Tripp lite B097-048, B097-016 User Manual

Quick Start Guide

Console Servers

Models: B097-016 (16-Port), B097-048 (48-Port)

Este manual esta disponible en español en la página de Tripp Lite: www.tripplite.com

Ce manuel est disponible en français sur le site Web de Tripp Lite : www.tripplite.com

Русскоязычная версия настоящего руководства представлена на

веб-сайте компании Tripp Lite по адресу: www.tripplite.com

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Package Includes

• B097-016 or B097-048 Console Server

• (x2) C13 to NEMA 5-15P Power Cords, 6 ft.

• (x2) Cat5e Patch Cables, 6 ft.

• (x1) B090-A9F Straight-Through Serial Adapter (DB9 to RJ45, F/F)

• (x1) B090-A9F-X Crossover Serial Adapter (DB9 to RJ45, F/F)

• (x1) B090-A9M Modular Serial Adapter (DB9 to RJ45, M/F)

• (x6) Rubber Feet

• Rack-Mounting Hardware

• Quick Start Guide

Hardware Assembly

1. If free standing: Attach the included adhesive-backed rubber feet to the console server’s base.

If rack-mounted: Attach the included rack-mount kit to the sides of the console server to be ﬁxed onto the rack.

2. Connect the NET1 port on the console server to your primary network.

3. If you plan to use the NET2 port, you may connect it now.

Note: NET2 can connect to a secondary network. For example, a secondary network may consist of a segregated management LAN or to the WAN via

your Out-of-Band (OOB) management network. Alternatively, it can connect to the same primary network as NET1 for redundancy.

4. Connect your serial devices to the console server’s serial ports labeled 1-16/48 (depending on model).

5. Power on the console server by connecting the included C13 to NEMA 5-15P power cords to the console server’s built-in dual universal

AC power supplies (with automatic failover).

Connect the Console Server

The B097-016 and B097-048 are addressable at one of the two IP addresses:

1. The built-in (default) IP address of 192.168.0.1 (subnet mask 255.255.255.0).

2. The default IP address the console server’s DHCP Client accepts from a DHCP server on your network.

Note: The console server will now respond at both 192.168.0.1 and its DHCP-supplied address.

If using a browser on the same network as the console server’s NET1 port (192.168.0.X, or the range used by your DHCP server):

3. Enter https://192.168.0.1/ or http://[DHCP-supplied address]/ and press Enter.

4. Log in using the default username and password.

Username: root

Password: default

5. Press Enter. The console server’s interface welcome page will load.

Conﬁguration and management options present themselves in expanded by-default menus along the left side of the interface.

The top-level menus are Serial & Network, Alerts & Logging, and System, Status & Manage.

The remainder of the page lists conﬁguration tasks required to turn the console server into a usable unit. Some of these tasks will be

marked as completed due to the console server’s factory settings. The procedures in the next section document initial conﬁguration using the menus, rather than the task list.

Setting a Strong, High-Entropy Password for the Root User

1. Click Serial & Network > User & Groups.

2. Click Edit for the Root User.

3. Enter a strong, high-entropy password in the Password ﬁeld.

4. Re-enter the passcode in the Conﬁrm ﬁeld.

5. Click Apply.

Set NET1 Port’s Network Conﬁguration Method

1. Click System > IP.

2. Click Network Interface (if it is not the front-most tab).

3. For the Conﬁguration Method, select either DHCP or Static.

4. If Static, enter an IP Address and Subnet Mask for the NET1 interface.

+ 2 hidden pages