾
¾¾
¾ PRESS NUMBER <2>, PERFORM QUERY , TO DISPLA Y THE
RECORDS. SELECT PRINT OPTION T O PRINT THE REPORT .
DISPLA Y LAST X RECORDS
TO HIGHLIGHT THE NUMBER OF RECORDS TO DISPLA Y .
ENTER AN AMOUNT ( #), THEN PRESS <ENTER>.
REPLENISH CASSETTE(S)
THE REPLENISH CASSETTE(S) FUNCTION ALLOWS USER TO UNLOCK/LOCK THE
CASSETTE(S) FOR CURRENCY REPLENISHMENT .
¾¾
¾¾
¾ GO TO MAIN MENU FUNCTIONS USING ACCESS INSTRUCTIONS. SELECT TER-
MINAL SETTLEMENT FUNCTIONS. CHOOSE REPLENISH CASSETTE(S).
¾¾
¾¾
¾ W AIT FOR ALL CASSETTES T O BE UNLOCKED. A SCREEN WILL BE DISPLA YED
THA T ALL CASSETTES HA VE BEEN UNLOCKED.
< FOLLOW THE CASSETTE REPLENISHMENT PROCEDURES >
¾¾
¾¾
¾ PRESS <1> TO RELOCK THE CASSETTES AND RETURN TO TERMINAL SETTLE-
MENT FUNCTIONS.
¾¾
¾¾
¾ A SCREEN W ARNING APPEARS THA T
THE TIMEOUT FUNCTION NORMALL Y
ASSOCIATED WITH MANAGEMENT
FUNCTIONS IS DISABLED. PRESS <1>
TO CONTINUE.
Page 4
4
UNLOCK/OPEN CABINET .
GRASP THE CASSETTE
HANDLE WITH ONE HAND
WHILE HOLDING THE
MECHANISM WITH THE
OTHER.
PULL THE CASSETTE OUT
SLIGHTLY, THEN PLACE
ONE HAND UNDERNEA TH
AS YOU SLIDE IT OUT.
PLACE CASSETTE ON A LEVEL SURFACE. INSER T THE
KEY INTO THE CASSETTE LOCK AND TURN CLOCKWISE. PRESS GREEN RELEASE BUTTON TO RAISE LID.
3
1
2
4
REPLENISHING CASSETTE(S)
MOVE THE PUSHER PLA TE TOWARDS THE CASSETTE
HANDLE PLA TE SHOULD ST A Y IN PLACE. LOAD CURRENCY USING 1" - 2" STACKS OF CURRENCY.
5
6
STEP
ACTION STEP
ACTION
EXTEND THE “PAWLS”
FULLY (INSERT) ON THE
PUSHER PLATE.
CLOSE THE CASSETTE
LID TO ITS LOCKED POSITION. THE GREEN RELEASE BUTTON SHOULD
“POP” OUT . TURN THE KEY
COUNTERCLOCKWISE
TO LOCK THE CASSETTE.
SLIDE CASSETTE INTO
ITS SLOT IN THE MECHANISM.
LEVEL NOTE PILE BY HAND. MOVE THE PUSHER PLA TE
AGAINST THE NOTES WITH ENOUGH PRESSURE TO
HOLD THE NOTES BEFORE CLOSING THE LID.
7
REMOVE REJECT VAULT FROM MECHANISM. PLACE
ON LEVEL SURFACE. INSERT THE KEY INTO THE
VAULT LOCK AND TURN CLOCKWISE. PRESS THE
GREEN RELEASE BUTTON TO RAISE LID.
8
REMOVE ANY REJECTED NOTES - BOTH SINGLE AND
BUNDLED NOTE AREAS. FOLLOW THE LOCKING
PROCEDURES FROM STEP 6 AND SLIDE REJECT
V AULT BACK INTO THE MECHANISM.
Single Note Reject Area
Bundled Note Reject Area
Page 5
5
REPLACING RECEIPT PRINTER PAPER (RLXP)
1
4
7
2
5
8
3
6
FEED END OF P APER OVER THE
BAR INTO FEED SLOT .
CUT REMAINING PAPER TO
ALLOW REMOV AL.
PRESS FEED BUTTON TO CLEAR
P APER FROM PAPER P A TH.
PAPER WILL FEED AUTOMA TI-
CALL Y INT O PRINTER.
LIFT SPINDLE TO REMOVE P APER
ROLL AND SPINDLE.
PLACE NEW P APER ROLL ON
BRACKET. MAKE SURE P APER
FEEDS FROM TOP!
REMOVE OLD PAPER ROLL. PLACE
SPINDLE IN NEW P APER ROLL.
9
(PRINTER SERVICE P ANEL)
PULL RELEASE PIN AND ROT A TE
FORWARD.
(PRINTER SERVICE P ANEL)
PRINTER ASSEMBL Y OPENED.
STEP ACTION
STEP
STEP
ACTION
ACTION
Paper feed
button
Page 6
6
REPLACING RECEIPT PRINTER PAPER (FTXP)
1
4
7
2
5
8
3
6
FEED END OF P APER INTO FEED
SLOT.
CUT REMAINING PAPER TO
ALLOW REMOV AL.
PRESS FEED BUTTON TO CLEAR
P APER FROM PAPER P A TH.
PAPER WILL FEED AUTOMA TI-
CALL Y INT O PRINTER.
LIFT SPINDLE TO REMOVE P APER
ROLL AND SPINDLE.
PLACE NEW P APER ROLL ON
BRACKET. MAKE SURE P APER
FEEDS FROM BOTTOM!
REMOVE OLD PAPER ROLL. PLACE
SPINDLE IN NEW P APER ROLL.
9
(PRINTER SERVICE P ANEL)
GRASP HANDLE AND PULL UP .
(PRINTER SERVICE P ANEL)
ROT ATE PRINTER ASSEMBL Y
DOWN.
STEP ACTION
STEP
STEP
ACTION
ACTION
Paper feed
button
Loading...