Tripp Lite SMX750SLT User Manual

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +[phone]

E-mail: [e-mail]

Model #: SMX750SLT

SmartPro .75kVA Line Interactive Sine Wave UPS, SNMPWEBCARD option, Tower, USB, Serial, 220/230/240V

Highlights

750VA line interactive tower UPS; Sine wave output

220/230/240V nominal output during brownouts and overvoltages

USB, RS232 and optional SNMP/Web card are available for simultaneous use

Front panel status LEDs with load level and battery capacity display

C14 input; 6 C13 outlets; Includes 2 C13 to C14 cables

Description

Tripp Lite's SMX750SLT intelligent, line-interactive sine wave UPS system protects servers, networking accessories and telecommunications
equipment from blackouts, voltage fluctuations and transient surges. Large internal batteries offer 15 minutes half load runtime and 5 minutes full
load runtime. 750VA/500 watt power handling capability and full-time sine wave output offers guaranteed compatibility with networking, telecom and
other sensitive electronic applications. Includes 6 protected C13 output receptacles total. Network management interfaces support communications
via USB, RS-232 and optional SNMPWEBCARD network interface. HID-compliant USB interface enables integration with built-in power
management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load
levels, self-test data and utility power conditions. Includes PowerAlert monitoring software and complete cabling. Single line Tel/DSL and network
Ethernet line surge suppression. Built-in audible alarm and 9 LEDs offer status notification for line power, battery power, battery charge level, load
level, plus AVR boost and trim operational status information. Network grade AC surge suppression protects equipment from damage and
performance problems resulting from transient surges. Attractive, all-black tower housing.

Package Includes

SMX750SLT UPS System

PowerAlert Software CD-ROM

USB and serial cabling

User manual with warranty information

Features

SMX750SLT line-interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts

and overvoltages, plus network-grade AC surge suppression

750VA/500 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other

sensitive electronic devices

Large internal batteries offer runtimes of 15 minutes at half load (325VA/250 watts) and 5 minutes at full load (750VA/500 watts)

Automatic Voltage Regulation (AVR) circuits maintain user-selectable 220, 230 or 240V nominal output over an input voltage range of 158

to 277

Includes 6 C13 output receptacles

IEC320-C14 input connection accepts a variety of detachable cordsets

Built-in USB, RS-232 and optional SNMPWEBCARD accessory monitoring options

HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X

Included PowerAlert UPS monitoring software; Built-in Emergency Power Off (EPO) interface with cable

Supports Tripp Lite's WatchDog software application (requires optional WATCHDOGSW)

9 LEDs offer continuous status information of UPS operating parameters and site power quality

Hot-swappable batteries allow on-site battery replacement without powering off connected equipment

Single line Tel/DSL and network Ethernet line surge suppression

UL (USA), cUL (Canada), CE/IEC 62040, GOST, SASO

Specifications

OUTPUT

Output Volt Amp Capacity
(VA)

750

Output Watt Capacity
(watts)

500

Output power factor 0.7

Nominal Output
Voltage(s) Supported

220V; 230V; 240V

Nominal Voltage details 230V default (voltage selection via back panel switches)

Frequency compatibility 50 / 60 Hz

Output voltage regulation
(line mode)

-9%, +5%

Output voltage regulation
(Battery mode)

+/- 5%

Built-in UPS output
receptacles

6 C13 outlet(s)

Included output power
cables

Includes 2 C13 to C14 output power cables

Output AC waveform (AC
mode)

Sine wave

Output AC waveform
(battery mode)

Pure Sine wave

INPUT

Rated input current (at
maximum load)

3.6A (220V), 3.5A (230V), 3.4A (240V)

Nominal Input Voltage(s)
Supported

220V AC; 230V AC; 240V AC

UPS input connection type C14 inlet

UPS input connection
description

IEC320-C14 input connection accepts a variety of detachable cordsets to match country or site-specific wall
receptacles

BATTERY

Full load runtime
(minutes)

5 min. (500w)

Half load runtime
(minutes)

15 min. (250w)

DC system voltage (VDC) 24

Battery recharge rate
(included batteries)

Less than 4 hours to 90%

Replacement battery
cartridge (internal UPS
battery replacement)

RBC24-SLT

Battery Access Battery access door