Tripp-Lite P960-001-M2-NE Data Sheet

M.2 NGFF SSD (B-Key) to 2.5 in. SATA Open­Frame Housing Adapter

MODEL NUMBER: P960-001-M2-NE

M.2 SSD to SATA adapter increases performance of your 2.5 in. SATA application when connected to an
M.2 NGFF SATA SSD drive.

Features

SSD to SATA Adapter Improves Performance of Your SATA ComputerThis adapter converts your

M.2 NGFF SSD drive into a 2.5-inch SATA SSD for use with a standard SATA-enabled computer. The
open-frame P960-001-M2-NE supports mount drive heights of 2242, 2260 and 2280, as well as data
transfer rates up to 6 Gbps. Adding an M.2 NGFF SSD to your application can reduce your computer’s
power consumption and boost performance.
Open-Frame Housing Helps Keep the Intricate Electronic Components CoolThe open frame is
designed for maximum heat dissipation, keeping the adapter cool to boost its performance potential. To
share data, simply connect the SATA drive to the M.2 NGFF connector and then the SATA connector to
your computer’s SATA port.
Just Plug and Play for Immediate Use Right Out of the PackageNo software, drivers or external power
supply is required. Mounting hardware is included. The P960-001-M2-NE is compatible with all major
operating systems, including Windows, Mac and Linux.

Highlights

●

Connects 2242, 2260 and 2280
M.2 SATA SSD drives to your

2.5 in. SATA application

●

Shares data at rapid transfer
speeds up to 6 Gbps (SATA
I/II/III)

●

Open-frame housing provides
maximum airflow to keep
electronics cool

●

Works with all major operating
systems, including Windows,
Mac and Linux

●

Plug-and-play operation with no
software required for easy,
immediate installation

Applications

●

Access old data or back up new
data on an M.2 NGFF SSD
using a SATA-enabled computer

System Requirements

●

SATA host device

●

B-Key or B+M Key M.2 NGFF
SATA drive

●

PCle drives not supported

Specifications

OVERVIEW

1 / 2

Package Includes

●

P960-001-M2-NE M.2 NGFF
SSD to 2.5 in. SATA Open­Frame Housing Adapter

●

Mounting hardware

●

Screwdriver

●

Owner’s manual

UPC Code 037332242600
Drives Supported 2242, 2260, 2280 M.2 NGFF SSD

INPUT

Bus Powered Yes

USER INTERFACE, ALERTS & CONTROLS

LED Indicators Yellow (Data & Power)

PHYSICAL

Color Green
Shipping Dimensions (hwd / in.) 1.10 x 4.80 x 6.10
Unit Dimensions (hwd / in.) 0.28 x 3.92 x 2.76
Unit Weight (kg) 0.05
Unit Weight (lbs.) 0.11

ENVIRONMENTAL

Operating Temperature Range 50 to 122°F (10 to 50°C)
Storage Temperature Range 32 to 149°F (0 to 65°C)
Relative Humidity 10% to 80% RH, Non-Condensing

CONNECTIONS

Side A - Connector 1 M.2 NGFF SATA (B-Key)
Side B - Connector 1 22 PIN SATA + POWER (FEMALE)

FEATURES & SPECIFICATIONS

Driver Required No
Technology SATA/eSATA

STANDARDS & COMPLIANCE

Certifications Tested to CE, FCC, RoHS and REACH

WARRANTY

Product Warranty Period
(Worldwide)

1-year limited warranty

© 2020 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https:// products/product-certification-agencies

2 / 2