Tripp-Lite SMARTINT1500 Specifications

SmartPro® 230V 1.5kVA 940W Line-Interactive UPS,
Highlights
Corrects under- and overvoltages
from 165V to 277V
6 IEC-320-C13 outlets
Front-panel LEDs indicate load,
power and battery statuses
Monitoring of power conditions
via PowerAlert®
20 min. runtime at half load; 7
min. at full load
Package Includes
SMARTINT1500 SmartPro 230V
1.5kVA 940W Line-Interactive
UPS
(2) IEC-320 C13-to-C14 power
cables
(2) DB9 cables
PowerAlert software
Owner’s manual
Tower, DB9, 6 Outlets
MODEL NUMBER: SMARTINT1500
Description
The SMARTINT1500 SmartPro 230V 1.5kVA 940W Line-Interactive UPS provides battery backup and AC power
protection against blackouts, brownouts, power surges and line noise that can damage electronics or destroy
data. Ideal for backing up VoIP systems, point-of-sale applications and network closets, the SMARTINT1500 switches to battery mode in milliseconds to keep
Featuring six IEC-320-C13 outlets and two C13-to-C14 power cords, the SMARTINT1500 has an internal battery that provides 20 minutes of support at half
load and seven minutes at full load. Front-panel LEDs indicate line power, battery power, load level, voltage regulation and battery status. An alarm sounds to
indicate power failure or a low battery.
Automatic voltage regulation (AVR) maintains 230V nominal output over an input range of 165V to 277V without using battery power. EMI/RFI noise filtering
improves your equipment’s performance and prevents damage. A 480-joule surge suppression rating protects your equipment from harmful power surges.
With Tripp Lite’s included PowerAlert software, the SMARTINT1500 enables safe unattended system shutdown and file saves in case of a prolonged power
failure.
Features
Protects Mission-Critical Equipment
Provides fully regulated AC output for VoIP systems, point-of-sale applications and network closets
Audible alarm signals loss of utility power or low battery
6 IEC-320-C13 outlets
C14 inlet
480-joule surge suppression rating
Reliable Battery Backup
Supports half load up to 20 min. and full load up to 7 min.
Internal batteries designed for hot-swap field replacement
94% line-power efficiency rating saves money in energy costs
Cold-start capability enables turn-on in battery mode during blackouts
Automatic Voltage Regulation(AVR)
Maintains 230V nominal output over input range of 165V–277V without using battery power
EMI/RFI Line Noise Filtering
Removes electromagnetic and radio frequency interference that can disrupt or damage equipment’s performance
LED Indicators
Front-panel LEDs signal indicate line power, battery power, load level, voltage regulation and battery status
Communications Port
DB9 port combines with included PowerAlert software to monitor operating conditions, monitor AC power, and enable safe unattended system shutdown
and file saves in case of a prolonged power failure
Small-Footprint Tower Housing
Mounts on wall with optional UPSWM accessory
Specifications
OUTPUT
Output Volt Amp Capacity (VA) 1500
Output kVA Capacity (kVA) 1.5
Output Watt Capacity (Watts) 940
Nominal Output Voltage(s) Supported
Nominal Voltage Details 230V nominal output in battery mode
Frequency Compatibility 50 / 60 Hz
Frequency Compatibility Details Automatic frequency selection
Output Voltage Regulation (Line Mode)
Output Voltage Regulation (Battery Mode)
Output Receptacles (6) C13
Included Output Power Cables Includes 2 C13 to C14 output power cables
Output AC Waveform (AC Mode) Sine wave
Output AC Waveform (Battery Mode) PWM sine wave
INPUT
220V; 230V; 240V
-15%, +8%
+/- 5%
Loading...
+ 3 hidden pages