Tripp Lite SMX3000XLRT2U User Manual

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +[phone]

E-mail: [e-mail]

Model #: SMX3000XLRT2U

SmartPro 3kVA Line Interactive Sine Wave UPS, Extended-run & SNMPWEBCARD options, 2U Rack/Tower,
USB, Serial, EPO, 230V

Highlights

3kVA / 3000VA line interactive 2U rack/tower UPS; Sine wave output

230V nominal output during brownouts to 151V and overvoltages to 282V

USB, RS232, EPO & optional SNMP/Web card are available for simultaneous

use

Detailed status LEDs; 3 switched output load banks

C20 inlet; 8 C13 & 1 C19 outlets; Includes 3 C13 to C14 cables

Description

Tripp Lite's SMX3000XLRT2U intelligent, line interactive rack/tower uninterruptible power supply prevents data loss, downtime and equipment
damage due to power outages, voltage fluctuations and transient surges. Requires only two rack spaces (2U) in a standard rack enclosure. Large
internal batteries offer 11 minutes half load runtime and 4 minutes at full load. Runtime is expandable with optional BP48V24-2U or BP48V60RT-3U
external battery packs. Maintains regulated 230V nominal output without using battery power during brownouts and overvoltages from 158 to 278V.
3000VA/2250 watt power handling capability and full time sine wave output offers guaranteed compatibility with networking, telecom and other
sensitive electronic applications. Includes a total of 9 outlets with 3 load banks that are individually switchable via software interface to reboot select
equipment on demand or shed less significant loads to extend battery runtime for more critical equipment. Supports simultaneous remote monitoring
of UPS and site power conditions via built-in USB and DB9 monitoring ports. Includes PowerAlert UPS monitoring and unattended shutdown
software with complete cabling. Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter. Emergency Power Off (EPO)
interface offers option for instantaneous power-off of UPS and connected equipment in the case of fire or emergency. Multi-function audible alarms
and set of 5 front panel LEDs offer at-a-glance notification of UPS and line power status. Network-grade AC surge suppression protects equipment
from damage and performance problems resulting from transient surges and line noise. Attractive all-black color scheme.

Package Includes

SMX3000XLRT2U UPS System

PowerAlert software with USB and DB9 cables

Mounting hardware for 4 post rackmount applications

Cable for Emergency Power Off interface

Instruction manual with warranty information

Features

SMX3000XLRT2U line interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during

brownouts and overvoltages, plus network-grade AC surge suppression

3000VA/2250 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and

other sensitive electronic devices

Supports 2U rackmount installation in 4 post equipment racks, 2 post rackmount installation requires 2POSTRMKITWM, upright tower

installation requires 2-9USTAND accessory

Large internal batteries support a half load of 1500VA for 11 minutes and a full load of 3000VA for 4 minutes

Runtime is further expandable with the addition of external battery packs (BP48V21-2U - limit 1; or BP48V60RT-3U - multi-pack compatible)

Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)

Maintains regulated 230V nominal output during brownouts and overvoltages from 158 to 278V

Includes 9 UPS supported outlets arranged in 3 individually controllable load banks (2 outlets per bank) that can be powered off and back

on again via software interface

IEC320-C20 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles

PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, email notification,

event logging and running user-defined script commands.

Offers simultaneous monitoring through included USB and DB9 interface ports, or the monitoring by any number of additional servers over

IP with included PowerAlert monitoring software.

Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage,

DC battery voltage and remaining battery capacity

Emergency Power Off (EPO) interface with cable

Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for delayed or immediate reboot

of connected devices

Supports Tripp Lite's WatchDog software application to restore operation to locked equipment through soft reboot of application, OS or hard

power off/on reboot of connected equipment - ideal for unattended kiosk applications (requires optional WATCHDOGSW)

Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter

Emergency Power Off (EPO) interface with cable

Multi-function audible alarms and set of 5 front panel LEDs

Network-grade AC surge suppression

Attractive all-black color scheme

UPS battery set ships fully assembled, no time consuming connection of internal batteries by user is necessary

Specifications

OUTPUT

Output Volt Amp Capacity
(VA)

3000

Output kVA capacity (kVA) 3

Output Watt Capacity
(watts)

2250

Output kW capacity 2.2

Output power factor 0.8

Nominal Output Voltage(s)
Supported

230V

Nominal Voltage details 230v nominal inverter output voltage

Frequency compatibility 50 / 60 Hz

Output voltage regulation
(line mode)

230V (-15%, +6% )

Output voltage regulation
(Battery mode)

+/- 5%

Built-in UPS output
receptacles

8 C13 outlet(s); 1 C19 outlet(s)

Included output power
cables

Includes 3 C13 to C14 output power cables

Built-in controllable
switched load banks

Three switchable two-outlet C13 load banks

Output circuit breaker 10A (x2) - each breaker protects 4 C13 outlets, C19 outlet does not include a breaker

Output AC waveform (AC
mode)

Sine wave

Output AC waveform
(battery mode)

Pure Sine wave

INPUT