Triton 9100 Operation Manual

Model 9100

QUICK REFERENCE GUIDE

Model 9100

(shallow cabinet)

THIS AREA FOR SERVICE PROVIDER

CONTACT INFORMATION:

TDN 07100-00079

Model 9100

(deep cabinet)

04/2007

MANAGEMENT FUNCTIONS

- ACCESS INSTRUCTIONS -

1. AT ATM WELCOME SCREEN, PRESS AND HOLD DOWN <CTRL> KEY
(LOWER RIGHT CORNER OF KEYPAD), PRESS <1> KEY, THEN RELEASE

KEYS. THE TOP MENU WILL BE DISPLAYED.

BOTH

2. AT THE TOP MENU, SELECT MANAGEMENT FUNCTIONS OPTION.
ENTER PASSWORD TO ACCESS MANAGEMENT F UNCTIONS MAIN MENU.
THE MENU SCREEN (RIGHT) WILL BE DISPLAYED (ADMINISTRATION

PASSWORD ACCESS DISPLAYED).

RESETTING ERRORS

RESET ATM: OPEN THE ATM CONTROL PANEL AND LOCATE THE ON /
OFF SWITCH ON THE UNIT’S POWER SUPPLY TOWARDS THE REAR OF THE

ENCLOSURE

. PRESS THE POWER SWITCH <OFF>, THEN <ON>.

RESET ERROR: AFTER AN ATM RESET, THE <RESET ERROR> AND
<MANAGEMENT FUNCTION> OPTIONS APPEAR. SELECT THE RESET ER-
ROR OPTION. IF THE PROBLEM HAS BEEN CORRECTED, THE ATM SHOULD

RETURN

TO NORMAL OPERATION.

DIAGNOSTICS

ACCESS MANAGEMENT FUNCTIONS USING A CCESS INSTRUCTIONS. SELECT
DIAGNOSTICS FUNCTION.

PURGE: INSTRUCTS THE DISPENSER TO REMOVE ANY JAMMED NOTES IN

PATH. THE CODE DISPLAYED FOR A SUCCESSFUL PURGE IS ‘20 20 20’.

FEED

TEST DISPENSE: INSTRUCTS THE DISPENSER TO DISPENSE ONE (1)

NOTE FROM THE CASSETTE(S) INTO THE REJECT CASSETTE/TRAY/COMPART-
MENT.

THE CODE DISPLAYED FOR A SINGLE CASSETTE TDM SUCCESSFUL TEST DISPENSE IS ‘20 1 0 0 0’ AND FOR A MULTI-

CASSETTE TDM, ‘20 1 1 0 0’. THE CODE FOR AN SDD OR MINIMECH DISPENSER IS ‘20 20 21’.

TEST RECEIPT PRINTER: TESTS THE OPERATION OF THE RECEIPT PRINTER AND PRINTS A TERMINAL CONFIGURA-

TION SUMMARY.

2

CLOSE

ACCESS MANAGEMENT FUNCTIONS USING A CCESS INSTRUCTIONS. SELECT
CLOSE FUNCTIONS.

DAY CLOSE: USED TO COMPLETE DAILY BALANCING OF THE ATM WITH

HOST PROCESSOR. THE PRINTED INFORMATION INCLUDES A TOTAL OF ALL

THE

TRANSACTIONS

SWITCHED

SINCE THE LAST DAY CLOSE. TOTALS ARE CLEARED AND

TO THE NEXT BUSINESS DAY.

TRIAL CLOSE: THIS OPTION FUNCTIONS LIKE A DAY CLOSE EXCEPT THE TOTALS ARE NOT CLEARED.

JOURNAL

- PRINT LAST X -

ACCESS MANAGEMENT FUNCTIONS USING A CCESS INSTRUCTIONS. SELECT

JOURNAL OPTION. SELECT PRINT LAST X.

THE

FOR UNITS THAT HAVE AN SDD OR MINIMECH INSTALLED, YOU MAY PRINT UP

THE LAST 2045 ENTRIES. WHEN THIS OPTION IS SELECTED, ENTER A

TO

NUMBER

FOR UNITS THAT HAVE TDMS INSTALLED, YOU MAY PRINT UP TO THE LAST 1024 ENTRIES. ENTER A NUMBER BETWEEN
1 AND 1024.

BETWEEN 1 AND 2045.

EXAMPLE: ENTERING THE NUMBER 30 WILL PRINT OUT THE LAST 30 TRANSACTION/EVENTS THAT HAVE OCCURRED.

CASSETTE SERVICE

(Multi-Cassette only)

THIS FUNCTION SETS THE DESIRED CASSETTE(S) IN SERVICE OR OUT OF
SERVICE. THE CASSETTES MUST BE IN SERVICE TO ALLOW THE DIS-

PENSER TO ACCESS THE CURRENCY.

ERROR CODE 156: THIS ERROR APPEARS ON THE DISPLAY WHEN THE

CASSETTES

ARE DEPLETED OF CURRENCY OR HAVE BEEN PLACED “OUT OF

SERVICE”.

AFTER REPLACING/RELOADING THE CASSETTES (IF CURRENCY WAS DEPLETED), SELECT THIS FUNCTION TO PLACE THE

CASSETTE

(S) “IN SERVICE”, THEN EXIT OUT OF MANAGEMENT FUNCTIONS AND SELECT RESET ERROR OPTION.

3