Tripp Lite SMX1200XLHG User Manual

Download

Page 1

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +(773) 869 1234

E-mail: saleshelp@tripplite.com

Model #: SMX1200XLHG

SmartPro UPS System - Intelligent line interactive medical-grade battery backup and network power management

Highlights

1000VA / 1kVA line interactive, extended run tower UPS

Maintains 230V nominal output over an input range of 155 to 274V

Professional features include serial port, IEC320 plug & outlets, built-in

isolation transformer

Input: IEC C14 inlet (230V 5A) / Output: 6 IEC C13 (230V)

2 year product warranty

Description

Tripp Lite's SMX1200XLHG offers medical-grade UPS protection with built-in line-interactive voltage regulation, expandable battery runtime and

intelligent monitoring with unattended shutdown capability. Tested to CE/IEC 60601-1 standard as medical electrical equipment. Built-in isolation

transformer with Faraday shield offers full line isolation and removes common mode noise while maintaining full AC surge suppression in all modes.

Includes high quality hospital-grade plug and outlets. Resistant to electrostatic discharge. 1000VA power handling capacity supports computers,

inter-networking equipment and other critical loads during commercial power failures. External battery connector allows configuration for up to

several hours of runtime during power failures by adding one or more external battery packs (BP36V15-2U limit 1 or BP36V42-3U multi-pack

compatible). Line interactive voltage regulation corrects brownouts as low as 155V and overvoltages as high as 274V back to normal 230V levels,

saving battery reserves for use only during complete power failures. Includes diagnostic LEDs and 2 built-in communications ports (1 USB, 1 DB9)

that work with included PowerAlert Software and cabling to provide automatic unattended shutdown of connected network and PC applications.

Applications

CE/IEC 60601-1 compliant UPS provides ultimate safety and reliability for patient point of care solutions, telemedicine, nurse's stations, wireless

communications systems, electronic prescribing applications, medical imaging and mission critical equipment. Not recommended for life support

applications

Package Includes

SMX1200XLHG Medical Grade Tower UPS System

PowerAlert Software and cabling

Warranty information

Instruction manual

Features

Ideal UPS protection for applications in medical patient-care areas where CE/IEC 60601-1 listed medical electrical equipment is required

Built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge

suppression in all modes

Provides connected equipment with continuous power during short and long duration loss of commercial power

Expandable runtime is available with the addition of one or more external battery packs (BP36V15-2U limit 1 or BP36V42-3U multi-pack

Page 2

compatible)

Line-interactive voltage regulation corrects brownouts and overvoltages from 155 to 274 volts back to usable 230V output levels, without

using battery power

Full line isolation prevents shock potential and operational problems in sensitive electronic equipment

Resistant to electrostatic discharge

Supports loads up to 1000VA/750W

27.5 min. half-load runtime (500VA/375W), 11 min. full load runtime (1000VA/750W)

6 protected outlets; 6-inch dongle with IEC C14 inlet

USB and DB9 communication ports

PowerAlert unattended shutdown software and complete cabling included

Complete surge protection, line isolation and EMI/RFI noise filtering

5 diagnostic LEDs indicate AC present, on battery, voltage correction, overload & battery low/replace

Battery replacement door and back panel grounding lug

2-year product warranty

Specifications

SYSTEM OVERVIEW

Voltage compatibility 230V AC

Frequency compatibility

50/60 Hz (auto-sensing)

OUTPUT

Output VA 1000

Output watts 750

Output nominal voltage

230V AC

Output voltage regulation

LINE MODE: Sine wave line voltage 230V (-18% / +8%)

Output frequency regulation

LINE MODE: Passes line frequency of 50/60Hz +/-10%

Outlet quantity / type 6 IEC320 C13

INPUT

Maximum input amps 5A / 1150 watts

Input connection type IEC320 C14 inlet

Input cord length 6 inch dongle, 16 gauge

Recommended Electrical Service

10A 230V

BATTERY

Full load runtime 11 min. (1000VA)

Half load runtime 27.5 min. (500VA)

Expandable battery runtime

Supports extended runtime with optional BP36V15-2U (limit 1) and BP36V42-3U external battery pack (multi-pack compatible)

DC system voltage 36V DC

Typical battery lifespan

3-6 years, depending on usage

Battery recharge rate 2-4 hours to 90%

VOLTAGE REGULATION

Voltage regulation description

Line interactive UPS offers 2 boost levels of brownout correction and a single level of overvoltage adjustment to maintain usable, computer grade output without consuming battery power over an input voltage range of 155 to 274V AC.

Page 3

Overvoltage correction

Input voltages between 245 and 274V AC are reduced by 9%

Direct pass through Input voltages between 200 and 244V AC are passed through unchanged

Brownout correction Input voltages between 183 and 199V AC are boosted by 10%

Severe brownout correction

Input voltages between 156 and 182V AC are boosted by 21%

LEDS ALARMS & SWITCHES

Front panel LEDs Yes, includes 5 front-panel indicator LEDs to show battery charge level, AC line voltage levels, automatic voltage

regulation status, UPS load level and replace battery warning

Alarms 3 function audible alarm indicates power failure conditions (4 short beeps every 10 seconds), overload (continuous

short beeps) and low battery (continuous tone)

Switches Yes, includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions

SURGE / NOISE SUPPRESSION

AC surge suppression 340 joules

AC suppression response time

Instantaneous

EMI / RFI AC noise suppression

Yes

PHYSICAL

Shipping weight (lbs) 48.8

Shipping weight (kg) 22

Shipping Dimensions (HWD/in)

18.5 x 12.2 x13.4

Shipping Dimensions (HWD/cm)

46.9 x 31 x 34

Unit weight (lbs) 45.5

Unit weight (kg) 20.5

Unit Dimensions (HWD/in)

12.7 x 7.5 x 9.1

Unit Dimensions (HWD/cm)

31.75 x 19.1 x 23.1

Material of construction

PVC

Form factors supported

Tower

Cooling method UPS cooling via rear-exit fan

Battery Access Battery access door allows hot swap battery replacement without powering connected equipment off

ENVIRONMENTAL

Relative Humidity 0 to 95%, non-condensing

COMMUNICATIONS

Network monitoring port

Includes 2 built-in monitoring ports, 1 USB & 1 DB9

Software and cabling included

PowerAlert UPS monitoring software is included on CD-ROM for all common network and standalone operating systems. Ships with 2 cables, 1-USB to USB & 1-DB9 to DB9

LINE / BATTERY TRANSFER

Transfer time from line power to battery mode

2-4 milliseconds

Low voltage transfer to battery power

155V (resets to line power as voltage increases to 163V)

Page 4

High voltage transfer to battery power

274V (resets to line power as voltage decreases to 266V)

SPECIAL FEATURES

Cold Start Yes, inverter can be cold started to enable temporary AC output during a power failure

Appearance Attractive gray tower UPS

BATTERY PACK ACCESSORY (optional)

Battery Pack Accessory (optional)

BP36V15-2U (limit 1) and BP36V42-3U external battery pack (multi-pack compatible)

CERTIFICATIONS

Certifications Tested to CE, IEC 60601-1 (Medical), Class B (Emissions)

WARRANTY

Product Warranty Period

2 year product warranty

Optional Coverage