Tripp Lite SMX5000XLRT3U User Manual

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +[phone]

E-mail: [e-mail]

Model Number: SMX5000XLRT3U

SmartPro 5kVA Line Interactive Sine Wave UPS, Extended-run & SNMPWEBCARD options, 3U Rack/Tower,
USB, Serial, EPO, 230V

Highlights

5kVA / 5000VA line interactive 3U rack/tower UPS; Sine wave output

230V nominal output during brownouts to 170V and overvoltages to 282V

USB, Serial, EPO & optional SNMP/Web card monitoring options

3U all-in-one chassis; 98% efficiency

Hardwire input; 8 C13 & 3 C19 outlets

Description

5000VA line interactive UPS system for server, network and telecommunications equipment. 5kVA UPS with internal batteries installs in only 3 rack
spaces with a depth of only 635mm / 25 inches. High 98% line-power efficiency rating reduces energy consumption and BTU heat output.
Expandable battery runtime with optional BP48V24-2U (limit 1), BP48V60RT-3U (multi-pack compatible) and BP48V27-2US (multi-pack compatible)
external battery packs. Uninterruptible Power Supply (UPS) switches to battery-derived AC output during power failures and extreme voltage
variations. Line interactive Automatic Voltage Regulation (AVR) offers voltage boost during brownouts and voltage reduction during overvoltage
conditions to maintain regulated 230v output over an input range of 170-282V. Supports hardwire input. Includes C19 and C13 output receptacles.
Network-grade AC surge and noise suppression. Network management interfaces support communications via USB, DB9 serial and
SNMPWEBCARD slot. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3
network interfaces at once. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. 3-stage metered
current monitoring and battery charge status LEDs. Utility power and voltage regulation LEDs. Audible alarm. Self-test. 4-post rackmount installation
accessories included; 2-9USTAND tower kit and 2POSTRMKITWM two post rack mounting accessories available. Field-replaceable, hot-swappable
internal batteries and external battery packs.

Package Includes

SMX5000XLRT3U UPS system

PowerAlert Software and Cabling

Mounting hardware for 4 post rackmount installation

Warranty information

Instruction manual

Features

5000VA/3750 watt max. output power capacity compatible with International 230V input voltage

3U rack/tower UPS installs in standard 19 inch rack enclosures with an installed depth of only 635mm / 25in

Protects sensitive networking equipment from blackouts, voltage fluctuations and transient surges

Line Interactive Automatic Voltage Regulation (AVR) corrects 230V nominal input from 170 to 282VAC to usable 230V levels without

consuming battery power

AVR circuits boost undervoltages from 170 to 199V by 12% and reduce overvoltages from 245 to 282V by 12%

Network interfaces support simultaneous communications via USB, DB9 serial or contact closure and SNMPWEBCARD slot

Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus

any number of additional servers over IP

Communications ports support on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge

current, battery capacity, internal UPS temperature, AC line frequency, timed inverter shutoff and activate self-test

Built-in Emergency Power Off (EPO) interface with cable

Sine wave output in AC and battery mode

Expandable runtime with optional BP48V24-2U (limit 1), BP48V60RT-3U (multi-pack compatible) and BP48V27-2US (multi-pack

compatible) external battery packs

Half/full load runtime of 27/10 minutes with internal batteries

Includes 11 output receptacles (3 C19/8 C13)

Hardwire input AC connection

3 stage metered LEDs offer current monitoring and battery charge level

Mains power and voltage regulation LEDs offer at-a-glance power status information

Front panel switches support self-test and alarm cancel functions

Included adjustable mounting rails support installation in 4 post 19 inch racks

Supports 2 post rackmount installation with optional 2POSTRMKIT accessory

Supports upright tower placement with optional 2-9USTAND accessory

CE, GOST, SASO listed

Specifications

OUTPUT

Output Volt Amp Capacity
(VA)

5000

Output kVA capacity (kVA) 5

Output Watt Capacity
(watts)

3750

Output kW capacity 3.75

Output power factor 0.75

Nominal Output Voltage(s)
Supported

220V; 230V; 240V

Nominal Voltage details 230v nominal inverter output voltage

Frequency compatibility 50 / 60 Hz

Output voltage regulation
(line mode)

-17%, +8%

Output voltage regulation
(Battery mode)

+/- 5%

Built-in UPS output
receptacles

8 C13 outlet(s); 3 C19 outlet(s)

Included output power
cables

Includes 3 C13 to C14 output power cables

Output circuit breaker 15A (x3) breaker supports 1 C19 outlet each, 10A (x2) breaker supports 4 C13 outlets each

Output AC waveform (AC
mode)

Sine wave

Output AC waveform
(battery mode)

Pure Sine wave

INPUT

Rated input current (at
maximum load)

27A

Nominal Input Voltage(s)
Supported

230V AC

UPS input connection type Hardwire

Phase Single-Phase