Tripp Lite DWF4585X Users Guide

Owner’s Manual

Fixed Flat Screen

Wall Mount

MODEL: DWF4585X

CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR
PROPERTY DAMAGE MAY OCCUR!

200x200/300x300/
400x200/400x400/
600x400/800x400

Este manual esta disponible en español en la página de Tripp Lite: www.tripplite.com

Ce manuel est disponible en français sur le site Web de Tripp Lite : www.tripplite.com

Русскоязычная версия настоящего руководства представлена на веб-сайте компании

Tripp Lite по адресу: www.tripplite.com

Dieses Handbuch ist in deutscher Sprache auf der Tripp Lite-Website verfügbar: www.tripplite.com

85”

MAX

91 kg

(200 lbs)

MAX

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Copyright © 2014 Tripp Lite. All rights reserved.

14-11-076-9333E1.indd 1 11/12/2014 3:40:43 PM

1

NOTE: Read the entire instruction manual before you start installation and assembly.

WARNING

• Do not begin the installation until you have read and understood the instructions
and warnings contained in this manual. If you have any questions regarding any
of the instructions or warnings, please visit www.tripplite.com/support.

• This mounting bracket was designed to be installed and utilized ONLY as
specified in this manual. Improper installation of this product may cause damage
or serious injury.

• This product should only be installed by someone of good mechanical ability, with
basic building experience and a full understanding of this manual.

• Make sure that the supporting surface will safely support the combined load of
the equipment and all attached hardware and components.

• If mounting to wood wall studs, make sure that mounting screws are anchored
into the center of the studs. The use of a stud finder is highly recommended.

• Always use an assistant or mechanical lifting equipment to safely lift and position
equipment.

• Tighten screws firmly, but do not over tighten. Over tightening can damage the
items, greatly reducing their holding power.

• This product is intended for indoor use only. Using this product outdoors could
lead to product failure and personal injury.

Warranty & Product Registration

5-Year Limited Warranty

Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects
in material and workmanship for a period of 5 years from the date of initial purchase. If the product should
prove defective in material or workmanship within that period, Seller will repair or replace the product, in its sole
discretion.

THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE,
ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY
SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES,
INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY
PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL
DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and some states do not
allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions
may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from
jurisdiction to jurisdiction).

WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate
or safe for the use intended. Since individual applications are subject to great variation, the manufacturer makes
no representation or warranty as to the suitability or fitness of these devices for any specific application.

PRODUCT REGISTRATION

Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a
drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.

2

14-11-076-9333E1.indd 2 11/12/2014 3:40:44 PM

Component Checklist

IMPORTANT: Ensure that you have received all parts according to the component checklist prior to

installing. If any parts are missing or faulty, visit www.tripplite.com/support for service.

Wall Plate (x1)

Adapter Bracket (x2)

Package M

M5X14 (x4)

M8X30 (x4)

Package W

Anchor Bolt (x6) Concrete Anchor (x6) D8 Washer (x6)

M6X14 (x4)

Washer (x4)

M8X20 (x4)

Small Spacer (x8)

3

M6X30 (x4)

Big Spacer (x4)

14-11-076-9333E1.indd 3 11/12/2014 3:40:44 PM

1a. Wood Stud Wall Mounting

{Fits 406mm (16”) / 450mm (17.7”) / 600mm (23.6”)/610mm (24”) stud}

Find and mark the
exact location of
mounting holes

D8 Washer

Anchor Bolt

Drill pilot holes

Fasten the wall
plate onto the
wall

WARNING

• Make sure that mounting screws are anchored into the center of the studs.
Use of a stud finder is highly recommended.

• Installers are responsible to provide hardware for other types of mounting situations.

• Installers must verify that the supporting surface will safely support the combined
load of the equipment and all attached hardware and components.

4

14-11-076-9333E1.indd 4 11/12/2014 3:40:45 PM

1b. Solid Brick and Concrete Mounting

Concrete Anchor

D8 Washer

Anchor Bolt

Find and mark the
exact location of
mounting holes

Drill pilot holes

Fasten the wall
plate onto the
wall

WARNING

• When installing wall mounts on cinder block, verify the actual concrete thickness
is at least 1-3/8” (35mm) for using the concrete anchors. Do not drill into mortar
joints! Be sure to mount in a solid part of the block, generally 1” (25mm) minimum
from the side of the block. It is suggested an electric drill on a slow setting be used
to drill the hole instead of a hammer drill to avoid breaking out the back of the hole
when entering a void or cavity.

• Installers must verify that the supporting surface will safely support the combined
load of the equipment and all attached hardware and components.

5

14-11-076-9333E1.indd 5 11/12/2014 3:40:46 PM

2. Installing the Adapter Brackets

2-1 For Flat Back Screen

M5x14
M6x14
M8x20

Washer

2-2 For Recessed Back Screen or

to Access A/V Inputs

Top

Note: Choose appropriate screws, washers and spacers
(if necessary) according to the type of screen.

• Position the adapter brackets as close as possible to
the center of the display.

• Screw the adapter brackets onto the display.

Tighten all screws but do not over tighten.

Top

M8x20

Small

Spacer

Washer

or

Small Spacer

Small Spacer

M8x20
M6x30
M8x30

Washer

M6x30
M8x30

Washer

or

Big Spacer

M6x30
M8x30

or

Washer

Small
Spacer

Big
Spacer

6

14-11-076-9333E1.indd 6 11/12/2014 3:40:47 PM

3. Hang Display onto the Wall Plate

Wall

• Before releasing the display, make sure adapter brackets have been safely attached to the wall plate.

• Secure the bracket by tightening the two bolts with the proper Phillips screwdriver.

Wall

Bolt

Maintenance

• Check that the bracket is secure and safe to use at regular intervals (at least every three months).

• Please visit www.tripplite.com/support if you have any questions.

7

14-11-076-9333E1.indd 7 11/12/2014 3:40:48 PM

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

8

14-11-076-9333E1.indd 8 11/12/2014 3:40:51 PM

14-11-076 93-33E1_RevB