Tripp Lite DMCSD3545M Owner's Manual

Owner’s Manual

Dual Flat-Panel

Mobile Cart

Model: DMCSD3545M

200x200 / 300x200
300x300 / 400x200
400x300 / 400x400

Este manual esta disponible en español en la página de Tripp Lite:

Ce manuel est disponible en français sur le site Web de Tripp Lite :

Русскоязычная версия настоящего руководства представлена на

веб-сайте компании Tripp Lite по адресу: www.tripplite.com

Dieses Handbuch ist in deutscher Sprache auf der Tripp Lite-Website

verfügbar: www.tripplite.com

PROTECT YOUR INVESTMENT!

Register your product for quicker service and ultimate peace of mind.

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

www.tripplite.com/warranty

45"

MAX

www.tripplite.com

www.tripplite.com

88 lb. x 2

(40 kg x 2)

TV

11 lb.
(5 kg)

DVD

11 lb.
(5 kg)

WEBCAM

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Copyright © 2019 Tripp Lite. All rights reserved.

1

19-04-452-933908-EN.indd 1 5/6/2019 9:43:43 AM

NOTE: Read the entire instruction manual before you start assembly and
installation.

WARNING

• Do not begin the installation until you have read and understood
the instructions and warnings contained in this manual. If you have
questions regarding any of the instructions or warnings, please visit
www.tripplite.com/support.

• This product was designed to be installed and utilized ONLY as specified
in this manual. Improper installation of this product may cause damage
or serious injury.

• This product should only be installed by someone of good mechanical
ability, with basic building experience and a full understanding of this
instruction manual.

• Make sure the unit can safely support the combined load of the
equipment and all attached hardware and components.

• Always use an assistant or mechanical lifting equipment to safely lift
and position equipment.

• This product is intended for indoor use only. Using this product outdoors
could lead to product failure and/or personal injury.

Warranty and Product Registration

5-Year Limited Warranty

Seller warrants this product, if used in accordance with all applicable instructions, to be free from original
defects in material and workmanship for a period of 5 years from the date of initial purchase. If the product
should prove defective in material or workmanship within that period, Seller will repair or replace the
product, in its sole discretion.

THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT,
MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY
EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED
WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION
TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL
INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied
warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal
rights, and you may have other rights which vary from jurisdiction to jurisdiction).

WARNING: The individual user should take care to determine prior to use whether this device is suitable,
adequate or safe for the use intended. Since individual applications are subject to great variation, the
manufacturer makes no representation or warranty as to the suitability or fitness of these devices for any
specific application.

PRODUCT REGISTRATION

Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered
into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Photos and illustrations may differ slightly from actual products.

2

19-04-452-933908-EN.indd 2 5/6/2019 9:43:43 AM

Component Checklist

IMPORTANT: Ensure you have received all parts according to the component
checklist prior to installing. If any parts are missing or faulty,
visit www.tripplite.com/support for service.

A

Left Plastic Cover

Left Column

Left Adapter Brackets

L

Camera Shelf

Right Plastic Cover

B

E

Universal Plate

H

J

M

Connecting Plate

P

Left Base

C

Middle Base

Right Adapter Brackets

N

Crossbar

Q

Right Base

D

DVD Shelf

F

Top CoversG Cable Covers

I

Right Column

K

O

Support Bar

3

19-04-452-933908-EN.indd 3 5/6/2019 9:43:43 AM

Component Checklist

Package P

P-A

Butterfly Nuts

P-E

M6x14

P-F

M6x25

D8 Washers

Package M

M-A

M5x14

P-B

Butterfly Nuts

P-G

M6x8

P-L

P-H

M6x14

P-M

D6 Washers

M-B

M6x14

P-C

M8x30

P-I

M8x65

P-N

5 mm Hex Key

M-C

M8x20

M8x40

P-J

M4x6

P-O

Wrench

P-D

P-K

M4x6

M-D

M6x30

M-E

M8x30

M-F

Washer

M-G

Small Spacer

M-H

Big Spacer

4

19-04-452-933908-EN.indd 4 5/6/2019 9:43:43 AM

Assembly

Assemble the Base

1

Q

P

C

P-D

P-N

Using M8x40 screws (P-D) and the 5 mm hex key (P-N), attach the right base to the
middle base. Repeat this step for the left base.

B

A

P-O

Note: Lock the brakes on the casters to avoid any sudden movements during installation.

Each caster can be adjusted independently for fine adjustments. Slightly turn each caster
nut to lower or raise the base.

5

19-04-452-933908-EN.indd 5 5/6/2019 9:43:44 AM

Assembly

Attach the Columns to the Base

2

Inner
Column

Pin

I

Tighten
the Safety

H

Pin

Pull the pin outward and lift the inner column upward at the same time until the inner
column is at the desired height. Release the pin to secure.

H

I

Screw.

V

Using M8x30 screws (P-C),

attach the columns to the base.

6

19-04-452-933908-EN.indd 6 5/6/2019 9:43:45 AM

P-C

Assembly

Install the Crossbar

3

H

Using M6x14
screws (P-H),
attach the crossbar
to the columns.

Install the Cable Covers

4

P-H

Once the crossbar
installation is
completed, use
the 5 mm hex key
(P-N) to tighten the
bottom screws on
the base.

G

7

19-04-452-933908-EN.indd 7 5/6/2019 9:43:45 AM

Assembly

5

Install the Universal Plate

P-B

P-L

E

P-I

Using M8x65 screws (P-I),
D8 washers (P-L) and butterfly
nuts (P-B), attach the universal
plate to the columns.

8

19-04-452-933908-EN.indd 8 5/6/2019 9:43:46 AM

Assembly

6

Install the Adapter Brackets

J K

6a

Install the Adapter Brackets

For Flat-Back Screen

Top of the

display.

M-A

M-F

M-B
M-C

M-F

Note: Choose appropriate screws and washers according to the type of screen.

• Screw the adapter brackets onto the display.

Tighten all screws, but do not over-tighten.

9

19-04-452-933908-EN.indd 9 5/6/2019 9:43:46 AM

Assembly

6b

Install the Adapter Brackets

For Recessed-Back Screen or to Access A/V Inputs

M-C

M-F

M-G

Note: Choose appropriate screws, washers and spacers (if necessary) according to the type

of screen.

• Screw the adapter brackets onto the display.

Tighten all screws, but do not over-tighten.

M-C
M-D
M-E

M-G

M-F M-F

M-D
M-E

M-H

M-D
M-E

M-F

M-G
M-H

10

19-04-452-933908-EN.indd 10 5/6/2019 9:43:47 AM

Assembly

7

Attach the Displays onto the Universal Plate

F

• Hang the displays onto the universal plate.

• Tighten the bottom screws to secure.

Make sure the displays are mounted correctly and the
screws are tightened safely before releasing the
displays.

11

19-04-452-933908-EN.indd 11 5/6/2019 9:43:47 AM

Assembly

Install the Camera Shelf

8

L

M

P-J

Using M4x6 screws (P-J) and (P-K), attach the camera shelf to the connecting plate.

P-F

P-M

Using M6x25 screws (P-F) and D6 washers (P-M), attach the connecting plate to the
universal plate.

P-K

12

19-04-452-933908-EN.indd 12 5/6/2019 9:43:48 AM

Assembly

Install the DVD Shelf

9

O

P-G

Using M6x8 screws (P-G), attach the support bar to the columns at the desired position.

D

P-A

P-F

P-H

P-A

Using M6x25 screws (P-F), M6x8 screws (P-H) and butterfly nuts (P-A), attach the DVD
shelf to the support bar.

13

19-04-452-933908-EN.indd 13 5/6/2019 9:43:49 AM

Assembly

Cable Management

10

Route the cables through
the cable covers.

14

19-04-452-933908-EN.indd 14 5/6/2019 9:43:50 AM

Assembly

Adjustment

11

+10°

–10°

• Adjust the columns to the desired height before installing the display.

• If adjusting the column height after completing the display installation,
first remove the DVD shelf, then adjust the columns to the desired
height.

TV height is measured
from the floor to the TV
center.

15

19-04-452-933908-EN.indd 15 5/6/2019 9:43:51 AM

Maintenance

• Check that the bracket is secure and safe to use at regular intervals (at
least every three months).

• Please visit www.tripplite.com/support if you have any questions.

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

16

19-04-452-933908-EN.indd 16 5/6/2019 9:43:51 AM

19-04-452 93-3908_RevB