Tripp Lite PDUMV30HV User Manual

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +[phone]

E-mail: [e-mail]

Model #: PDUMV30HV

Metered 0U Vertical Rack PDU - Metered Power Distribution Unit for Network Applications

Highlights

Metered 0U 63.75 in. vertical rack PDU

208/240V 30A maximum capacity

Two built-in ammeters display current usage for both 15A breakered load

banks

10 ft. input cable with locking L6-30P plug and 30 output receptacles (6 C19,

24 C13)

Tooless button-mount installation

Cord retention brackets keep vital equipment plugs connected

Description

Tripp Lite Metered Power Distribution Units give IT Managers the ability to monitor network power consumption levels to prevent mains, generator,

UPS or PDU overloads and to ensure proper load balance in complex redundant power applications. Each built-in, easy to read, two-character LED

display offers continuous PDU current monitoring data in one-amp increments. Switch-free unfiltered electrical pass-through reliably distributes UPS

or generator power to multiple servers and vital networking equipment in rack enclosures, network closets and more. Tooless mounting enables

simple installation in button-mount compatible racks. Included mounting brackets support vertical installation in standard 2 and 4 post racks or other

surfaces, such as under-counter or wallmount configurations. Plug retention brackets keep vital equipment plugged in and continuously powered.

PDUMV30HV 63.75 in. vertical 0U metered rack PDU supports 30A maximum capacity at 208/240V (agency derated to 24A). Includes 10 ft.

attached line cord with L6-30P input plug. 24 C13 and 6 C19 outlets support up to 30 directly connected pieces of networking equipment. Outlets

are arranged in two separately metered and breakered 15A load banks (each with 3 C19 and 12 C13 outlets). Set of 2 built-in 2 character displays

offer continuous information on PDU power consumption for each of the two built-in loading banks.

Applications

Ideal for network configurations where a metered, non-switched PDU is required to distribute UPS or generator power to multiple pieces of

networking equipment

Package Includes

PDUMV30HV 63.75 inch basic PDU with owner's manual

Set of 2 bolt-on plug retention brackets and installation hardware

Set of mounting brackets and installation hardware

Features

208/240V 30A Metered Power Distribution Unit (PDU) in 63.75 in. 0U vertical form factor.

30A maximum capacity (Agency derated to 24A)

Attached L6-30P input plug with 10 ft. line cord

30 total output receptacles (6 C19, 24 C13)

Outlets are arranged in two separately breakered and metered 15A load banks (each with 3 C19 and 16 C13 outlets)

Current meters offer the ability to monitor network power consumption levels to prevent mains, generator, UPS or PDU overloads and to

ensure proper load balance in complex redundant power applications

Pair of easy to read, two-character LED displays offer continuous PDU current monitoring data in one-amp increments for each metered

load bank

Circuit breaker offers protection from overloads and short circuit fault conditions

Sleeved circuit breaker assembly prevents accidental shutoff and requires no tools to reset if tripped

Switch-free unfiltered electrical pass-through reliably distributes UPS or generator power to critical networking equipment

Tooless installation supports fast installation in button-mount compatible equipment racks

Included nut & bolt mounting brackets support installation in racks or other flat surfaces, such as under-counter, wallmount and other

surfaces

Cord retention brackets keep vital equipment plugs connected

Specifications

SYSTEM OVERVIEW

Voltage compatibility 208/240V

Frequency
compatibility

50/60

OUTPUT

Output nominal
voltage

208/240V

Outlet quantity / type 30 total (6 C19, 24 C13)

Overload protection Outlets are arranged in two separately breakered load banks. The top 15A breaker covers outlets on the upper half, the

bottom 15A breaker covers outlets on the lower half of the PDU. Each breakered bank covers 12 C13 and 3 C19
outlets.

INPUT

Maximum input amps 30A maximum (Agency de-rated to 24A continuous)

Input connection type L6-30P (208/240V 30A)

Input cord length 10 ft.

Recommended
Electrical Service

208V, 240V

LEDS ALARMS & SWITCHES

Front panel LEDs Includes 2 built-in 2-character LED meters to display power consumption of items plugged into each separately

breakered 15A loading bank.

Switches n/a

PHYSICAL

Shipping weight (lbs) 13

Shipping weight (kg) 5.9

Shipping Dimensions
(HWD/in)

64.5 x 3.5 x 4.75

Shipping Dimensions
(HWD/cm)

163.8 x 8.9 x 12.1

Unit weight (lbs) 8

Unit weight (kg) 3.6

Unit Dimensions
(HWD/in)

63.75 x 2.25 x 3.75

Unit Dimensions
(HWD/cm)

162 x 5.7 x 9.5

Material of
construction

Aluminum

Form factors
supported

0u vertical installation in equipment racks, plus under-counter and wallmount

Style Vertical Rackmount, Wallmount, Raceway, Workbench

ENVIRONMENTAL