Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com
Model #: B078-001-USB
KVM Switch Accessories - NetCommanderâ„¢ USB Server Interface Module
Highlights
Needed to connect a USB Server to a B072-Series NetCommander KVM
switch via Cat5e cable
Easy to install; no software needed
No power supply required
Allows a recommended maximum distance of 35ft from KVM to
computer/server via Cat5e cable
Compact and lightweight design
Description
The Tripp Lite NetCommander USB Server Interface Module connects to the HD15 port and USB port on a computer/server, and converts them to a
single RJ45 connector. Ordinary Cat5e patch cables can then be used to connect the server to the switch ports on a Tripp Lite B072-Series
NetCommander Cat5 KVM switch. Use of Cat5e cables frees up space in the installation that would ordinarily be filled by traditional, thicker KVM
cables.
System Requirements
Server or CPU with a HD15 port and a USB port
A B072-Series NetCommander Cat5 KVM Switch
Cat5e/6 cable; up to 35ft
Package Includes
1 USB Server Interface Module
Features
Eliminates the need for thicker, heavier KVM cables
Compact, lightweight design
Plug and Play; no software required
No power supply required
Allows a Server/CPU to be located up to 35ft away from the KVM switch
Specifications
OVERVIEW
Application Connects a USB computer/server to a B072-Series Cat5 KVM Switch
CONNECTIONS
Connector A
RJ45 (FEMALE)