Single-Display Flex-Arm Desktop Clamp for 17”
to 32” Flat-Screen Displays - USB and Audio
Ports, Aluminum
MODEL NUMBER: DDR1732SAL
Highlights
●
Sturdy aluminum frame clamps
securely to your desk for
mounting your display
●
-90° to +90° tilt, -90° to +90°
swivel and 90° rotation help you
find the perfect angle
●
Base includes a USB 3.0 port
and dual 3.5 mm audio ports for
connecting peripherals
●
Durable aluminum flex arm
blends into any décor and
supports up to 19.8 lb.
●
VESA compliance ensures
compatibility with 75 x 75 and
100 x 100 mounting patterns
Aluminum desk clamp mounts your 17 to 32 in. monitor at a comfortable height to free up valuable space
on your desk or work area.
Features
Rugged Aluminum Desk Clamp Lifts Your Monitor Above Your Work Area’s Surface
This VESA-compliant desktop clamp mounts a flat-screen display above your desk, table or workstation,
allowing you to free up valuable surface space. Recommended for home or office use, the DDR1732SAL
fits most flat-panel monitors from 17 to 32 inches. The durable aluminum frame tolerates frequent
adjustments, and the swiveling aluminum arm supports up to 19.8 pounds. Instead of clamping the unit to
your desktop, you may install it using the included grommet. All hardware is included. Cable management
brackets along the arms prevent excess cord clutter.
Swivel, Tilt and Rotate the Screens to Find the Most Comfortable Viewing Angles
The flex arm adjusts independently to optimize viewing angles, minimize glare and improve ergonomics.
To minimize screen glare, reduce eye fatigue and increase viewing comfort, the mount features -90° to
+90° tilt, -90° to +90° swivel and 90° rotation for positioning your screen. Easy screen adjustment lets you
quickly find just the right angle without interrupting your workday.
Connect Your Favorite Devices to Help You Get Through the Workday
The base of the DDR1732SAL features a USB 3.0 port for connecting a smartphone or other USB device.
Two 3.5 mm audio jacks allow connection of a microphone and speakers.
VESA-Compliant Mounting Ensures Display Compatibility
VESA (Video Electronics Standards Association) promotes uniformity in the video electronics industry by
developing standards for TVs and monitors. For hassle-free display compatibility, this monitor stand
supports the following VESA mounting hole patterns: 75 x 75 and 100 x 100.
Specifications
Applications
●
Lift a monitor above your
standing desk or workstation to
free up valuable surface space
●
Swivel, tilt and/or rotate your
screen for the most comfortable
viewing angle
System Requirements
Flat-screen monitors from 17 to 32
in.
Package Includes
●
DDR1732SAL Single-Display
Flex-Arm Desktop Clamp
●
Mounting hardware
●
Owner’s manual
OVERVIEW
UPC Code 037332262493
1 / 2
Device Compatibility Monitor/HDTV
PHYSICAL
VESA Pattern (mm) 75x75; 100x100
Color Silver
Degrees of Motion -90/+90 for Tilt, Swivel and Rotate
Material of Construction Steel
Maximum Screen Size (cm) 81.3
Maximum Screen Size (in.) 32
Maximum Weight Capacity (kg) 9
Maximum Weight Capacity (lbs.) 19.8
Minimum Screen Size (in.) 17
Minimum Screen Size (cm) 43.2
Motion Full
Mounting Location Desk Clamp; Grommet
Number of Displays 2
Unit Dimensions (hwd / cm) 82.4 x 62.74 x 11.43
Unit Dimensions (hwd / in.) 32.3 x 24.7 x 4.5
Unit Weight (kg) 4.63
Unit Weight (lbs.) 10.2
FEATURES & SPECIFICATIONS
Tools Necessary Yes
SPECIAL FEATURES
Cord Management Yes
STANDARDS & COMPLIANCE
Approvals RoHS3, REACH
WARRANTY
Product Warranty Period
(Worldwide)
5-year limited warranty
© 2021 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies
2 / 2