Tripp Lite PDUMV20HV User Manual

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +[phone]

E-mail: [e-mail]

Model #: PDUMV20HV

Metered 0U Vertical Rack PDU - Metered Power Distribution Unit for Network Applications

Highlights

Metered 0U 63.75 in. vertical rack PDU

208/230/240V 20A maximum capacity

Built-in ammeter displays whole-PDU current usage

10 ft. detachable input cable with locking L6-20P plug and 38 output

receptacles (6 C19, 32 C13)

Tooless button-mount installation

Cord retention brackets keep vital equipment plugs connected

Description

Tripp Lite Metered Power Distribution Units give IT Managers the ability to monitor network power consumption levels to prevent mains, generator,

UPS or PDU overloads and to ensure proper load balance in complex redundant power applications. Each built-in, easy to read, two-character LED

display offers continuous PDU current monitoring data in one-amp increments. Switch-free unfiltered electrical pass-through reliably distributes UPS

or generator power to multiple servers and vital networking equipment in rack enclosures, network closets and more. Tooless mounting enables

simple installation in button-mount compatible racks. Included mounting brackets support vertical installation in standard 2 and 4 post racks or other

surfaces, such as under-counter or wallmount configurations. Plug retention brackets keep vital equipment plugged in and continuously powered.

PDUMV20HV 63.75 in. vertical 0U metered rack PDU supports 20A maximum capacity at 208/230/240V (agency derated to 16A). Includes 10 ft.

detachable line cord with L6-20P input plug. 32 C13 and 6 C19 outlets support up to 38 directly connected pieces of networking equipment. Outlets

are arranged in a single unbreakered load bank. Built-in 2 character displays offer continuous information on PDU power consumption.

Applications

Ideal for network configurations where a metered, non-switched PDU is required to distribute UPS or generator power to multiple pieces of

networking equipment

Package Includes

PDUMV20HV 63.75 inch basic PDU with owner's manual

Set of 2 bolt-on plug retention brackets and installation hardware

Set of mounting brackets and installation hardware

Features

208/230/240V 20A Metered Power Distribution Unit (PDU) in 63.75 in. 0U vertical form factor.

20A maximum capacity (Agency derated to 16A)

L6-20P input plug with 10 ft. line cord (detachable via C20 inlet)

38 total output receptacles (6 C19, 32 C13)

Outlets are arranged in a single unbreakered, metered 20A load bank

Current meter offers the ability to monitor network power consumption levels to prevent mains, generator, UPS or PDU overloads and to

ensure proper load balance in complex redundant power applications

Easy to read, two-character LED display offers continuous whole-PDU current monitoring data in one-amp increments

Circuit breaker free format prevents power interruptions due to tripped breakers while still providing mains panel protection from overloads

and short circuit fault conditions

Switch-free unfiltered electrical pass-through reliably distributes UPS or generator power to critical networking equipment

Tooless installation supports fast installation in button-mount compatible equipment racks

Included nut & bolt mounting brackets support installation in racks or other flat surfaces, such as under-counter, wallmount and other

surfaces

Cord retention brackets keep vital equipment plugs connected

Specifications

SYSTEM OVERVIEW

Voltage compatibility 208/240V

Frequency compatibility 50/60

OUTPUT

Output nominal voltage 208/230/240V

Outlet quantity / type 38 total (6 C19, 32 C13)

Overload protection Outlets are arranged in a single unbreakered load bank

INPUT

Maximum input amps 20A maximum (Agency de-rated to 16A continuous)

Input connection type L6-20P (208/240V 20A) - detachable via C20 inlet

Input cord length 10 ft.

Recommended Electrical
Service

208V, 240V

LEDS ALARMS & SWITCHES

Front panel LEDs Includes built-in 2-character LED meter to display whole PDU power consumption

Switches n/a

PHYSICAL

Shipping weight (lbs) 6

Shipping weight (kg) 2.8

Shipping Dimensions
(HWD/in)

64.5 x 3.5 x 4.75

Shipping Dimensions
(HWD/cm)

163.8 x 8.9 x 12.1

Unit weight (lbs) 5.2

Unit weight (kg) 2.4

Unit Dimensions (HWD/in) 63.75 x 2.25 x 3.75

Unit Dimensions (HWD/cm) 162 x 5.7 x 9.5

Material of construction Aluminum

Form factors supported 0u vertical installation in equipment racks, plus under-counter and wallmount

Style Vertical Rackmount, Wallmount, Raceway, Workbench

ENVIRONMENTAL

Relative Humidity 0-95% non-condensing

CERTIFICATIONS

Certifications Tested to UL60950-1 (USA, Canada), NOM (Mexico), CE (IEC 60950)

WARRANTY

Product Warranty Period Lifetime