WARRANTY
REGISTRATION:
register online today for a chance
to win a FREE Tripp Lite product—
www.tripplite.com/warranty
1U Rackmount Console
with 19” Display
(for KVM Switch or Server)
Owner’s Manual
Model #: B021-000-19
Tripp Lite World Headquarters
1111 West 35th Street, Chicago, IL 60609 USA
(773) 869-1234, www.tripplite.com
Note: Follow these instructions and operating procedures to ensure correct performance and to prevent damage
Copyright © 2007 Tripp Lite. All rights reserved. All trademarks are the property of their respective owners.
The policy of Tripp Lite is one of continuous improvement. Specifications are subject to change without notice.
to this unit or to its connected devices.
Package Content
• B021-000-19 1U Rackmount Console
• Mounting Hardware
• USB Cable Kit with PS/2 Adapter
• AC Power Cord
• Owner’s Manual
Table of Contents
Page
Overview 2
Features .......................................................................................................................................... 2
System Requirements ........................................................................................................................ 3
Introduction ...................................................................................................................................... 3
Front View .................................................................................................................................... 3
Rear View ...................................................................................................................................... 3
Installation ......................................................................................................................................4-7
LCD OSD (On-Screen Display) Configuration ........................................................................ 5-6
Rackmounting ................................................................................................................................ 7
Specifications ...................................................................................................................................... 8
Warranty ............................................................................................................................................ 8
Warranty Registration ........................................................................................................................8
Overview
The B021-000-19 1U Rackmount Console features an integrated LCD panel, full keyboard and touch pad
in a 1U rackmountable housing. These consoles are designed for use with a server or a KVM switch with
PS/2 or USB console port connectors.
Features Include
• Rackmount console (19” LCD display, keyboard, touch pad) in an integrated 1U
rackmountable housing
• Sleep mode when the monitor cover is closed
• Supports resolutions of up to 1024 x 768 pixels
• Rackmountable in 19" system rack (1U)
• Can be used with any device that includes PS/2 or USB console port connectors
2
System Requirements
• Supports most servers and KVM switches that have PS/2 or USB console port connectors
Introduction
Front View
5
2
3
6
7
4
1
1. Hide-Away Handle: Pull to slide the module
out; push to slide the module in.
2. LCD Monitor: After sliding the module out,
2
flip up the cover to access the LCD monitor,
keyboard and touch pad.
3
3. Keyboard
4. Wrist Rests
4
5. Slide Release: Mechanism to lock the drawer
5
closed when the console is not in use.
Prevents it from accidentally sliding open.
To slide the the console out, you must first
release it by moving this tab sideways.
6
6. Rackmounting Brackets: There are
rackmounting brackets to secure the chassis
to a system rack located at each corner of the
unit. See p. 6 for rackmounting details.
7. 3-Button Touch Pad
7
8. LCD Display Controls: The LCD OSD
8
controls located here control the position and
picture settings of the LCD display. See the
LCD OSD Configuration on p. 5-6 for details.
Also includes a power LED to indicate the
status of the LCD panel.
9. Railway Release Tabs: When the drawer is
9
completely pulled out to the end, the railway
system will lock. Push these release tabs on
both sides to release the drawer so that it can
be pushed back in.
1
8
9
Rear View
4
123
1. Console Port Section: The cable kit to
1
connect the console to your server or KVM
switch plugs in here.
2
2. Power Socket: The power code plugs in here
from the AC power source.
3
3. Power Switch: On/Off rocker switch.
4
3. Auto-Detect (Internal): Automatically
detects a PS/2 or USB connection.
3