1.9kW Single-Phase Monitored PDU with LX
Platform Interface, 120V Outlets (24 5-15/20R), 0U
Vertical, 70 in., TAA
MODEL NUMBER: PDUMNV20LX
Cost-effective 1.9kW PDU distributes and monitors single-phase power in an IT or industrial environment.
Built-in network interface helps monitor load levels to prevent overloads that cause downtime.
Description
The PDUMNV20LX 1.9kW Single-Phase Monitored PDU provides real-time remote monitoring of voltage,
frequency and load levels via built-in network connection. Recommended for any IT or industrial
application, it features 24 NEMA 5-15/20R outlets with included cord retention brackets to prevent cables
from becoming accidentally disconnected. A 10-ft. (3.05 m) cord with NEMA L5-20P plug and 5-20P
adapter connects the PDU to a compatible AC power source, generator or protected UPS.
Highlights
●
1.9kW 120V 16A monitored
PDU
●
24 NEMA 5-15/20R outlets with
cord retention brackets
●
NEMA L5-20P input with 5-20P
adapter and 10-ft. (3.05 m) AC
power cord
●
Digital ammeter for on-site load
monitoring in real time
●
Pre-installed WEBCARDLX with
latest version of PADM20 for
enhanced remote management
Package Includes
●
PDUMNV20LX 1.9kW SinglePhase Monitored PDU
●
Configuration cable
●
(24) Cable ties
●
(2) Cord retention brackets
●
NEMA 5-20P adapter
●
Rack-mounting hardware
●
PDUMVROTATEBRKT
mounting bracket accessory
●
Owner’s manual
The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU
status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports
10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2
modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported
include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.
A digital ammeter allows you to monitor the PDU's current level in real time to ensure it remains well
below maximum capacity with no danger of overload. The PDU mounts in 0U of space in EIA-standard
19-inch racks using the included toolless mounting buttons or the included rack-mounting brackets. Use
the included PDUMVROTATEBRKT kit to install the unit with outlets facing the rear for better airflow or
equipment access.
Features
Distributes Network-Grade Single-Phase Power
●
1.9kW 120V 16A monitored PDU with single-phase input/output
●
NEMA L5-20P with 10-ft. (3.05 m) cord connects to compatible AC power source
1 / 4
●
NEMA 5-20P adapter converts locking input plug to straight-blade plug
●
Firmware upgrades support future product enhancements
24 Outlets Distribute AC Power
●
24 NEMA 5-15/20R outlets
●
Cord retention bracket prevents cables from becoming accidentally disconnected
Digital Ammeter
●
Reports total connected equipment load
●
Supports IP-address self-ID
●
Rotates 180° for easy reading at either angle
Built-In LX Platform Interface
●
Pre-installed WEBCARDLX with the latest version of PowerAlert Device Manager firmware (PADM20)
provides enhanced remote management capabilities
●
PADM20 and PowerAlert Element Manager (PAEM) form a powerful tool for expanding maintenance
functions in large installations, including firmware update checks and backup and restoration of device
configurations
●
Allows full remote access for power monitoring with email notifications via secure web browser, SNMP,
telnet or SSH
●
Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring
capabilities
●
No Java required
Broad Communications Compatibility
●
Supports HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP
●
Supports automatic and manual assignment of IP address
Easy 0U Installation in EIA-Standard 19 in. Racks
●
Mounts vertically using included toolless buttons or rack-mounting brackets
●
Included PDUMVROTATEBRKT allows mounting with rear-facing outlets
TAA-Compliant
●
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
Specifications
OVERVIEW
UPC Code 037332205308
2 / 4