Trimble Inc.
935 Stewart Drive
Sunnyvale , CA 94085
www.trimble.com
USA
Global tec hnical support
To request detailed technical assistance for Trimble solutions,
contact: trimble_support@trimble.com
Recycl ing infor m ation
You should dispose of the device and accessories properly according
to local laws and regulations. Because the device
electronic components, it must be disposed of
household waste. When the device reaches
local Trimble reseller to learn about
your area.
trademarks of Trimble Inc., registered in the United States
in other countries. Access is a trademark of Trimble Inc.
The Bluetooth word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by Trimble Inc.
under license.
All other trademarks are the property of their respective
owners.
Release Notice
This is the June 2018 release (Revision A) of the Trimble
5 handheld documentation.
and
is
Nomad
The symbol at right means that according to local laws and
regulations your product and/or its battery
separately from household
of life, take it to a
separate
the time of disposal will help conserve natural resources and ensure
that it is recycled in a manner that protects human
environment.
For information about recycling Trimble WEEE (Waste
Electronic Equipment) products that run on
To recycle Trimble WEEE products call +31 497 53 24 30, and ask for the
"WEEE Associate". or mail a request for recycling
Trimble Europe B.V. WEEE Recycling
Gate 19 to 26
Meerheide 43
5521 DZ
collection point designated by local authorities. The
collection and recycling of your product and/or its battery at
waste. When this product reaches its end
shall be disposed of
health and the
Electrical and
electrical power go t o
instructions to:
C/O Menlo logistics
Eersel
The Netherlan ds
Taiwan – Battery Recycling Requirements
The prod u ct c o ntai n s a Li thium-io n b at ter y.
regulations require that waste batteries
廢電池請回收
are recy cled.
Taiwanese
China Recycling Requirements
[Insert China Hazardous Substances declaration table]
Trimble Nomad 5 Handheld User Guide | 3
Regional compliance
Australia and New Zealand
This product conforms with the regulatory
requirements of the Australian Communications and Media
Authority (ACMA) Telecommunications, Radio
communications and EMC Labelling Notices, thus satisfying
the requirements for RCM marking and sale within Australia
and New Zealand.
Europe
European declaration of conformity
According to ISO / IEC Guide 22 and EN 450 14
Manufacturer’s Name: Trimble Inc..
Manufacturer’s Address: 935 Stewart Drive, Sunnyvale CA
94085, USA
Declares, under our sole responsibility, that the product:
Product Name: Nomad 5
Model Number: 121500
Conforms to the following Product Specifications:
- RED 2014/53/EU LVD 2014/35/EU EMC 2014/53/EU RED
- ETSI EN 300 328
- ETSI EN 300 893
- ETSI EN 303 413
- ETSI EN 301 489-1
- ETSI EN 301 489-3
- ETSI EN 301 489-17
- EN 55032: 2012+AC: 2013
- EN 55024: 2010+A1:2015
- EN 60950-1:2006/A11:2009/A1:2010/
- EN 62368-1:2014
Supplementary information
In addition, the product is battery powered and the power
supply provided with this product has been certified to IEC
60950: 2005 2nd editi on +Am1:2009+Am2: 2013/ IE C 62368-1:
2014. As manufacturer, we declare under our sole
responsibility that the equipment follows the
Standards stated above.
Importer of Record
provisions of the
Trimble European Regional Fulfillment Center
Meerheide 45
Trimble EC
65479 Raunheim
Germany
55521DZ Eersel
Trimble Germany Am Princ Parc 11
Netherlands.
CAUTION - Only approved accessories may be used with this
equipment. In ge n eral, al l cabl es must be high qual ity,
correctly terminated and normally restricted to two
Power supplies approved for this product emplo y special provisions to
avoid radio interference and
Unapproved
these instructions for use may void authorization by the authorities
operate the equipment.
This Trimble product has been tested and found to comply with all
requirements for CE Marking and sale within the European Economic
Area (EEA). The device has Bluetooth and wireless LAN approval and
satisfies the requirements for Radio and Telecommunication Terminal
Equipment specified by European Council Directive 2014/53/EU. These
requirements provide reasonable protection against harmful
interference when the equipment is operated appropriately in a
residential or commercial environment.
The device is intended for connection to European Networks
Caution:
Risk of explosion if battery replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Make sure the temperature for adapter will not be higher than
40 ˚C.
Canada
Contains IC ID: 5817A-EM7455/ 5817A-QCNFA324
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatu s as set out in the radio
interference regulations of the Canadian Department of
Communications.
Le présent appareil numérique n'émet pas de bruits
radioélectrique s dépassant le s limites applicab le s aux appareils
numériques de Classe B prescrites dans le règlement sur le
brouillage radioélectrique édicté par le Ministère des
Communications du Canada.
Changes and modifications not expressly approved by the
manufacturer or registrant of this equipmen t can void your
authority to operate this equipment under Industry Canada rules.
Les changements et modifications non expressément approuvés
par le fabricant ou le détenteur de cet
modifications or operations beyond or in conflict with
should not be altered or substituted.
Logistics Manager
shielded,
meters in length.
to
Trimble Nomad 5 Handheld User Guide | 4
équipement peuvent annuler votre droit à utiliser cet
appareil en vertu des règles d'Industrie Canada.
Antenna Statement
Under Industry Canada regulations, this radio transmitter
may only operate using an antenna of a type and maximum
(or lesser) gain approved for the transmitter by Industry
Canada. To reduce potential radio interference to other
users, the antenna type and its gain should be so chosen
that the equivalent isotropically radiated power (e.i.r.p.) is
not more than that necessary for successful
communication.
SAR is measured with the device at 0 mm to the extremity, while
transmitting at the highest certified output power level in all
frequency bands of the device.
The maximum SAR value is 0.58 (WLAN) / 3.34 (WWAN) W/kg
(extremity) averaged over 10 gram of tissue.
This equipment should be installed and operated with a minimum
distance of 0 cm between the radiator and your extremity. This
device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter. The County
Code Selection feature is disabled for products marketed in the
US/Canada.
Conformément à la réglementation d'Industrie Canada, le
présent émetteur radio peut fonctionner avec une antenne
d'un type et d'un gain maximal (ou inférieur) approuvé pour
l'émetteur par Industrie Canada. Dans le but de réduire les
risques de brouillage radioélectrique à l'intention des
autres utilisateurs, il faut choisir le type d'antenne et son
gain de sorte que la puissance isotrope rayonnée
équivalente (p.i.r.e. ) ne dépasse pas l'intens ité néces saire
à l' établ i ssement d'une communication satisfaisante.
Licence exempt
This device complies with Industry Canada licence-
exempt RSS standard(s). Operation is subject to the
following two conditions:
1.
this device may not cause interference, and
2.
this device must accept any interference, including
interference that may cause undesired operation of
the device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes :
1.
l'appareil ne doit pas produire de brouillage, et
2.
l'utilisateur de l'appareil doit accepter tout brouil lage
radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian
ICES- 003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
This Category II radio communication device complies
with Industry Canada Standard RSS-310.
Ce dispositif de radiocommunication de catégorie II
respecte la norme CNR-310 d’Industrie Canada.
IC S AR wa rning
Radio Frequency (RF) Exposure Informat ion
The radiated output power of the Wireless Device is below the
Industry Canada (IC) radio frequency exposure limits. The Wireless
Device should be used in such a manner such that the potential
for human contact during normal operation is minimized.
This device has been evaluated for and shown compliant with the
IC Specific Absorption Rate (“SAR”) limits whe n installed in
specific host products operated in portable exposure conditions.
Informations concernan t l'expos it ion aux fréquences radio (RF)
La puissance de sortie émise par l’appareil de sans fil est
inférieure à la limite d'exposition aux fréquences radio d'Industry
Canada (IC). Utilisez l’appare il de sans fil de façon à minimiser les
contacts humains lors du fonctionnement normal.
Ce périphérique a été évalué et démontré conforme aux limites
SAR (Specific Absorption Rate – Ta ux d'absor ption sp écifique) d'IC
lorsqu'il est installé dans des produits hôtes particuliers qui
fonctionnent dans des conditions d'exposition à des appareils
portables.
The device could automatically discontinue transmission in case
of absen ce of i nformation to t ransmit, or operational failure. Note
that this is not intended to prohibit transmission of control or
signaling information or the use of repetitive codes where required
by the technology.
The device for the band 5150-5250 MHz is only for indoor usage to
reduce potential for harmful inter ference to co- channel mobile
satellite systems; the maximum antenna gain permitted (for
devices in the bands 5250-5350 MHz and 5470-5725 MHz) to
comply with the e.i.r.p. limit; and The maximum antenna gain
permitted (for devices in the band 5725-5850 MHz) to comply with
the e .i.r.p. limits spec ified for poin t -to-point and non-point-to-point
operation as appropriate, as stated in section A9.2(3). In addition,
High- power radars are allocated as primary users (meaning they
hav e priority) of the band 5250-5350 MHz and this radar could
cause interference and/or damage to LE-LAN devices.
IMPORTANT NOTE: IC Radiation Exposure Statement
This EUT is compliant with SAR for general
population/uncontrolled exposure limits in IC RSS-102 and
had been tested in accordance with the measurement
methods and procedures specified in IEEE 1528.
This equipment has been tested and found to comply
with the limits for a Cl a s s B digi tal de vice p ur sua n t t o
Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept
any interference received, including interference that
may cause undesired operation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions may cause harmful
interference to radio communication. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
–
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
–
and the receiver.
Connect the equipment into an outlet on a circuit
–
different from that to which the receiver is
connected.
–
Consult the dealer or an experienced radio/TV
tec h nici a n for help.
Changes and modifications not expressly approved by
the manufacturer or registrant of this equipment can
void your authority to operate this equipment under
Federal Communications Commission rules.
The radios in this device have been designed and
manufactured to not exceed stipulated emission limits
for exposure to radio frequency (RF) energy as required
by the Federal Communications Commission of the U.S.
Gov e rnmen t 4 7 C.F.R . § 2.10 9 1 and 2.1093.
Operation on the 5.15-5.25GHz frequency band is
restricted to indoor use only. The FCC requires indoor
use f or t h e 5.15- 5.25GHz band to reduce the potential
for h armf ul interferenc e to c o-channel Mobile Satellite
Systems.
Therefore, it will only transmit on the 5.25-5.3 5 G Hz ,
5.47- 5.725 GHz and 5.725 –5.850 GHz band when
ass ociated wi t h an acc e s s p oint (AP).
FCC Radiation Exposure Statement
SAR is measured with the device at 0 mm to the extremity,
while transmitting at the highest certified output power
level in all frequency bands of the device.
The maximum SAR value is 0.58 (WLAN) / 3.34 (WWAN)
W/kg (extremity) averaged over 10 gram of tissue.
extremity. Thi s device and its antenna (s) must not be co-located
or operating in conjunction with any other antenna or transmitter.
The County Code Selection feature is disabled for products
marketed in the US/Canada.
Limited Warranty Terms and Conditions
Product Li mite d Wa rra nty
Subject to the terms and conditions set forth herein, Trimble Inc.
(“Trimble”) warrants that for a period of two (2) years from
purchase this Trimble product (the “Product”) will substantially
conform to Trimble's publicly available
Product and that the hardware and any
of the Product will be
workmanship.
substantially free from defects in materials and
specifications for the
storage media components
date of
Accessing Labels
You can find E-label at below location
Settings->System->About tablet->Regulatory information
This equipment should be installed and operated wi th a
minimum distance of 0 cm between the radiator and your
Trimble Nomad 5 Handheld User Guide | 6
Product Software
Product software, whether built into hardware circuitry as
firmware, provided as a standalone computer software
product, embedded in flash memory, or stored on magnetic or
other media, is licensed solely for use with or as an integ ral part
of the Product and is not sold. The terms of the end user
license agreement, as included below, govern the use of the
Product Software, including any differing limited warranty
terms, exclusions and limitations, which shall control over the
terms and conditions set forth in the limited Product
warranty.
Warranty Remedies
If the Trimble Product fails during the warranty period for
reasons covered by this limited warranty and you notify
Trimble of such failure during the warranty period, Trimble will
repair OR replace the nonconforming Product with new,
equivalent to new, or reconditioned parts or Product, OR
refund the Product purchase price paid by you, at Trimble’s
option, upon your return of the Product in accordance with
Trimble's product return procedures then in effect.
How to O bta in War ra nt y Servic e
To obtain warranty service for the Product, it is
recommended you contact your Trimble dealer. Alternatively,
you may contact Trimble to request warranty service by
emailing Repair_Services@Trimble.com. Please be prepared
to provide:
–
–
–
–
The customer service representative may need additional
information from you depending on the nature of the
problem.
your name, address, and telephone numbers;
product name, part number and serial number;
proof of purchase;
an explanation of the problem.
Warranty Exclusions and Disclaimer
This Product limited warranty shall only apply in the event and
to the extent that (i) the Product is properly and correctly
installed, configured, interfaced, maintained, stored, and
operated in accordance with Trimble's applicable operator's
manual and specifications, and; (ii) the Product is not modified
or misused. This Product limited warranty shall not apply to,
and Trimble shall not be responsible for, defects or
performance problems resulting from (i) the combination or
utilization of the Product with hardware or software products,
information, data, systems, interfaces, or devices not made,
supplied, or specified by Trimble; (ii) the operation of the
Product under any specification other than, or in addition to,
Trimble's standard specifications for its products; (iii) the
unauthorized installation, modification, or use of the Product;
(iv) damage caused by: accident, lightning or other electrical
discharge, fresh or salt water immersion or spray (outside of
Product specifications ); or exposure to environmental conditions for
which the Product is not intended; (v) normal wear and tear on
consumable parts (e.g., batteries); or (vi) cosmetic damage. Trimble
does not warrant or guarantee
of the Product or
free.
error
NOTICE REGARDING PRODUCTS EQUIPPED WITH
TECHNOLOGY CAPABLE OF TR ACKING SATELLITE SIGNALS FROM
SATELLITE BA SED AUGMENTATION SYSTEMS (SBAS)
EGN OS , GAGA N, MSAS AND LUCH), OMNISTAR,
GALILEO OR GLONASS SATELLITES, OR FROM IALA BEACON
SOURCES: TRIMBLE IS NOT RESPONSIBLE FOR
OR FAILURE OF OPERATION OF ANY SATELLITE BASED
POSITIONING SYSTEM OR THE
SATELLITE BASED POSITIONING
THE FOREGOING LIMITED WARRANTY TERMS STATE TRIMBLE’S
ENTIRE LI A BILITY, AND YOUR E XCLU S IVE
TO THE TRIMBLE PRODUCT. EXCEPT
PROVIDED HEREIN, THE PRODUCT, AND ACCOMPANYING
DOCUMENTATION AND
WITHOUT EXPRESS OR IMPLIED WARRANTY OF ANY KIND, BY EITHER
TRIMBLE
PRODUCTION, INSTALLATION, OR DIST RIBUT IO N, INC LUD I N G,
BUT NO T LIMI T E D TO, THE IMPLIED
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
TITLE, AND NONINFRINGEMENT.
WARRANTIES ARE IN LIEU OF ALL OBLIGATIONS OR LIABILITIES ON
THE PART OF TRIMBLE
WITH, ANY
DO NOT ALLOW LIMITATIONS ON DURATION OR THE EXCLUSION
OF AN IMPLIED WARRANTY, THE ABOVE LIMI TAT IO N MAY NOT
APPLY TO YOU.
Software, or that software components will operate
OR ANYONE WHO HAS BEEN INVOLVED IN ITS CREATION,
PRODUCT. BECAUSE SOME STATES AND JURISDICTIONS
the results obtained through the use
(WAAS,
BEIDOU, GPS,
THE OPERATION
AVAILABILITY OF ANY
SIGNALS.
AS OTHERWISE EXPRESSLY
MATERIALS ARE PROVIDED “AS-IS” AND
THE STATED EXPRESS
ARISING OUT OF, OR IN CONNECTION
REMEDIES, RELATING
WARRANTIES OF
Limita tion of L iability
TRIMBL E' S ENTIRE LI A BILITY UNDER ANY PROVISION HEREIN
SHALL BE LIMITED TO THE AMOUNT PAID BY YOU
TO THE MAXIMUM EXTENT PERMITTED
EVENT SHALL TRIMBLE OR ITS
INDIRECT, SPECIAL,
WHATSOEVER UNDER ANY CIRCUMSTANCE OR LEGAL THEORY
RELATING
ACCOMPANYING DOCUMENTATION AND MATERIALS,
(INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS
BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF DATA, OR
ANY OTHER PECUN IARY LOSS), REGA RDLESS OF
TRIMB L E HA S BEE N AD V IS ED OF THE
LOSS AND REGARDLESS OF THE
DEVE LOP S OR H AS
BECAUSE SOME
IN ANYWAY T O THE PRODUCTS, SOFTWARE AND
INCIDENTAL, OR CONSEQUENTIAL DAMAGE
DEVELOPED BETWEEN YOU AND TRIMBLE.
BY APPLICABLE LAW, IN NO
SUPPLIERS BE LIABLE FOR ANY
POSSIBILITY OF ANY SUCH
COUR SE O F DEA L I N G WHICH
FOR THE PRODUCT.
OF
WHETHER
Trimble Nomad 5 Handheld User Guide | 7
STATES AND JURISDICTIONS DO NOT ALLOW TH
E
EXCLUSION OR LIMITA T I ON OF LIABILI TY FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE
LIMITATI ON MAY N OT A P PLY TO Y O U.
NOTE: THE ABO VE TRI MB LE LIMI TED WARRA NTY
PROVISIONS WILL NOT APPLY TO PRODUCTS PURCHASED IN
THOSE JURISDICTIONS (E.G., MEMBER STATES OF TH
E
EUROPEAN ECONOMIC AREA) IN WHICH PRODUCT
WARRANTIES ARE THE RESPONSIBILITY OF THE LOCAL
DEALER FROM WHOM THE PRODUCTS ARE ACQUIRED. IN
SUCH A CASE, PLEASE CONTACT YOUR TRIMBLE DEALER
FOR APPLICABLE WARRANTY INFORMATION.
Notice to Australian Purchasers - The Australian
Consu mer Law
Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Trimble's warranty, as set out in the user manual
accompanying this statement, or as described in the
warranty card accompanying the Product you purchased, is in
addition to any mandatory rights and remedies that you may
have under the Australian Consumer Law.
Official Language
THE OFFICIAL LANGUAGE OF THESE TERMS AND
CONDITIONS IS ENGLISH. IN THE EVENT OF A CONF LICT
BETWEEN ENGLISH A ND OTHER LANGUAGE VERSIONS,
ENGLISH LANGUAGE SHALL CONTROL
THE
End User License Agreement for Product
Software
IMPORTANT, READ CAREFULLY. THIS END USER LICENSE
AGREEMENT (“EULA”) IS A LEGAL AGREEMENT BETWEEN
YOU AND Trimble Inc. (“Trimble”) and applies to the computer
software provided with the Trimble product purchased by you
(whether built into hardware circuitry as firmware, embedded
in flash memory, or stored on magnetic or other media), or
provided as a stand-alone computer software product, and
includes any accompanying written materials such as a user's
guide or product manual, as well as any "online" or electronic
documentation ("Software" or “Product Software”). This EULA
will also apply to any Software error corrections, updates and
upgrades subsequently furnished by Trimble, unless such are
accompanied by different license terms and conditions, which
will govern their use. You have acquired a Trimble Product
("Device") that includes Software, some of which was licensed
by Trimble from Microsoft Corp o ration or its af filiate s
(colle ct i vely " M icrosoft"). T h e S o f tware licensed from
Microsoft, as well as associated updates, supplements,
internet-based services and support services, media, printed
mat e r i als, a n d "online" or elect ronic do c u m e ntation
Software") , are protecte d under this EULA. The
protected by copyright l aws and
international copyright treaties, as
("Microsoft
Software is also
well as other intellectual property laws and treaties. The Software is
licensed, not sold.
BY USING THE SOFTWARE, INCLUDING USE ON THIS DEVICE,
YOU ACCEPT THESE TERMS. IF YOU DO NOT
NOT USE THE DEVICE OR SOFTWARE.
FOR A REFUND OR CREDIT. As
INSTEAD CONTACT TRIMBLE
ACCEPT THEM, DO
described below, using some features also operates as y our consent to
the transmission of certain standard computer
Internet-based services.
WARNING - If t h e S oftw are co nt ains voice
information for
operated
technologies, then operating this Software requires user attention.
Diverting attention away from the road while driving can possibly cause
an accident or other serious consequence. Even occasional, short
diversions of attention can be dangerous if your
diverted away from your driving task at a
Microsoft make no
representations, warranties or other
critical time. Trimble and
attention is
determination s that ANY use of this Software is legal, safe, or in any
manner recommended or intended while driving or ot her wi se
operating a motor vehicle.
1
SOFTWARE
1.1
LIMITED WARRANTY FOR TRIMBLE PRODUCT
Limited Warranty. Trimble warrants that the Software,
exclusive of the Microsoft Software, will perform substantially
in
accordance with the accompanying written materials for a period of
twelve (12) months from the date of purchase. This limited warranty
gives you specific legal rights; you may have
state/jurisdiction to state/jurisdiction.
does not apply to Fixes, Minor
Updates, or Major Upgrades of the
others, which vary from
The above limited warranty
Software after expiration of the twelve (12) month limited warranty
period, all of which are provided “AS IS” and without warranty unless
otherwise
specified in writing by Trimble. Because the Software is
inherently complex and m ay not be completely fre e of
nonconformities, defects or errors, you are advised to verify your work.
Trimble does not warrant that the Software will operate error free or
uninterrupted, will meet your needs or
nonconformities c a n or will be corrected.
1.2
Software Fixes. During the limited warranty period
expectations, or that all
described in section 1.1 above, you will be entitled to receive such
Fixes to the Product Software that Trimble releases and
commercially available and for which it does not
subject to the procedures for delivery to
products generally. If you have
purchasers of Trimble
purchased the Product from an
makes
charge separately,
authorized Trimble dealer rather than from Trimble directly, Trimble
may, at its option,
Trimble Nomad 5 Handheld User Guide | 8
forward the software Fix to the Trimble dealer for final
distribution to you. Minor Updates, Major Upgrades, new
products, or substantially new software releases, as identified
by Trimble, are expressly excluded from this update process
and limited warranty. Receipt of Software Fixes or other
enhancements shall not serve to extend the limited warranty
period.
For purposes of this warranty the following definitions shall
apply : (1) "Fix(es)" means an error correction or other update
created to fix a previous software version that does not
substantially conform to its Trimble s pecific ations ; (2) "Minor
Update" occurs when enhancements are made to current
features in a software program; and (3) "Major Upgrade"
occurs when significant new features are added to software,
or when a new product containing new features replaces the
further development of a current product line. Trimble
reserves the right to determine, in its sole discretion, what
constitutes a Fix, Minor Update, or Major Upgrade.
1.3
Customer Remedies. Trimble’s and its suppliers’
entire liability, and your sole remedy, with respect to the
Software sh al l be either, at Trimble’s option, (a) repair or
replacement
paid for any
warranty. This
has resulted
misapplication; (2)
of the Software, or (b) return of the license fee
Software that does not meet Trimble’s limited
limited warranty is void if failure of the Software
from (1) accident, misuse, abuse, or
alteration or modification of the Software
without Trimble’s authorization; (3) interaction with software
or hardware not
improper,
maintenance or
this EULA. Any
supplied or supported by Trimble; (4) your
inadequate or unauthorized installation,
storage; or (5) if you violate the terms of
replacement Software will be warranted for
the remainder of the original warranty period or thirty (30) days,
whichever is
1.4
EXTENT
AND ITS
longer.
NO OTHER WARRANTIES. TO THE MAXIMUM
PERMITTED BY APPLICABLE LAW, TRIMBLE
SUPPLIERS DISCLAIM ALL OTHER WARRANTIES,
TERMS AND CONDITIONS, EIT H ER EXPRESS O R IMPLIED, BY
STATUTE,
COMMON LAW OR OTHERWISE, INCLUDING
BUT NOT LIMITED T O, I M P LI ED WA RR A N T IE S, TE RMS
AND
CONDITIONS OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, TITLE, AND
NONINFRINGEMENT WITH REGARD TO THE SOFTWARE,
ITS SATISFACTORY
FAILURE TO PROVIDE
EXTENT ALLOWED BY
WARRANTIES, TERMS AND
ARE LIMITED TO NINETY
QUALITY AND THE PROVISION OF OR
SUPP OR T SER V I CE S. TO THE
APPLICABLE LAW, IMPLIED
CONDITIONS ON THE SOFTWARE
(90) DAYS. Y0U MAY HAVE OTHER LEGAL RIGHTS WHICH
VARY FROM STATE/JURISDICTION TO STATE/JURISDICTION.
NO WARRANTIES FOR THE MICROSOFT SOFTWARE. THE
MICROSOFT SOFTWARE is provided “AS IS” and with all faults,
AND TRIMBLE PROVIDES NO WARRANTY WITH RESPECT
THERETO. THE ENTIRE RISK AS TO SATISFACTORY QUALITY,
PERFORMANCE,
ACCURACY AND EFFORT (IN C LUDI N G LACK OF
FOR THE MICROSOFT SOFTWARE IS WITH
NO WARRANTY AGAINST
INT
ERFERENCE WITH YOUR ENJOYMENT
YO U. ALSO, THERE I S
OF THE MICR OS OF T SOFTWAR E OR AGAINST INFRINGEMEN T.
1.5
PLEASE NOTE: THE FOREGOING TRIMBLE LIMITED
WARRANTY PROVISIONS MAY NOT APPLY TO SOFTWARE
LICENSES PURCHASED IN THOSE
JURISDICTIONS (SUCH AS
NEGLIGENCE)
PRODUCT
COUNTRIES OF THE EUROPEAN UNION) IN WHICH PRODUCT
WARRANTIES ARE OBTAINED
SUCH CASES, PLEASE
APPLICABLE WARRANTY INFORMATION.
2
2.1
TRIMBLE LIMITATION OF LIABILITY
LIMITATION OF LIABILITY. TO THE MAXIMUM EXTENT
PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL
OR ITS SUPPLIERS BE LIABLE FOR ANY SPECIAL,
FROM THE LOCAL DISTRIBUTOR. IN
CONTACT YOUR TRIMBLE DEALER FOR
TRIMBLE
INCIDENTAL,
INDIRECT, CONSEQUENTIAL OR PUN I TIVE DAMAGES HOWEVER
CAUSED AND REGARDLESS OF THE
(INCLUDING, WITHOUT LIMITATION,
BUSINESS PROFITS, BUSINESS
INFORMATION, OR ANY
THE USE OR
OF
OR FAILURE TO PROVIDE SUPPORT SERVICES, EV EN IF
INABILITY TO USE THE SOFTWARE, OR THE PROVISION
OTHER PECUNIARY LOSS) ARISING OUT OF
THEORY OF LIABILITY
DAMAGES FOR LOSS OF
INTERRUPTION, LOSS OF BUSINESS
TRIMBLE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES AND NOTWITHSTANDING ANY FAILURE OF
ESSENTIAL PURPOSE OF ANY EXCLUSIVE REMEDY PROVIDED
IN THIS EULA.
IN NO EVENT SHALL THE TOTAL CUMULATIVE LIABILITY OF
AND ITS SUPPLIERS IN CONNECTION WITH THIS
SOFTWARE, WHETHER BASED ON CONTRACT,
(INCLUDING NEGL IG EN CE), STRICT
TRIMBLE
EULA OR THE
WARRANTY, TORT
LIABILITY OR OTHERWISE,
EXCEED THE ACTUA L AMOUNT PAID TO TRIMBLE FOR THE SOFTWARE
LICENSE GIVING RISE
AND
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
TO THE CLAIM. B E CAUSE SO ME STA T ES
LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT
TO YOU.
3
3.1
GENERAL
This EULA shall be governed by the laws of the State of
California and applicable United States Federal law without
to “conflict of laws” principles or provisions. The
United N ation s
APPLY
reference
Convention on Contracts for th e I nter n at ional Sale of Goods will
not apply to this EULA.
action arising
from or related to this EULA or the Software shall lie
Jurisdiction and venue of any dispute or c
ourt
exclusively in or be transferred to the courts the County of Sant a Clara,
California, and/or the United States District Court for the Northern
District of California. You hereby consent and agree not to contest,
such jurisdiction, venue
and governing law.
Trimble Nomad 5 Handheld User Guide | 9
3.2
Section 3.1 notwithstanding, if you acquired this
product in Canada, this EULA is governed by the laws of the
Province of Ontario, Canada. In such case each of the parties to
this EULA irrevocably attorns to the jurisdiction of the courts of
the Province of Ontario and further agrees to commence any
litigation that may arise under this EULA in the courts located in
the Jud
icial District of York, Province of Ontario. If y
this product in the European Union, this EULA is
ou
acquired
governed by
the laws of The Netherlands, excluding its rules governing
conflicts of laws and excluding the United Nations Convention on
the International Sale of Goods. In such case each of the parties
to this EULA irrevocably attorns to the
of The Netherlands and further
litigation that may arise under this
Hague, The Netherlands.
3.3
EULA.
this
3.4
and of
Trimble reserves all rights not expressly granted by
Official Language. The official language of this EULA
any documents relating thereto is English. For purposes
jurisdiction of the courts
agrees to commence any
EULA in the courts of The
of interpretation, or in the event of a conflict between English
and versions of this EULA or related documents in any other
language, the English language version shall be controlling.
Trimble Nomad 5 Handheld User Guide |
Safety information
12
1 Introduction
19
Parts of the Nomad 5 handheld
22
2 Basic setup and operation
24
Waking and unlocking the device
30
Contents
Battery safety
Power supply safety
Touchscreen glass
Service safety
Safe environments of use
Distraction
Telecommunications & Internet Association (TIA)
SAR
Caring for your device
Cleaning
Touchscreen care
Battery care
Product specifications
12
13
13
14
14
14
14
15
15
15
15
16
17
Registration
Configuration options
In the box
Replacement and spare or optional accessories
20
20
20
20
Installing and removing a battery
Install ing a battery
Removing a battery
Inserting SD and SIM cards
Tet h er ing t h e stylus
Install ing a screen protector
Attaching the handstrap
Setting up your Nomad 5 handheld for the first time
Charging and power modes
Charging the battery
LED charging status
Turning the device on
About Sleep state
24
25
25
25
26
27
28
28
29
29
30
30
30
Contents
Trimble Nomad 5 Handheld User Guide | 10
Restarting the device
31
Display settings: auto rotation
36
3 Using the Android operating system
37
Navigation and the status bar
39
Airplane mode
43
5 Using accessories and connecting to other devices
45
Turning off the device
Checking the battery level
Making your battery last longer
Interacting with the device
Using the touchscreen
Using the onscreen keypad
Using the stylus
USB mouse and keyboards
Display settings: adjusting the backlight
31
31
32
33
33
35
35
35
35
Using Accounts
Using the Home screens
Adding apps to a Home screen
Removing apps from a Home screen
Using Apps
37
38
38
38
39
4 Using wireless networks
Working with Wi-Fi networks
Connecting to Wi-Fi
Disconnecting from Wi-Fi
Forgetting a Wi-Fi network
Advanced Wi-Fi settings
Working with mobile broadband
Using mobile data
Locating the device's IMEI number
40
40
40
41
41
41
42
42
43
Using t he charging cradle
Connecting to USB accessories
Using Bluetooth wireless technology
Turning Bluetooth on or off
Pairing and connecting a Bluetooth device with the Nomad 5 handheld
Transferring data between your Nomad 5 handheld and another computer
Transferring data using a micro USB Cable
Using EMPOWER modules
45
45
46
46
46
47
47
48
Contents
Trimble Nomad 5 Handheld User Guide | 11
Install ing EMP O WE R modules
49
6 Using the cameras
50
Viewing photos and videos
51
Getting more apps
54
8 Troubleshooting, downloading updates, and repair
55
Repairing your device
61
Ta king p h ot os and videos
Changing camera settings
Advanced camera settings
50
51
51
7 Using the p re-in stalled app s
Trimble EMPOWER Hub
Trimble GNSS Status utility
Bundled Google apps
52
52
52
53
Troubleshooting
Performance issues
EMPOWER module issues
Wireless connectivity issues
Power and battery issues
Restartin g or resetting the operating system
Operating system and software updates
Android 8.1 updates
Software downloads and updates
55
55
57
57
58
59
60
60
61
Trimble Nomad 5 Handheld User Guide | 12
1
Safety information
Batter y saf ety
Power supply safety
Touchscreen glass
Service safety
Safe environments of use
Distraction
Teleco m mu nic at io ns & Int er n et Association (TIA)
SAR
Caring for y our devi ce
Read this guide for important safety and health information and the terms of the Limited
Warranty that apply to the Trimble
printed guides for future reference. Failure to follow instructions and properly set up, use,
and care for this product can increase the risk of serious injury or death, or damage the
device or devices.
®
Nomad 5 handheld that you have purchased. Keep all
Battery safety
Lithium-Ion batteries are classified by the U. S. Federal Government as non-hazardous
waste and are safe for disposal in the normal municipal waste stream. These batteries
contain recyclable materials and are accepted for recycling. Dispose of used batteries in
accordance with local regulations.
WARNING – Non-approved batteries will not function in the device. Use only the
battery for the system for which it was specified. Only use the battery with a charging
system that has been qualified with the system per this standard. Use of an unqualified
battery or charger may present a risk of fire, explosion, leakage, or other hazard.
Trimble Nomad 5 Handheld User Guide | 13
Safety i nformation
WARNING – There are no user-serviceable parts in the batteries. Do not
disassemble or open, crush, bend or deform, puncture, or shred the battery. Do not
modify or remanufacture, attempt to insert foreign objects into the battery, immerse or
expose to water or other liquids, or expose to fire, explosion, or other hazard. Do not
expose to temperatures above +70 °C (+158 °F).
WARNING – Improper battery use may result in a fire, explosion, or other hazard.
Do not short circuit a battery or allow metallic or conductive objects to contact the
battery terminals.
Avoid dropping the device or battery. If dropped, especially on a hard surface, and
the user suspects damage to the battery, take it to a service center for inspection.
In the event of a battery leak, do not allow the liquid to come in contact with the skin
or eyes. If contact has been made, wash the affected area with large amounts of
water and seek medical advice.
Battery usage by children should be supervised.
Power suppl y safety
WARNING – Use only AC and vehicle adapters intended for the device. Other
external power sources may damage your product and void the warranty.
Ensure the input voltage on the adapter matches the voltage in your location.
Ensure the adapter has prongs compatible with your outlets.
The AC power supply is designed for indoor use only. Avoid using the AC power
supply in wet areas.
Unplug the power supply from power when not in use.
Do not short the output connector.
Touchscreen glass
CAUTION – The touchscreen on this device is made of glass. This glass could break
if the device is dropped on a hard surface or receives a significant impact. If the glass
chips or cracks, do not touch or attempt to remove the broken glass. Cracked or
chipped glass due to misuse or abuse is not covered under the product’s limited
warranty.
Trimble Nomad 5 Handheld User Guide | 14
Safety i nformation
WARNING – Do not attempt to take apart, open, service, or modify the product,
accessories, or power supply. Doing so could present the risk of electric shock or other
hazard. Any evidence of any attempt to open and/or modify this device, including any
peeling, puncturing, or removal of any of the labels, will void the Limited Warranty.
Safe environments of use
Service safety
WARNING – Areas with potentially explosive atmospheres are often, but not
always, posted and can include fueling areas, such as below decks on boats, fuel or
chemical transfer or storage facilities, or areas where the air contains chemicals or
particles, such as grain dust, or metal powders. When you are in such an area, turn off
your mobile device, and do not remove or install battery chargers, AC adapters, or any
other accessory. In such areas, sparks can occur and cause an explosion or fire.
Distraction
WARNING – Using the device in some circumstances can distract you and may
cause a dangerous situation. Observe rules that prohibit or restrict the use of mobile
devices (for example, avoid operating the device while driving a vehicle).
Telecommunications & Internet A ssociation (TIA)
Hearing Aids: Some digital wireless phones may interfere with some hearing aids. In the
event of such interference, you may want to consult your service provider, or call the
customer service line to discuss alternatives.
Pacemakers and Other Medical Devices: The Health Industry Manufacturers Association
recommends a minimum separation of six inches be maintained between a handheld
wireless phone and a pacemaker to avoid potential interference with the pacemaker.
These recommendati ons are consistent with the independent research by and
recommendations of Wireless Technology Research. Persons with pacemakers should use
the ear opposite the pacemaker to minimize the potential for interference. If you have any
reason to suspect that interference is taking place, turn the phone OFF immediately.
If you use any other personal medical device, consult the manufacturer of your device to
determine if they are adequately shielded from external RF energy. Your physician may be
able to assist you in obtaining this information.
Trimble Nomad 5 Handheld User Guide | 15
Safety i nformation
Turn the phone OFF in health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be using equipment that could
be sensitive to external RF energy.
SAR
This device complies with FCC and CE standards when used as designed.
Caring for your device
Cleaning
Turn off the device, and disconnect it from external power. Use a soft, dampened cloth
with either water or a diluted mild detergent. If a mild detergent is used, ensure all soap
residue is removed. Do not use chemical cleaners.
Touchscre en care
The Nomad 5 handheld is extremely rugged, and is designed to withstand extreme
conditions and harsh treatment, however taking proper care of the touchscreen will
prolong the life and ensure optimal display performance of the touchscreen of this
product. Excessive or prolonged exposure to abrasives, oil, dust, chemicals, and ultraviolet
light can affect the performance of your touchscreen over time.
To hel p protect the screen:
Clean it frequently. Use a soft, lint-free cloth to wipe the screen. You can dampen the
cloth with water or an eyeglass cleaner. If the display is very dirty, it can be washed off
under a gently running tap.
WARNING – Make sure that all ports and doors are fully closed, and that the
device is not connected to an external power supply. Do not use chemical or
abrasive cleaners.
Keep it covered when not in use. Store the Nomad 5 handheld in a carry case or
pouch while you are in transit or not using it.
Keep it out of the sun when not in use. Do not store the Nomad 5 handheld in direct
sunlight for a long time unnecessarily. Ultraviolet light and excessive heat from sunloading heat can damage the display.
Use proper touchscreen tools. Use either fingers or the Nomad 5 handheld's stylus
pen, or other devices specifically designed for use with capacitive touchscreens to
operate the touchscreen of this device. The use of ballpoint pens, metal tools or other
Trimble Nomad 5 Handheld User Guide | 16
Safety i nformation
sharp objects to operate the touchscreen may scratch and/or damage the surface of
the touchscreen.
Avoid drops, tumbles, and abrasives. The Nomad 5 handheld is designed to resist
damage for drops up to 122 cm (4 feet). However, you should protect the display from
impact, pressure, and abrasive substances that can scratch it or crack it. The device
should not be dropped unnecessarily. Use the scr een protectors to keep the
touchscreen clean and protected, following the instructions provided on the screen
protector packaging.
Battery care
Use and storage temperature: Lithium-ion batteries are sensitive to high temperatures,
so keep the device's batteries out of direct sun for long periods, and do not leave batteries
in a hot car, especial l y on a dashboard in full sun or other environments where
temperatures can exceed +70 °C (+158 °F) Battery life can be shortened if stored or
operated outside of these temperature ranges. Recommended storage temperature is at
room temperature (~ +20 °C / +68 °F). When you are using the device or charging the
batteries, it is normal for the device and batteries to get warm.
If the interior temperature of the device exceeds normal operating temperatures (for
example, in a hot car or in direct sunlight for extended periods of time), you may
experience the following as it attempts to regulate its temperature automatically:
The device stops charging.
If the device cannot regulate its internal temperature, it may go into a Sleep state until it
cools.
Move the device to a cooler location out of direct sunlight and wait a few minutes before
trying to use the device again.
Charging: Recharge the battery any time; the battery does not need to be empty or low
before you recharge it. However, it is best to let the battery run to below 10 percent at least
once a month before you recharge it . B at t ery r e ch argi n g is supported at temperatures
between 0 °C and +45 °C (+32 °F and +113 °F). Use only the manufacturer designated
charging accessories to recharge the batteries.
Other environmental conditions: The batteries are sealed from water and dust, and are
tested for protection from drops from heights up to 122 cm (4 feet). However to prolong
the life of the battery, dry it off with a cloth if it becomes wet, do not intentionally submerge
the battery, and take care to avoid unnecessary drops, mechanical shocks, and vibrations.
The Nomad 5 handheld is designed to work in ambient temperatures between -30 °C and
+60 °C (-22 °F and +140 °F) and to be stored in temperatures between -40 °C and +70 °C (40 °F and +148 °F). Avoid exposing the device to dramatic changes in temperature or
humidity.