Tripp Lite B122-000 User Manual 2

Warranty

Registration

chance to win a FREE Tripp Lite

product! www.tripplite.com/warranty

Owner’s Manual

HDMI Extender

Model: B122-000

Tripp Lite World Headquarters

1111 W. 35th Street, Chicago, IL 60609 USA

(773) 869-1234 • www.tripplite.com

NOTE: Follow these instructions to ensure proper operation and prevent damage to this device

All trademarks are the property of their respective owners.

and its connected equipment.

Installation

Connect the longer HDMI cable between the HDMI Source and the

B122-000 connector marked “IN”.

Then connect the shorter HDMI cable between the HDMI Display and the B122-000 connector marked “OUT”.

Troubleshooting

Direct connect a single cable (5 meters or less is recommended)

between the source and the display to ensure thet both devices and the cable are working properly.

Confirm that the two short cables are functional by using the above step. Then use these cables to connect the B122-000 between the source and the display. If there is no video, either the long cable or the B122-000 is faulty.

To test the power supply, use a voltmeter and measure the DC output of the DC adapter to ensure that 5V is present. If output is 5V, the DC adapter is functional and the B122-000 unit has failed.

Note: The positive (+) is in the middle and the ground (-) is on the exterior of the plug.

Warranty Registration

Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You'll automatically be entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Connect the DC Power to the DC Jack of the B122-000, and then connect the DC Adapter to the wall socket.

1-Year Limited Warranty

TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. TRIPP LITE's obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not apply to equipment which has been damaged by accident, negligence or misapplication or has been altered or modified in any way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

+ 1 hidden pages