Tripp Lite B005-DPUA2-K Owner’s Manual

Owner’s Manual

2-Port DisplayPort 1.4 KVM

Switch with 4K Video, Audio

and Peripheral Sharing

Model: B005-DPUA2-K

Español 12 • Français 23 • Русский 34

WARRANTY REGISTRATION

Register your product today and be
automatically entered to win an ISOBAR®
surge protector in our monthly drawing!

tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

Copyright © 2020 Tripp Lite. All rights reserved.

1

Package Contents

• B005-DPUA2-K 2-Port DisplayPort 1.4 KVM Switch

• IR Extender

• IR Remote Control

• (2) USB 3.0 A/B Device Cables (M/M)

• External Power Supply (Input: 100–240V, 50/60 Hz, 0.5A; Output: 5V 3A)

• Owner’s Manual

Optional Accessories

• P785-DPKIT06 or P785-DPKIT10 KVM Cables

• U322-Series USB 3.0 A/B Device Cables

• P312-Series Mini Stereo Audio Cables

• P580-Series DisplayPort Cables with Latches

• P568-Series High-Speed HDMI Cables

System Requirements

Console:

• DisplayPort monitor capable of supporting the highest resolution of any
computer in the installation

• USB keyboard and mouse

• Microphone and speakers with 3.5 mm mini stereo connectors (optional)

Computer:

• DisplayPort input

• USB Type-A port

• 3.5 mm mini stereo microphone and speaker jacks (optional)

• Windows 2000/XP/Vista/Win7/Win8/Win10, Linux or Apple Mac OS
operating system

2

Product Features

• Controls 2 DisplayPort computers from a single DisplayPort video console

• Supports True 4K @ 60 Hz video resolutions, including 4:4:4 HDR and
HDCP 2.2

• DisplayPort 1.4 compliant

• Supports RGB 4:4:4/ YCbCr 4:4:4/ YCbCr 4:2:2/ YCbCr 4:2:0

• DisplayPort outputs support 16 bits per channel (48-bit all channels)
Deep Color and 8.1 Gbps per channel (32.4 Gbps all channels)
bandwidth

• HDMI output supports 12 bits per channel (36-bit all channels) Deep
Color and 6 Gbps per channel (18 Gbps all channels) bandwidth

• Built-in 2-port USB 2.0 hub allows USB devices to be shared between
computers connected to the KVM switch

• 3.5mm mini stereo jacks allow a microphone to provide audio input to
each connected computer and let you listen to audio output on a set of
speakers

• Additional console audio jacks are conveniently located on the front
panel, making them ideal for use with speakers and microphones

• Switch between connected computers via front-panel pushbuttons, IR
remote, mouse movement or keyboard hotkeys

• Supports hot-plugging – computers and devices can be unplugged and
re-plugged without having to shut down the KVM switch

• Quick installation without the need for software

• Stores the monitor’s EDID (Extended Display Identification Data) to
optimize display resolution

3

Panel Descriptions

Front Panel

1 2 4 5 6 73 8

1

Power – Press to turn the unit on and off.

2

Power Indicator – Illuminates red to signal the DC power supply is

connected to an outlet and the KVM switch is turned on.

3

Input Selector – Illuminates blue to indicate whether PC1 or PC2 has

been selected. Select LEDs flash in a loop during automatic switching
mode. Online LEDs illuminate when the corresponding USB-B port is
connected.

4

IR EXT – Connect the included IR Extender for IR signal reception from

the included IR Remote Control.

5

IR – Signal reception point for the IR Remote Control.

6

3.5 mm Microphone – Connect a microphone.

7

3.5 mm Stereo – Connect a stereo audio device.

8

USB-A 3.0 – Connect USB peripherals (printers, scanners, U-disks,

etc.)

4

Panel Descriptions

Rear Panel

9 10 11 12

9

Outputs

a. Connect a mouse and keyboard to the USB 2.0 ports.

b. Connect an amplifier to the 3.5 mm stereo port.

c. Connect a microphone to the 3.5 mm microphone port.

d. Connect a local HDMI monitor to the HDMI Out port.

e. Connect a local DisplayPort monitor to the DisplayPort Out port.

10

PC1 Input – Connect to a computer’s DisplayPort, USB, stereo audio

and microphone ports.

11

PC2 Input – Connect to a second computer’s DisplayPort, USB, stereo

audio and microphone ports.

12

DC 5V Input – Connect the included 5V/3A DC power supply.

5

Installation and Operation

Refer to the following steps and diagram to set up your KVM switch
installation.

Note: Before making any connections, make sure power to all devices connected
to the KVM switch is turned off. Unplug the power cords of any computers that have
the Keyboard Power On function.

Amplifier

PC1 PC2

USB Devices

(Printer, Scanner, U-disk, etc)

Power Supply

DisplayPort

Display

Keyboard

HDMI Display

Mic

IR Extender

Mouse

Mic

Amplifier

1. Connect computers to the USB-B input ports using USB cables. Connect

the computers’ microphone and stereo audio ports using 3.5 mm
audio cables. Connect computers to the “DisplayPort In” ports using
DisplayPort cables.

2. Connect a keyboard and mouse to the USB-A ports on the rear panel.

Connect a microphone and amplifier to the microphone and stereo audio
ports using 3.5 mm audio cables. Connect a monitor to “DisplayPort
Out” using a DisplayPort cable (maximum: 2 m) or to “HDMI Out” using
an HDMI cable.

Note: When either “DisplayPort Out” or “HDMI Out” is connected, video

is transmitted by the connected port automatically. When both ports are
connected, the DisplayPort takes precedence.

6

Installation and Operation

3. Connect the included DC power supply, and press the Power button. The

Power LED will illuminate. When computers are connected to the PC1
and PC2 ports, the Online LEDs will illuminate.

4. Press the buttons on the front panel to select the desired computer.

The Select LED will illuminate to indicate which computer is currently
selected. The monitor will show the corresponding image, and the
selected computer can by controlled via keyboard and mouse.

5. The included IR Remote Control works the same as the pushbuttons:

a. For input: “1” specifies PC1 and “2” specifies PC2.

b. For loop switching: Order is PC1>PC2>PC1>…

6. USB peripherals, such as printers, scanners and thumb drives, can be

connected to the front-panel USB-A ports.

7

Special Function Operation

1. Mouse Traversal Function – Place the mouse on the far right of the

monitor, and continue to slide it to the right for 2 seconds. The KVM
switch will automatically switch to the next port. Switching order is
PC1>PC2>PC1>…

2. USB-B Detection Switching Function:

a. When the unit detects that a computer is connected to the USB-B

port, the unit immediately switches to that computer, and the
corresponding Online and Select LEDs illuminate. For instance, if PC1
is already connected, then PC2 becomes connected via USB-B, and
the KVM will automatically switch to PC2.

b. When the currently selected computer is powered off or the USB

cable is dialed out, the KVM automatically switches to the next
computer with the power on and the USB port connected.

3. Hotkey Function:

Number Hotkey Combination Function Description

1

[Scroll Lock]++¹ [Scroll Lock] +
→ or ↓

2

[Scroll Lock]++ [Scroll Lock] +
← or ↑

3

[Scroll Lock]++ [Scroll Lock] + [X]²

4

[Scroll Lock]++ [Scroll Lock] + [S]³

5

[Scroll Lock]++ [Scroll Lock] +
[I] + [N]4 + [Enter]

6

[Scroll Lock]++
[Scroll Lock] + [B] + [1/0]5

7

[Scroll Lock]++ [Scroll Lock] +
[F] + [L] + [A] + [S] + [H] + [Enter]

Switch to the next port

Switch to the previous port

Switch to PC "X"
Enable Automatic Switching

(Default: 15 seconds)
Set the Automatic Switching

Interval (Between 5 ~ 999
Seconds)

Buzzer On/Off (Default: On)

All resume hotkey default

6

mode

Notes:

1) Hotkeys are not case-sensitive.

2) A noise sounds when switching between PC1 and PC2.

¹ “++” means to press [Scroll Lock] twice in rapid succession. For example:

[Scroll Lock] ++ [Scroll Lock] + [1]” means to press the Scroll Lock
button twice in rapid succession and then press the number 1 button. The
detection period between each hotkey code is 5 seconds. If the Scroll Lock
button is pressed the first time and 5 seconds pass before the Scroll Lock
button is pressed again, the hotkey code will be invalid.

² “X” indicates the PC input. For example, to switch to PC2, the hotkey

combination is [Scroll Lock] ++ [Scroll Lock] + [2].

8

Special Function Operation

³ Turning on this function will cause DisplayPort, microphone and speaker

ports to enter automatic switching mode without USB. Press any key (except
Spacebar) to exit to the port used prior to the automatic switching sequence.
Press Spacebar to stay at the port currently in use. When automatic switching
mode is enabled, the corresponding “Select” LED of the port currently in use
will flash.

4

“N” indicates the number of switching interval, which can be 5 seconds to

999 seconds.

5

“1” means On, “0” means Off.

6

This mode only has relation to hotkey function #4 and #6.

9

Specifications

Connectors

KVM Connectors (Female) USB 3.0-B x2 (Rear)

DisplayPort x2 (Rear)

3.5 mm Stereo x2 (Green, Rear)

3.5 mm Stereo x2 (Pink, Rear)

Console Connectors (Female) USB 2.0-A x2 (Rear)

DisplayPort x1 (Rear)
HDMI x1 (Rear)

3.5mm Stereo x2 (Green, 1 Front, 1 Rear)

3.5mm Stereo x2 (Pink, 1 Front, 1 Rear)

USB Hub Connectors (Female) USB 3.0-A x2 (Front)

Video Resolution

Maximum Resolution 4K x 2K @ 60 Hz (4K UHD)

Operating Bandwidth

HDMI Bandwidth 18 Gb
DisplayPort Bandwidth 32.4 Gb

Environmental

Operating Temperature Range 32° ~ 113°F (0° ~ 45°C)
Operating Humidity Range 10% ~ 85% RH (No Condensation)
Storage Temperature Range 14° ~ 176°F (-10° ~ 80°C)
Storage Humidity Range 5% ~ 90% RH (No Condensation)

Power Requirement

External Power Supply DC 5V/3A
Power Consumption (Max) 12W

ESD Protection

Human Body Model +/- 8kV (Air Gap Discharge)

+/- 4kV (Contact Discharge)

10

Warranty and Product Registration

3-Year Limited Warranty

Seller warrants this product, if used in accordance with all applicable instructions, to be free
from original defects in material and workmanship for a period of 3 years from the date of
initial purchase. If the product should prove defective in material or workmanship within that
period, Seller will repair or replace the product, at its sole discretion.

THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM
ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES
OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT
PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES
OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD
SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND
CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied
warranty lasts, and some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may not apply to you. This
warranty gives you specific legal rights, and you may have other rights which vary from
jurisdiction to jurisdiction).

WARNING: The individual user should take care to determine prior to use whether this device
is suitable, adequate or safe for the use intended. Since individual applications are subject to
great variation, the manufacturer makes no representation or warranty as to the suitability or
fitness of these devices for any specific application.

Product Registration

Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically
entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for
details.

Tripp Lite has a policy of continuous improvement. Specifications are subject to change without
notice. Photos and illustrations may differ slightly from actual products.

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

11

20-04-029 • 93-3C24_RevA

Manual del Propietario

KVM DisplayPort 1.4 de

2 Puertos con Video 4K,

Audio y Compartido de

Periféricos

Modelo: B005-DPUA2-K

English 1 • Français 23 • Русский 34

1111 W. 35th Street, Chicago, IL 60609, EE UU • tripplite.com/support

Copyright © 2020 Tripp Lite. Todos los derechos reservados.

12

Contenido del Empaque

• B005-DPUA2-K – KVM DisplayPort 1.4 de 2 Puertos

• Extensor IR

• Control Remoto IR

• (2) Cables para dispositivos USB 3.0 A/B (M/M)

• Fuente de Alimentación Externa (Entrada: 100V ~ 240V, 50Hz / 60Hz,

0.5A; Salida: 5V 3A)

• Manual del Propietario

Accesorios Opcionales

• Cables KVM P785-DPKIT06 o P785-DPKIT10

• Cables para Dispositivo USB 3.0 A/B Serie U322

• Cables de Audio Mini Estéreo Serie P312

• Cables de seguridad DisplayPort de la Serie P580

• Cables HDMI de Alta Velocidad Serie P568

Requisitos del Sistema

Consola:

• Monitor DisplayPort con capacidad para soportar la mayor resolución de
cualquier computadora en la instalación

• Teclado y mouse USB

• Micrófono y bocinas con conectores mini estéreo de 3.5 mm (opcionales)

Computadora:

• Entrada DisplayPort

• Puerto USB Tipo A

• Enchufes mini estéreo de 3.5 mm para micrófono y bocinas (opcional)

• Sistema operativo Windows 2000 / XP / Vista / Win7 / Win8 / Win10,
Linux o Apple Mac OS

13

Características del Producto

• Controla 2 computadoras DisplayPort desde una sola consola de video
DisplayPort

• Soporta resoluciones de video 100% 4K @ 60 Hz, incluyendo HDR 4:4:4
y HDCP 2.2

• Cumple con DisplayPort 1.4

• Soporta RGB 4:4:4/ YCbCr 4:4:4/ YCbCr 4:2:2/ YCbCr 4:2:0

• Las salidas DisplayPort soportan un ancho de banda de 16 bits por canal
(48 bits todos los canales) Color Verdadero y 8.1 Gbps por canal (32.4
Gbps todos los canales)

• La salida HDMI soporta un ancho de banda de 12 bits por canal (36 bits
todos los canales) Color verdadero y 6 Gbps por canal (18 Gbps todos los
canales)

• Un hub incorporado de 2 puertos USB 2.0 permite compartir dispositivos
USB entre las computadoras conectadas al KVM

• Los enchufes mini estéreo de 3.5 mm permiten a un micrófono
proporcionar una entrada de audio a cada una de las computadoras
conectadas y le permiten escuchar la salida de audio en un juego de
bocinas

• Los enchufes adicionales de audio de la consola están colocados
convenientemente en el panel frontal, haciéndolos ideales para su uso
con bocinas y micrófonos

• Alterne entre computadoras conectadas mediante los botones en el
panel frontal, control remoto IR, movimiento de mouse o teclas rápidas

• Soporta conexión directa – Las computadoras y los dispositivos pueden
desconectarse y reconectarse sin tener que apagar el KVM

• Rápida instalación sin la necesidad de software

• Guarda el EDID [Extended Display Identification Data] del monitor para
optimizar la resolución de la pantalla

14