Tripp Lite PDUMNV32HV2LX User Manual

7.7kW Single-Phase Monitored PDU, LX
Interface, 200-240V Outlets (36 C13/6 C19), IEC
309 32A Blue, 10 ft. (3.05 m) Cord, 0U 1.8m/70 in.
Height, TAA

MODEL NUMBER: PDUMNV32HV2LX

7.7kW 0U PDU distributes and monitors single-phase power in an IT or industrial environment. Built-in
Java-free network interface helps you remotely monitor load levels to prevent overloads that cause
downtime.

Description

The PDUMNV32HV2LX 7.7kW Single-Phase Monitored PDU provides real-time remote monitoring of
voltage, frequency and load levels via built-in network connection. By reducing the frequency of on-site
visits, these advanced remote capabilities can save you money and reduce downtime.

Highlights

●

7.7kW 200-240V single-phase
monitored 0U PDU

●

42 outlets—36 C13, 6
C19—with plug-lock insert
sleeves

●

Pre-installed WEBCARDLX with
latest version of PADM20 for
enhanced remote management

●

Digital ammeter for on-site load
monitoring in real time

●

IEC 309 32A Blue (2P+E) input
with 10-ft. (3.05 m) AC power
cord

Package Includes

●

PDUMNV32HV2LX 7.7kW
Single-Phase Monitored PDU

●

Built-in LX Platform interface

●

Configuration cable

●

(42) Plug-lock insert sleeves

●

Rack-mounting hardware

●

PDUMVROTATEBRKT
mounting bracket accessory

●

Owner’s manual

The 0U PDU features 42 outlets (36 C13 and 6 C19) with included plug-lock insert sleeves to prevent
cables from becoming accidentally disconnected. A 10-ft. (3.05 m) cord with IEC 309 32A Blue (2P+E)
plug connects the PDU to a compatible AC power source, generator or protected UPS.

The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU
status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports
10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2
modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported
include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and
NTP.

A digital ammeter allows you to monitor each load bank's current and the total connected PDU load in real
time to ensure they remain well below maximum capacity with no danger of overload. The PDU mounts in
0U of space in EIA-standard 19-inch racks using the included toolless mounting buttons or the included
rack-mounting brackets. Use the included PDUMVROTATEBRKT kit to install the unit with outlets facing
the rear for better airflow or equipment access.

1 / 4

Features

Distributes and Monitors Network-Grade Single-Phase Power

●

7.7kW 200-240V monitored PDU with single-phase input

●

IEC 309 32A Blue (2P+E) plug with 10-ft. (3.05 m) cord connects to compatible AC power source

●

Firmware upgrades support future product enhancements

42 Outlets Distribute AC Power

●

36 C13 and 6 C19 outlets split into 2 separately breakered 20A load banks

●

Plug-lock insert sleeves prevent cables from becoming accidentally disconnected

Digital Ammeter

●

Reports current for each load bank and total connected PDU load

●

Supports IP-address self-ID

●

Rotates 180° for easy reading at either angle

●

Measurement accuracy plus minus 1A

Built-In LX Platform Interface

●

Pre-installed WEBCARDLX with the latest version of PowerAlert Device Manager firmware (PADM20)
provides enhanced remote management capabilities

●

PADM20 and PowerAlert Element Manager (PAEM) form a powerful tool for expanding maintenance
functions in large installations, including firmware update checks and backup and restoration of device
configurations

●

Supports 10/100 Mbps auto-sensing for communication with an Ethernet network

●

Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring
capabilities

●

No Java required

Broad Communications Compatibility

●

Supports IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP
and NTP

●

Supports automatic and manual assignment of IP address

Essential Safety Features

●

Tiered access allows administrator and guest to log in via web browser

●

Immediate alert notifications via email or SNMP traps

●

Supports user-specified alarm notification thresholds

●

Real-time clock backup maintains day/date even if PDU is unpowered

Easy 0U Installation in EIA-Standard 19 in. Racks

●

Mounts vertically using included toolless buttons or rack-mounting brackets

●

Included PDUMVROTATEBRKT allows mounting with rear-facing outlets

TAA-Compliant

●

Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

2 / 4

Specifications

OVERVIEW

UPC Code 037332204899
PDU Type Monitored

INPUT

PDU Input Voltage 200-240V
Recommended Electrical Service Single-phase 32A 200-240V service
Maximum Input Amps 32
PDU Plug Type IEC-309 32A BLUE (2P+E)
Input Phase Single-Phase
Input Cord Length (ft.) 10
Input Cord Length (m) 3.05

OUTPUT

Output Capacity Details 7.7kW (240V), 7.4kW (230V), 7kW (220V), 6.7kW (208V), 6.4kW (200V) / 32A total capacity; 16A max per

Frequency Compatibility 50 / 60 Hz
Output Receptacles (36) C13; (6) C19
Output Nominal Voltage 200-240V
Overload Protection Two 20A circuit breakers protect 21 outlets each

USER INTERFACE, ALERTS & CONTROLS

Front Panel LCD Display Digital meter reports PDU output current in amps, Scroll IP-address information; Display can be rotated 180 degrees

Front Panel LEDs Front panel LEDs indicate which loading segment the digital LCD current display is reporting; Bank 1 LED indicates

Switches Press the SCROLL IP button and release to display the configured IP address in 2 digit intervals; Press the SELECT

PHYSICAL

Form Factors Supported 0U vertical rackmount installation supported with included mounting brackets; supports toolless mounting in button-

Material of Construction Metal

breakered outlet bank; 16A max per C19 outlet; 10A max per C13 outlet

for installation with the input cable at the top

the meter is reporting load level for outlets 1-21; Bank 2 LED indicates the meter is reporting load level for outlets
22-42; Both LEDs lighted indicates the meter is reporting load level for all outlets combined

/ ROTATE button and release after one second to advance the local display power power consumption for the 3
reported segments: Bank 1, Bank 2 and Banks 1+2; Press the SELECT / ROTATE button and release after two
seconds to rotate the display 180 degrees

mount compatible racks

PDU Form Factor Vertical (0U)
Shipping Dimensions (hwd / cm) 13.21 x 16.26 x 185.42
Shipping Dimensions (hwd / in.) 5.20 x 6.40 x 73.00

3 / 4

Shipping Weight (kg) 6.67
Shipping Weight (lbs.) 14.70
Unit Dimensions (hwd / cm) 177,8 x 5,6 x 6,7
Unit Dimensions (hwd / in.) 70 x 2.2 x 2.65
Unit Weight (kg) 4.40
Unit Weight (lbs.) 9.7

ENVIRONMENTAL

Operating Temperature Range 0C ~ 50C (32F ~ 122F)
Storage Temperature Range -30°C to +60°C (-22°F to +140°F)
Relative Humidity 5-95% non-condensing
Operating Elevation (ft.) 0-10,000
Operating Elevation (m) 0-3000

COMMUNICATIONS

SNMP Compatibility Pre-installed LX platform interface provides remote monitoring via Java-free HTML5 web interface, telnet, SSH and

SPECIAL FEATURES

High Availability PDU Features Auto Probe Monitoring (included)

STANDARDS & COMPLIANCE

Certifications Tested to IEC60950-1: 2005 2nd Edition; EN 60950-1: 2006 (CE), CE Class A (Emissions), RoHS compliant, TAA

WARRANTY

Product Warranty Period
(Worldwide)

SNMP management systems

Compliant

2-year limited warranty

© 2021 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies

4 / 4