Tripp Lite 2342M User Manual
PACKAGE CONTENTS
DWM 2342M
INSTALLATION GUIDE
Max load capacity:50KG/110lbs
Screw size range:23"-42"
Adjustable angle: ±10°
IMPORTANT:If necessary, please consult a professional installer
if these instructions do not apply to your mounting
application.
NO.
SC30764
C31357A
C31620-300
C31213-300
SC30764-100
SC10840
SC10825
SC10630
A106-100
SC11815-200
SC13015-200
SC11515-200
703103M-24
703103M-25
73103M-26
Apperance
Qty
4
4
4
4
1
4
4
4
2
4
8
4
1
2
1
Description
7MM lag bolt Ø7X64mm
concrete anchor
plastic spacer
plastic spacer
Install sleeve
machine screw
machine screw
machine screw
Allen Key 6mm
washer
washer
washer Ø15X1.5mm 5mm
plate
left/light TV rail 428x70x65mm T:2mm
wall plate
Ø13X57mm
Ø16X20mm
Ø12X13mm
Ø8X40mm
Ø8X25mm
Ø6X30mm
Ø18X1.5mm 6mm
Ø20X1.5mm 8mm
548x195x25mm T:2mm
S
V
R
Size
4
4
4
1、Using a level, place the wall plate against the wall
and mark the position of the holes to be drilled.
2、Drill 2.75"(70mm) deep holes with a ∅12 bit.(If you
installthe wall plate in a wooden wall,Use a ∅6 bit.)
2.75"(70mm)
Ø12(15/32)
concrete wall
2.75"(70mm)
Ø6(15/64)
wood wall
3、Mount the wall plate using the hardware as
shown below.
concrete wall
SC13015-200
C31357A
73103M-26
SC30764
SC30764-100
wood wall
SC13015-200
73103M-26
SC30764
SC30764-100
4、Using the correct length hardware, mount the
rails to the TV or LCD panel. Determine the
amount of tilt you need before tightening.
SC10840
SC10825
SC10630
5、Mount the plate to the arm assembly. Level the plate
and tighten the mounting hardware.
73103M-26
S
SC11815-200
SC13015-200
SC11515-200
10.0°
703103M-25
C31620-300
C31213-300
PLASMA
10.0°
R
703103M-24
V
6、Put the TV or LCD panel onto the plate using the
hooks. Once positioned, tighten the lower screws
shown to lock the rails into place.
703103M-24
703103M-25
703103M-25-1
！ WARNING:
1、It is not recommended to use this mount
on hollow walls. Always mount to concrete,
brick or wall studs.
2、Do not over tighten the mounting hardware.
3、Completely remove the the TV or LCD panel
before loosening any of the mounting screws.
4、For added security, always use the included
Allen wrench to tighten the hardware by hand.
100
90
±
220
-2
703103M-25
MAX=500 MIN=50
548
The viewing angle can be adjusted
by loosen or tighten 703103M-25 -2.
°
°
10
±
428
Loading...