Quick Installation Guide
TU-IDES
H/W: v1.0R
Table of Contents
Table of Contents
English ......................................................................................................
1. Before You Start
2. How to Install ....................................................................................
Troubleshooting ........................................................................................
.................................................................................
1
1
2
4
Version 03.21.2008
1. Before You Start
Package Contents
TU-IDES
?
SATA cable
?
Power Y cable
?
Quick Installation Guide
?
System Requirements
CPU: 300MHz or above / 800MHz or above for Windows Vista
?
?Memory: 256MB RAM or above / 512MB RAM or above for Windows Vista
?IDE device (e.g. Hard Drive, CD-ROM drive)
?Computer with SATA motherboard
Application
IDE to Serial
ATA Converter
(TU-IDES)
IDE
Device
To Connector of Serial
Motherboard
ATA Port
1
English
Power
Cable
To PC Power
Supply Connector
2. How to Install
1. Shutdown your computer. Then
open up your computer.
2. Connect your IDE device to the
TU-IDES.
3. Connect the provided SATA cable
to the SATA receptacle on the
TU-IDES.
4. Connect the female Berg power
connector on the provided power
Y-cable to the TU-IDES.
English
2
5. Connect the female Molex power
connector on the provided power
Y-cable to your IDE device
(e.g. Hard Drive, CD-ROM drive).
6. Connect the provided SATA cable
to the SATA receptacle on the
motherboard on your computer.
7. Connect an available female Molex
power connector on your computer
to the male Molex power connector
on the provided power Y-cable.
8. Boot up your computer.
Your installation is now complete.
To ensure the highest level of customer service and support, please take a moment to
register your product Online at: www.trendnet.com/register
Thank you for choosing TRENDnet
3
English
Register Your Product
Troubleshooting
Q1:
My computer does not recognize my IDE device. What should I do?
A1:
First, verify that the computer meets the minimum requirements as listed in
section 1. Second, verify all the connectors are secured (see section 2). Third,
connect the SATA data cable to a different SATA receptacle on the motherboard.
Fourth, connect the TU-IDES to a different IDE power connector on your computer.
Fifth, connect a different IDE device to the TU-IDES.
If you still encounter problems or have any questions regarding the TU-IDES, please
contact TRENDnet's Technical Support Department.
4
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may
cause undesired operation.
Waste electrical and electronic products must not
be disposed of with household waste. Please
recycle where facilities exist. Check with you Local
Authority or Retailer for recycling advice.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
TRENDnet Technical Support
.
US Canada
Toll Free Telephone: 1(866) 845-3673
24/7 Tech Support
Europe (Germany France Italy Spain Switzerland UK)
Toll Free Telephone: +00800 60 76 76 67
English/Espanol - 24/7
. . . . .
Worldwide
Telephone: +(31) (0) 20 504 05 35
English/Espanol - 24/7
Product Warranty Registration
Please take a moment to register your product online.
Go to TRENDnet’s website at http://www.trendnet.com/register
20675 Manhattan Place
Torrance, CA 90501
USA
Copyright ©2008. All Rights Reserved. TRENDnet.
Loading...