Tripp Lite B064-000-STN Quick Start Guide
Quick Start Guide
HDMI KVM over IP
Remote User
Console Station
Model: B064-000-STN
Este guía esta disponible en español en la página de Tripp Lite:
Ce guide est disponible en français sur le site Web de Tripp Lite :
tripplite.com/support
tripplite.com/support
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR
surge protector in our monthly drawing!
tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2020 Tripp Lite. All rights reserved.
1
Product Features
• Standalone HDMI user console station provides remote access to your
B064-IPG KVM over IP switches from one centralized location.
• Enterprise-level Java-free console station replaces a PC, laptop or
notebook computer.
• With no operating system, the console station eliminates the need for
system or software updates and provides security against virus threats
and data protection.
• Monitors the video output of up to 64 servers on the primary display using
panel array mode.
• Virtual media lets you remotely connect storage media to a target server
anywhere on the network.
• HDMI port supports HD resolutions up to 1920 x 1200 @ 60 Hz.
• Included mounting plate enables wall mounting or space-saving 0U rack
mounting.
Package Contents
• B064-000-STN Console Station
• Rubber Feet (x4)
• Mounting Plate
• External Power Supply (100V-240V) with C13 to NEMA 5-15P Power
Cord
Optional Accessories
• P569-Series High Speed HDMI Cables
2
System Requirements
• Tripp Lite’s B064-IPG-Series KVM over IP Switch(es)*
• USB Mouse/Keyboard & HDMI monitor
*B064-IPG KVM over IP Switches require firmware version V1.1.102 or above to
support the B064-000-STN.
Introduction
Front Panel:
1
2 3 4 5 6 7
Reset Switch
1
USB 2.0 Peripheral Ports
2
USB Keyboard/Mouse Ports
3
Microphone and Speaker
4
Ports
Cascade Port
5
Power Button (Press once to
6
enter Standby Mode, press
again to power on the unit)
Power LED (Power ON: Blue;
7
Standby: Orange)
Rear Panel:
1 2 3 4 5
Ground Terminal
1
DC Power Supply Input
2
LAN Port
3
COM (RS-232) Port
4
HDMI Port
5
3
Mounting Instructions
The B064-000-STN can be rack mounted or wall mounted. The following
section will guide you through the proper steps.
Rack Mounting
The KVM over IP Console Station is designed to be mounted at the rear of a
rack, where it occupies 0U to save space.
1. Remove two bottom screws on the unit. Use the screws to secure the
mounting plate to the bottom of the unit as shown in Figure 1.
M3 x L5 (Countersunk Head)
Figure 1: Secure Mounting Plate to Unit
2. Screw the mounting plate to any convenient location in the rear of the
rack.
Note: These screws are user-supplied. M5 x 12 Phillips type I cross screws are
recommended.
Figure 2: Secure Unit to the Rack
4
Loading...