2
Line Conditioner Location Warnings
• Install your line conditioner indoors, away from excess moisture and heat, direct sunlight,
and dust and other conductive contaminants.
• For best performance, keep the indoor temperature between 0° C and 40° C (between
32° F and 104° F).
• Leave adequate space around all sides of the line conditioner for proper ventilation.
Line Conditioner Connection Warnings
• Connect your line conditioner directly to a properly grounded AC power outlet. Do not
use adapters that would eliminate the line conditioner’s connection to ground.
• Do not use extension cords between the line conditioner and the AC outlet. If necessary, a
Tripp Lite surge suppressor may be used between the line conditioner and the AC outlet.
• If you are connecting your line conditioner to a motor-powered AC generator, the generator
must provide clean, filtered computer-grade output. Connecting your line conditioner to a
generator will void its Ultimate Lifetime Insurance.
Equipment Connection Warning
• Do not use Tripp Lite line conditioners for life support applications in which a
malfunction or failure of a Tripp Lite line conditioner could cause failure or
significantly alter the performance of a life-support device.
Line Conditioner Maintenance Warning
• Tripp Lite line conditioners require no maintenance. Keep the line conditioner dry at all
times. DO NOT open the unit for any reason.
Important Safety Instructions
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be followed during the
installation, operation and storage of all Tripp Lite line conditioners. Failure to heed these
warnings will void your warranty.