TRENDnet TK-1603R, TK-803R Quick Reference Guide

Command

Hot Keys

Description

Front Panel Button

TK-803R / TK-1603R KVM General Quick Reference Sheet

Select Computer

Next Higher Computer Channel

Next Lower Computer Channel

Stop Autoscan

Autoscan

Mouse/Keyboard Reset Consele

Autoscan Beep Sound On/Off

Autoscan with Programmable Delay Time

Restore to Factory Defaults

Define Hot key Sequence (Default = Scroll Lock + Scroll Lock )

Select the desired computer

Select the next higher available computer

Select the next lower available computer

Autoscan through every connected channel for quick screen browsing of each channel

Autoscan through every connected channel for quick screen browsing of each channel in (10-100 seconds)

Terminate autoscan activity

Terminate autoscan activity.

Toggle On/Off beep sound during autoscan mode

Resets Mouse/Keyboard

Select the hot key preceding sequence among 5 options

Press the push button for a specific port to switch to that computer

TK-803R

TK-1603R

(Y) = 1-digit port number (1~8)

(YZ) = 2-digit port number (01-16)

(Y) = Scroll Lock, Caps Lock, Esc, F12 or Num Lock

Press push button for a specific port on the switch

—

Press any button

Press and hold down button 4 for over 8 seconds, then release the button and press

(Y) = Scroll Lock, Caps Lock, Esc, F12 or Num Lock

Scroll Lock

(X) fx = 0 ~ 9 1 = 10 seconds 2 = 20 seconds 3 = 30 seconds 4 = 40 seconds 5 = 50 seconds 6 = 60 seconds 7 = 70 seconds 8 = 80 seconds 9 = 90 seconds 0 = 100 seconds

Scroll Lock Scroll Lock

(Y)

(X)

(Z)

(Y)

Press any key on keyboard

Scroll Lock Scroll Lock

—

Scroll Lock Scroll Lock+END

Scroll Lock Scroll Lock

Note:

1. The hot key sequence denotes that you should hit the individual key consecutively one at a time, not simultaneously.

2. After pressing the Scroll Lock key, you have 2 seconds to press the Scroll Lock key again. You then have another 2 seconds to press a command key. A beep confirms that the KVM switch is in “hot key” mode. If you do not press a key within 2 seconds, the switch will exit hot key mode.

Scroll Lock

(Key)