Tripp Lite B110-SP-POE User Manual
In-Line PoE Surge Protector - 1 Gbps, Cat5e/6,
Metal Case, IEC Compliant, TAA
MODEL NUMBER: B110-SP-POE
Use in your digital signage network to protect Power over Ethernet (PoE) equipment from surges, ESD
and cable discharge events.
Highlights
●
Easy to connect between PoE
source and device using
standard Cat5/5e/6 cabling
●
Rapid reaction time under 1 ns
helps prevent damage from
power surges
●
Supports 802.3af/802.3at IEEE
standards and data transmission
speeds up to 1 Gbps
●
Plug-and-play operation with no
software required for easy,
immediate installation
●
Compliant with the Federal
Trade Agreements Act (TAA) for
GSA Schedule purchases
Features
In-Line Surge Protector Keeps Your Power Over Ethernet (PoE) Equipment Safe
Ideal for home/corporate security systems, home theaters, trade shows and other digital signage
applications, the B110-SP-POE protects connected equipment from damage caused by electrostatic
discharge (ESD) and cable discharge events. Just connect it between your source and network equipment
using Cat5/5e/6 cables, such as Tripp Lite’s N001-Series snagless patch cables (sold separately). Note:
two B110-SP-POE surge protectors are required to protect both source and device.
Your Last Defense Against Intruding Voltage Spikes
Solid-state silicon-avalanche diode technology features low clamping voltage, providing superior
protection against ESD and super-fast response time under one nanosecond. Both mid-span and endspan PoE are supported. The B110-SP-POE meets the following IEC/EN regulations: IEC 61000-4-2 / IEC
61000-4-5 (ESD) 30kV (Air, Contact) and EN 61000-4-5 5kA (8/20s) / 4kV (10/700s).
Ready to Use Right from the Package, So You Can Plug and Play Immediately
This PoE in-line surge protector meets 802.3af and 802.3at IEEE standards, while supporting data
transmission speeds up to 1 Gbps. No software, drivers or external power supply is required. The
compact metal housing is designed to endure in applications where static discharge is likely to occur.
Mounting hardware is included for convenient installation where needed. Be sure the distance between
the B110-SP-POE and the equipment it is protecting is no more than 300 feet.
TAA-Compliant for GSA Schedule Purchases
The B110-SP-POE is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for
GSA (General Services Administration) Schedule and other federal procurement contracts.
Specifications
Applications
Protect a Power over Ethernet
(PoE) device’s inputs and outputs
against damage from electrostatic
discharge or power surge
Package Includes
●
B110-SP-POE In-Line 1G PoE
Surge Protector
●
Grounding wire, 1 ft.
●
(4) Mounting screws
●
(4) Screw anchors
●
Grounding wire screw
●
Quick Start Guide
OVERVIEW
UPC Code 037332217875
Product Type Surge Protector
1 / 3
Technology Cat5/5e; Cat6; PoE
INPUT
Input Cord Length (ft.) 0
Right-Angle Plug No
Input Cord Length (m) 0.00
OUTPUT
Output Receptacles Network
Right-Angle Outlets No
POWER
Power Over Cable (PoC) Support Yes
USER INTERFACE, ALERTS & CONTROLS
Diagnostic LED(s) No
SURGE / NOISE SUPPRESSION
AC Suppression Joule Rating 0
Automatic Shut-Off No
DATALINE SURGE SUPPRESSION
Telephone/DSL Protection No
Cable (Coax) Protection No
Network (Ethernet) Protection Yes
PHYSICAL
Color Black
Antimicrobial Coating No
Material of Construction Aluminium
Unit Dimensions (hwd / cm) 67 x 87 x 27
Unit Dimensions (hwd / in.) 2.63 x 3.43 x 1.06
Unit Packaging Type Box
Unit Weight (kg) 0.13
Unit Weight (lbs.) 0.28
ENVIRONMENTAL
Operating Temperature Range 14 to 167°F (10 to 75°C)
2 / 3
Loading...