Tripp Lite B119-302-R User Manual

Owner’s Manual

WARRANTY

REGISTRATION

a chance to win a FREE Tripp Lite

product! www.tripplite.com/warranty

2 x 1 HDMI Switch

(V 1.3)

Model: B119-302-R

Package Contents 2

Overview and Product Features 2

Safety 2

Installation and Operation 2

Extended Applications 3

Troubleshooting 3

Warranty & Warranty Registration 4

Español 5

Français 9

Tripp Lite World Headquarters

1111 W. 35th Street, Chicago, , IL 60609 USA

Customer Support: +1.773.869.1234

Follow these instructions and operating procedures to ensure correct performance and to prevent damage to this unit or to its con-

www.tripplite.com

Package Contents

• B119-302-R 2 x 1 HDMI Switch (V 1.3) • 6 ft. HDMI Cable

• AC Adapter (100-240V), 5V 2.6A Output • Owner’s Manual

Overview and Product Features

The B119-302-R 2 x 1 HDMI Switch enables you to select one of two HDMI sources to be displayed on a single HDMI monitor. Key product features are:

• HDMI Version 1.3

• Signal rates up to 10.2 Gbps

• Supports up to 1080p (1920 x 1080) resolution

Safety

Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to signiﬁcantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a ﬂammable anesthetic mixture with air, oxygen or nitrous oxide.

Installation and Operation

1. Connecting the HDMI Sources

Connect each HDMI Source to an Input Port on the B119-302-R Switch using Tripp Lite P568-Series HDMI cables (Not included).

NOTE: To ensure maximum functionality, the distance between the HDMI Source and the B119-302-R Switch should not exceed 16 ft (5 m).

2. Connecting the HDMI Display

Using the included 6 ft. HDMI cable, connect the B119-302-R Switch Output Port to the HDMI Display.

NOTE: To ensure maximum functionality, the distance between the source and the B119-302-R Switch should not exceed 16 ft (5 m).

3. Connecting the AC Adapter

Connect the included AC Adapter to the B119-302-R Switch’s DC Jack and then plug it into a power source. (For protection against damaging surges and spikes, it is recommended that you plug the AC Adapter into a Tripp Lite Surge Suppressor).

4. Selecting an HDMI Source To toggle between sources connected to the B119-302-R Switch, press the Switch Button on the side of the unit.

OUTPUT

SWITCH

DC 5V

4 5 6 7

INPUT-1

HDMI Output Port

1 2

Switch Button (Allows you to choose between 2 HDMI sources)

DC Jack (DC 5V, 2.6A power input)

HDMI Input-1 Port

HDMI Input-1 Port Indicator (The LED lights when the input is chosen)

HDMI Input-2 Port Indicator (The LED lights when the input is chosen)

HDMI Input-2 Port

INPUT-2

Extended Applications

You can increase the distance from the HDMI Source to the Display beyond the maximum limit by using a Tripp Lite HDMI Extender (Model: B122-000). Simply insert the B122-000 HDMI Extender between the B119-302-R Switch and the Display, and connect using Tripp Lite P568Series HDMI cables. (For more information, see the B122-000 HDMI Extender Owner’s Manual) The diagram below shows the preferred set-up for an extended application:

Any Tripp Lite

P568-016

B119-302-R Switch

P568 Series Cable

up to 100 ft.

HDMI Extender

B122-000

P568-016

Display

Troubleshooting

If you experience problems with the Audio/Video display from the B119-302-R Switch, try the

following steps:

• Make sure you have not exceeded the maximum cable lengths (shown in these instructions). If

you’ve exceeded these lengths, use shorter cabling.

• Connect an HDMI cable directly between the source(s) and the display to verify the cable is

operating. Repeat to test all cables.

If the source(s) and the display do not work properly:

• Try using a cable that you know to be operational. If this still does not work, then the problem

lies with either the source(s) or the display.

If the source(s) and the display are operating properly:

• Test each of the ports on the B119-302-R Switch individually, using the source(s), display and

cables that you have just tested and found to work properly. Connect a functioning HDMI cable between the B119-302-R Output Port and a functioning Display. Connect a functioning source and Input Port-1 of the B119-302-R Switch using a functioning HDMI cable. Repeat this step for Input Port-2 of the B119-302-R Switch. If both ports work correctly, the B119-302-R Switch is functioning properly. If one or both ports are not working (or if none of these steps have resolved

the problems), contact Tripp Lite Technical Support at +1.773.869.1234.

Warranty & Warranty Registration

1-Year Limited Warranty

TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not apply to equipment, which has been damaged by accident, negligence or misapplication or has been altered or modiﬁed in any way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s)may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specically, TRIPP LITE is not

liable for any costs, such as lost proﬁts or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

WARRANTY REGISTRATION

Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You’ll be

automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when

customers buy new electrical and electronic equipment from Tripp Lite they are entitled to:

Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)• Send the new equipment back for recycling when this ultimately becomes waste•

Tripp Lite follows a policy of continuous improvement. Product speciﬁcations are subject to change without notice.

Made in China.

Tripp Lite World Headquarters

1111 W. 35th Street, Chicago, , IL 60609 USA

Customer Support: +1.773.869.1234

www.tripplite.com

+ 8 hidden pages