Tripp Lite PDUMVR20NETLX User Manual

1.9kW Single-Phase Switched PDU, LX Platform,
Outlet Monitoring, 120V Outlets (24 NEMA 5­15/20R), L5-20P Plug, 0U, TAA

MODEL NUMBER: PDUMVR20NETLX

1.9kW vertical PDU with individual outlet metering distributes, monitors and manages single-phase power.
Built-in Java-free network interface helps you remotely monitor load levels to prevent overloads that cause
downtime.

Description

The PDUMVR20NETLX 1.9kW Single-Phase Switched PDU with individual outlet metering provides
advanced network control and remote power monitoring with the ability to turn on, turn off, reboot or lock
out power to each outlet. By reducing the frequency of on-site visits, these advanced remote capabilities
can save you money and reduce downtime.

The switched PDU features 24 individually controllable NEMA 5-15/20R outlets with cord retention
brackets to prevent cables from becoming accidentally disconnected. A 10-ft. (3.05 m) power cord with
NEMA L5-20P plug and optional 5-20P adapter connects the PDU to an AC source, generator or
protected UPS.

Highlights

●

1.9kW 120V single-phase
switched 70-inch 0U PDU

●

24 controllable NEMA 5-15/20R
outlets in 2 load banks

●

Pre-installed WEBCARDLX with
latest version of PADM20 for IP­based Auto Probe feature

●

Digital ammeter for on-site load
monitoring in real time

●

10-ft. (3.05 m) power cord with
NEMA L5-20P plug and 5-20P
adapter

Package Includes

●

PDUMVR20NETLX 1.9kW
Single-Phase Switched PDU

●

Built-in LX Platform interface

●

NEMA 5-20P plug adapter

●

Configuration cable

●

Cord retention brackets

●

(24) Cable ties

●

Rack-mounting hardware

●

PDUMVROTATEBRKT
mounting bracket accessory

●

Owner’s manual

The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU
status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports
10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2
modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported
include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and
NTP.

A digital ammeter allows you to monitor each load bank's current, each outlet's current and the total
connected PDU load in real time to ensure they remain well below maximum capacity with no danger of
overload. The switched PDU mounts in 0U of space in EIA-standard 19-inch racks using the included
toolless mounting buttons or the included rack-mounting brackets.

1 / 4

Features

Distributes, Monitors and Manages Network-Grade AC Power1.9kW 120V 20A switched PDU with

single-phase input10-ft. (3.05 m) power cord with NEMA L5-20P plug and 5-20P adapterFirmware
upgrades support future product enhancements
24 NEMA 5-15/20R Switched Outlets Distribute AC PowerIndividual outlets can be remotely controlled
to power up, power down, reboot or lock out devicesIncluded cord retention brackets prevent cables from
becoming accidentally disconnected
Digital AmmeterReports current for each load bank, each individual outlet, and total PDU loadSupports
IP-address self-IDDigits flip 180° for easy reading at either angle
Built-In LX Platform InterfacePre-installed WEBCARDLX with the latest version of PowerAlert Device
Manager firmware (PADM20) provides enhanced remote management capabilitiesPADM20 and
PowerAlert Element Manager (PAEM) form a powerful tool for expanding maintenance functions in large
installations, including firmware update checks and backup and restoration of device configurationsIP­based Auto Probe detects lost connectivity and restores service autonomously
Broad Communications CompatibilitySupports IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2c,
SNMPv3, telnet, SSH, CLI, FTP, DHCP and NTPSupports automatic and manual assignment of IP
address
Essential Safety FeaturesTiered access allows administrator and guest to log in via web
browserImmediate alert notifications via email or SNMP trapsSupports user-specified alarm notification
thresholdsReal-time clock backup maintains day/date even if PDU is unpowered
Easy 0U Installation in EIA-Standard 19 in. Racks70 in. PDU mounts vertically using included toolless
buttons or rack-mounting bracketsIncluded PDUMVROTATEBRKT allows mounting with rear-facing
outlets

TAA-CompliantCompliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

Specifications

OVERVIEW

UPC Code 037332204141
PDU Type Switched

INPUT

PDU Input Voltage 120V
Recommended Electrical Service Single-phase 20A 120V service
Maximum Input Amps 16
Maximum Input Amps Details Agency de-rated to 16A continuous
PDU Plug Type NEMA 5-20P; NEMA L5-20P
Input Phase Single-Phase
Input Cord Length (ft.) 10
Input Cord Length (m) 3.05

OUTPUT

Output Capacity Details 1.92kW (120V) / 16A total capacity; 16A max per outlet
Frequency Compatibility 50 / 60 Hz
Output Receptacles (24) 5-15/20R
Output Nominal Voltage 120V

2 / 4

Overload Protection n/a
Customized Load Management

Receptacles

Each outlet is individually controllable via remote interface

USER INTERFACE, ALERTS & CONTROLS

Front Panel LCD Display Digital display reports load level in amps for LOAD BANK 1 (Outlets 1-12), LOAD BANK 2 (Outlets 13-24), LOAD

BANKS 1&2 COMBINED (Outlets 1-24) and each individual output receptacle; Digital display can also be used to
scroll the configured IP address

Front Panel LEDs BANK 1 and BANK 2 LEDs verify which load bank the digital current display is reporting (Bank 1, Bank 2 or Banks

1&2 Combined); BANK 1 or BANK 2 LED will flash when the digital display is reporting output current for one of the
outlets in that load bank; 24 additional LEDs, one near each output receptacle, will light continuously to verify power
on/off status and flash to indicate that the digital display is reporting output current for just that individual receptacle.
LX Platform Interface: Network Link/Activity Status LED (Yellow), Network Speed LED (Green); LX Platform status
LED (Green)

Switches SELECT OUTLET and SELECT BANK switches advance the LCD screen and associated LED to display power

consumption for individual output receptacles and output load banks; Press and hold the SELECT BANK button for 4
seconds to rotate the digital display 90 degrees for overhead power input; Press and hold the SELECT OUTLET
button for 4 seconds to scroll the configured IP address. LX Platform Interface: Recessed reset switch for interface
reboot and factory reset

Current Measurement Accuracy
(Amps)

Voltage Measurement Accuracy
(Volts)

Power Measurement Accuracy
(Watts)

+/-1%

+/-1%

+/-1%

PHYSICAL

Form Factors Supported 0U vertical rackmount; includes rackmount brackets. Supports toolless mounting in button-mount compatible racks
PDU Form Factor Vertical (0U)
Shipping Dimensions (hwd / cm) 11.51 x 15.49 x 192.48
Shipping Dimensions (hwd / in.) 4.53 x 6.10 x 75.78
Shipping Weight (kg) 6.77
Shipping Weight (lbs.) 14.93
Unit Dimensions (hwd / cm) 178 x 5.6 x 5.2
Unit Dimensions (hwd / in.) 70 x 2.2 x 2.04
Unit Weight (kg) 4.35
Unit Weight (lbs.) 9.6

ENVIRONMENTAL

Operating Temperature Range 0C ~ 40C (32F ~ 104F)
Storage Temperature Range -30°C to +60°C (-22°F to +140°F)
Relative Humidity 5 to 95% non-condensing

COMMUNICATIONS

3 / 4

Network Monitoring Port RJ45 Network port, RJ45 Config/Console Access port; USB A port supports a variety of Envirosense2 environmental

and control modules. See Accessories>Management Hardware section for more information about these modules.

SNMP Compatibility Pre-installed LX platform interface provides remote monitoring via Java-free HTML5 web interface, telnet, SSH and

SPECIAL FEATURES

High Availability PDU Features Auto Probe Monitoring and Reboot (included)

STANDARDS & COMPLIANCE

Certifications Tested to UL60950-1: 2007 R12.11 (USA), CAN/CSA-C22.2 NO. 60950-1-07+A1: 2011(Canada), FCC CLASS A

WARRANTY

Product Warranty Period
(Worldwide)

SNMP management systems

PART 15 (Emissions), NOM (Mexico), RoHS compliant, TAA Compliant

2-year limited warranty

© 2021 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies

4 / 4