Tripp Lite B021-000-17 User Manual

WARRANTY
Owner’s Manual
REGISTRATION:
register online today for a chance
to win a FREE Tripp Lite product—
www.tripplite.com/warranty
1U Rackmount Console
(for KVM Switch or Server)
Model: B021-000-17
Package Contents
• B021-000-17 1U Rackmount Console • AC Power Cord
• KVM Cable Kit • Owner’s Manual
Overview
The B021-000-17 1U Rackmount Console features an integrated LCD monitor, full keyboard and touch pad in a 1U rackmountable housing. This console is designed for use with a server or a KVM switch with PS/2 console connectors.
Features
• Rackmount console (17-inch LCD monitor, keyboard, •Rackmountable in standard 19-inch rack (1U) touch pad) in an integrated 1U rackmountable housing •Includes rackmount brackets
• Sleep mode when the monitor cover is closed •Supports resolutions up to 1280 x 1024 pixels
System Requirements
• Supports most servers and KVM switches that have PS/2 console port connectors.
SAVE THESE INSTRUCTIONS
This manual contains important instructions that should be followed during the installation and operation of the rackmount console described in this manual. Read all instructions thoroughly before attempting to install or operate the rackmount console. Failure to comply will void the warranty and could damage the rackmount console or connected equipment.
Français
Tripp Lite World Headquarters
1111 West 35th Street, Chicago, IL 60609 USA
(773) 869-1234, www.tripplite.com
Copyright © 2008 Tripp Lite. All rights reserved. All trademarks are the property of their respective owners.
p. 5
Warning: Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.
Introduction
Front View
1. Handle: Pull to slide the module out; push to
1
slide the module in.
2. LCD Monitor: After sliding the module out,
2
flip up the cover to access the LCD monitor, keyboard and touch pad.
3. Keyboard
3
4. Slide Release: Mechanism to lock the drawer
4
when the console is not in use, preventing it from accidentally sliding open. To slide the the console out, you must first release it by moving this tab sideways.
6. Rackmounting Brackets: The brackets secure the
5
chassis to a standard 19-inch rack or rack enclosure. See the next page for rackmounting details.
7. Touch Pad
6
2
3
5
6
4
8. Console and LCD Controls: The controls located
7
here include the console power on/off button, and
5
the buttons used to control the position and picture setting of the LCD display. See “LCD OSD (On­Screen Display) Configuration,” on the next page,
1
7
for details.
Rear View
1. Console Port Section: The KVM cable kit
1
(included) to connect the console to your server or KVM switch plugs in here.
2. Power Socket: The AC power cord plugs in here.
2
2
1
Installation
Refer to the example installation diagram below as you perform the following steps:
1
1. Plug the cable kit (provided with this unit) into the console ports on the B021-000-17.
2. Plug the keyboard, monitor, and mouse connectors on the other end of the cable kit into their respective
2
ports on the server or KVM.
3. Connect the power cord to the B021-000-17’s power socket and plug the other end into a compatible AC
3
power source.
4. Power up the connected server or KVM.
4 5
5. Turn on the B021-000-17 by pressing the power on/off button (located just below the left side of the LCD monitor).
Note: The example diagram below shows the B021-000-17 connecting to a B022-016 KVM switch. If you are connecting to a different model, the console port connectors may be in a different location.
2
1
3
2
LCD OSD (On-Screen Display) Configuration
Note: Once the B021-000-17 console has been connected to a powered-on server or KVM switch and turned on, the console and LCD monitor will go into sleep mode automatically when the console cover is closed. When the unit is in sleep mode, raising the console cover will automatically restart the console and LCD monitor. To turn off the console completely, press the power on/off switch.
The LCD OSD allows you to set up and configure the 17-inch LCD monitor:
• To bring up the LCD OSD main menu, press the
MENU button.
• Use the < or > buttons to navigate through the
settings.
• After navigating to a setting choice, use the
MENU button to bring up the adjustment screen.
• When making adjustments, > increases the value;
< decreases the value.
• When you are satisfied with your adjustment,
press the AUTO button to make the change and return to the previous screen.
• When all of your adjustments have been made,
press the AUTO button toclose the LCD OSD.
Rackmounting
The B021-000-17 is designed for mounting in a 1U rack system. The various mounting options are explained in the sections that follow.
Standard 4-Post Rackmounting
The standard rackmounting brackets that come attached to the B021-000-17 allow the unit to be installed in standard 1U racks by a single individual.
Slide out the rear mounting brackets from the
1
console and mount both brackets (separate from the console) to the inside rear of a standard 1U rack system using user-supplied screws.
Take the console and gently slide it into the two
2
rear-mounted brackets in the rack and secure the console in place by inserting user-supplied screws.
NOTE: A fastening tab on each mounting bracket temporarily secures the front of the console to the rack system posts during mounting, allowing a single installer to retrieve and insert the four screws at the front of the console without assistance.
2-Post Rackmounting
The B021-000-17 can also be mounted in a 2-post rack using the optional 2-Post Rackmount Kit (model: B019-000). The mounting hardware allows for the console to be opened with the drawer in any position. The kit provides added stability and prevents the console frame from twisting. See the B019-000 manual for detailed mounting instructions.
LCD OSD Function Diagram
1
2
3
Loading...
+ 5 hidden pages