TRENDnet TPE-115GI Specsheet
PRODUCT OVERVIEW
• Full Duplex Gigabit speeds
• Converts a non-PoE Gigabit port to a PoE+ or PoE Gigabit port
• Integrated power supply
• Network distances of up to 100 meters (328 feet)
• Save on installation and equipment costs
Gigabit PoE+ Injector
TPE-115GI (v1.0R)
The Gigabit PoE+ Injector, model TPE-115GI, combines electrical
power with a Gigabit network connection to produce a Gigabit Power
over Ethernet Plus (PoE+) signal. Connect this device to a non-PoE
Gigabit switch and then run an Ethernet cable for up to 100 meters
(328 ft.) to network PoE+ or PoE devices. The integrated power supply
reduces installation clutter.
Auto sensing technology delivers 30 Watts to 802.3at PoE+ devices or
15 Watts to 802.3af PoE devices. No need to buy a PoE switch—use
an existing open port from a non-PoE switch to save installation and
equipment costs when installing TRENDnet PoE access points and IP
cameras in remote locations.
FEATURES
• IEEE 802.3at PoE+ (30 Watt) compliant
• Backwards compatible with IEEE 802.3af PoE (15 Watt) devices
• Automatically supplies a PoE+ (30 Watts) or PoE (15 Watts) connection to the device
• Integrated power supply
• Network devices for distances of up to 100 meters (328 ft.)
• 1 x 10/100/1000 Mbps Auto-MDIX Data In port
• 1 x 10/100/1000 Mbps PoE+ Auto-MDIX Data Out port
• Power port with LED indicator
• Easily install a PoE+ or POE device where a power outlet is not available
• Reduce installation and network equipment costs
• Safeguards network devices with short circuit protection
• 3-year limited warranty
TPE-115GI
rev: 12.26.2012
Gigabit PoE+ Injector
TPE-115GI (v1.0R)
SPECIFICATIONS
HARDWARE
Standard • IEEE 802.3 10Base-T
• IEEE 802.3u 100Base-TX
• IEEE 802.3ab Gigabit Ethernet
• IEEE 802.3af Power over Ethernet
• IEEE 802.3at Power over Ethernet Plus (PoE+)
Network Media • 10 Mbps: UTP/STP Cat. 5 and 5e up to 100 meters
• 100 Mbps: UTP/STP Cat. 5 and 5e up to 100 meters
• Gigabit: UTP/STP Cat 5e and 6 up to 100 meters
Ports • 1 x 10/100/1000 Mbps Data-In (Data only)
• 1 x 10/100/1000 Mbps PWR+Data out (Data + Power)
PoE Delivery • Pair 1: Pin 1, 2
• Pair 2: Pin 3, 6
Power • Input: 100~240 V, 50~60 Hz, 0.65 A max.
Power Consumption • Max 30 Watts
Dimensions (W x D x H) • 133 x 63 x 35 mm (5.2 x 2.5 x 1.4 in.)
Weight • 162 g (5.7 oz.)
Temperature • Operation: -10°C~45°C (14°F~ 113°F)
• Storage: -20°C~60°C (-4°F~140°F)
Humidity • Max 95% (non-condensing)
Certifi cations • CE, FCC
NETWORKING SOLUTIONS
PACKAGE CONTENTS
TPE-115GI
Quick Installation Guide
Power cord
RELATED PRODUCTS
TPE-105I PoE+ Injector
TEG-S50g 5-Port Gigabit GREENnet Switch
TV-IP672PI Megapixel PoE Day / Night PTZ Internet Camera
CONTACT INFORMATION
20675 Manhattan Place,Torrance, CA 90501 USA
Tel: 1-310-961-5500
Fax: 1-310-961-5511
Web: www.trendnet.com
Email: sales@trendnet.com
1-888-326-6061
TPE-115GI
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at any time, without
notice. For the most recent product information please visit http://www.trendnet.com Copyright ©TRENDnet.All Rights Reserved.
rev: 12.26.2012
Loading...