TRENDnet TS-I300W, USB 2.0 IDE Network Storage Enclosure, TS-I300 User Manual

Quick Installation Guide

TS-I300

TS-I300W

Table of Contents

Table of Contents

English .....................................................................................................

1. Before You Start

2. .........................................................................

Hardware Installation
Configure the Storage Server

3. ............................................................

4. Accessing Storage Devices on TS-I300/TS-I300W ...........................

Troubleshooting ........................................................................................

................................................................................

1

1
2
4
7

8

Version 07.06.2006

1. Before You Start

System Requirements

Web Browser: Internet Explorer (5.5 or higher)
A computer with a network adapter properly installed.
A network Switch or Hub with an available network LAN port.
A RJ-45 network cable.
IDE Internal Hard Drive or USB 2.0 Storage Device (i.e. flash drive,

external hard drive; not included)

Windows XP, 2000, NT, ME, 98, Linux

Application

Package Contents

TS-I300/TS-I300W
User's Guide CD-ROM
Quick Installation Guide
Mounting Stand
AC Power Adapter (12V DC, 3.0A)
1 x 2dBi Detachable Antenna (TS-I300W)

USB 2.0 & IDE Network Storage Enclosure (TS-I300)

USB 2.0 & IDE Wireless Network Storage Enclosure (TS-I300W)

DATA

Or

HD

1

English

2. Hardware Installation

Note: Before installing the IDE hard drive, the jumper settings must be set to
Master.

1. Remove the two screws from the
rear panel to detach the cover.

2. Make sure the jumper settings on
the hard drive is set to Master.

3. Connect the IDE cable and power

cable to the hard drive.

4. Place the hard drive onto the metal

bracket and secure it with four
mounting screws.

5. Replace the cover and secure the

two screws.

2

English