TI-PG1284i
12-Port Hardened Industrial Gigabit PoE+ Layer 2+
Managed DIN-Rail Switch
TI-PG1284i (v1.0R)
• Hardened IP30 rated metal enclosure with integrated DIN-Rail mount
• Wide operating temperature range - 40 to 75 °C (-40 to 167 °F)
• 8 x Gigabit PoE+ (802.3at) ports, 4 x Gigabit SFP slots, and 1 x console port
• 240 Watts total power budget
• Dual redundant power inputs and alarm relay output
• CLI (Console / Telnet / SSH), Web (HTTP / HTTPS), SNMP v1 / 2c / 3 management
• 802.1Q / Q-in-Q VLAN and IGMP Snooping / MLD / MVR support
• 802.1p / DSCP / Queue Scheduling (SPQ / WRR) QoS support
• Power supply sold separately (model: TI-S24048)
TRENDnet’s 12-Port Hardened Industrial Gigabit PoE+ Layer 2+ Managed DIN-Rail Switch, model TI-PG1284i, has eight Gigabit PoE+ ports, four
Gigabit SFP slots, and a 240 Watts PoE budget. The switch is equipped with an IP30 rated metal enclosure and designed to withstand a high degree of
vibration, shock, protection against ESD / EMI / surge, and operate within a wide temperature range (- 40 – 75 °C (- 40 - 167°F)) for harsh environments.
L2+ management include features such as PoE port control, 802.1Q / Q-in-Q VLAN, multicast, spanning tree, link aggregation, QoS, IPv4 / IPv6 static
routing, ACLs, and 802.1X which allow for network integration flexibility.
TI-PG1284i
Industrial Hardened Design
Equipped with a rugged IP30 rated enclosure
and designed to withstand a high degree of
vibration, shock, protection against ESD / EMI
/ surge, and operate with a wide temperature
range (- 40 – 75 °C (- 40 - 167 °F)) for harsh
environments.
Networking Solution
Integration Flexibility
Managed features include PoE control, IP
static routing, access control lists, VLAN, IGMP
snooping, QoS, RMON, SNMP trap, and
syslog for monitoring and flexible network
integration.
Fault Tolerance
Features dual redundant power inputs
(Primary and RPS) from external power
sources and an output alarm relay to indicate
the event of input power failure.
TI-PG1284i
Full PoE+ Power Budget
Supplies up to 30 Watts of PoE / PoE+ power per port
with a 240 Watts PoE power budget
Network Ports and Capacity
8 x Gigabit PoE+ ports and 4 x Gigabit SFP slots
allow for a 24 Gbps switching capacity and 1 x
console (RJ-45 to RS-232) for out-of-band
management
Integrated DIN-Rail Mount
IP30 rated metal enclosure with integrated DIN-Rail
mounting hardware
Full PoE Control Per Port
PoE control features include enabling/disabling PoE
and class, power priority, PD alive check, scheduling,
and power delay per port using CLI or web
management.
Traffic Management
Managed features include 802.1Q / Q-in-Q / GVRP /
MAC & Protocol-Based VLAN, IGMP v1 / 2 / 3, IGMP
Snooping, MLD, MVR, per port bandwidth control /
802.1p / DSCP / Queue Scheduling (SPQ / WRR),
STP / RSTP / MSTP spanning tree, static and
dynamic link aggregation, and Xpress Ring + ERPS
protection for flexible network integration.
Layer 2+ Management
Offers IPv4 / IPv6 static or DHCPv4 / v6 assignment,
IPv4 / IPv6 static routing and proxy ARP, DHCP
server / relay / option 82, and DHCP server snooping /
screening to filter out unauthorized DHCP servers
Redundant Power
Dual redundant power inputs (primary and RPS) with
overload current protection
Alarm Output
Alarm relay output triggered by power failure of
primary and/or redundant power and failure per port
(DIP switch)
Jumbo Frame
Sends larger packets, or Jumbo Frames (up to 10 K)
Wide Temperature
Hardened switch is rated for an operating temperature
range of - 40 to 75 °C (-40 to 167 °F)
Electro Magnetic Compliance
Complies with IEC61000-6-2 EMC generic standard
immunity for industrial environments
Shock and Vibration Resistant
Rated for shock (IEC 60068-2-27), freefall (IEC
60068-2-32), and vibration (IEC 60068-2-6)
LED Indicators
LED indicators convey power, redundant power,
alarm, SFP, PoE, and network port status
Grounding Point
Grounding point protects equipment from external
electrical surges
Access Controls
Management via HTTPS and SSH protocols and
features such as trusted host, ACLs, IP-MAC-Port
binding, ARP inspection, 802.1X RADIUS, MAC
address learning, IP Source Guard provide layered
network access controls.
System Monitoring
Monitoring features include SNMP v1 / v2c / 3, MIB
support, SNMP trap, RMON Groups (1, 2, 3, 9), SMTP
alert, syslog, port mirroring, SFP DDMI, and ModBus /
TCP.
Specifications
Standards
• IEEE 802.1d
• IEEE 802.1p
• IEEE 802.1Q
• IEEE 802.1s
• IEEE 802.1w
• IEEE 802.1X
• IEEE 802.1ab
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3x
• IEEE 802.3z
• IEEE 802.3ab
• IEEE 802.3ad
• IEEE 802.3af
• IEEE 802.3at
Device Interface
• 8 x Gigabit PoE+ ports
• 4 x Gigabit SFP slots
• 1 x Console port (RJ-45)
• 6-pin removable terminal block (Primary / RPS
power inputs & alarm relay output)
• DIP switch (Alarm for primary / RPS power and
ports / slots failure)
• LED indicators
Data Transfer Rate
• Ethernet: 10 Mbps (half-duplex), 20 Mbps (fullduplex)
• Fast Ethernet: 100 Mbps (half-duplex), 200 Mbps
(full-duplex)
• Gigabit Ethernet: 2000 Mbps (full-duplex)
• SX / LX: 2000 Mbps (full-duplex)
Performance
• Switch fabric: 24 Gbps
• RAM buffer: 128 MB
• MAC address table: 16K entries
• Jumbo frames: 10 KB
• Forwarding rate: 17.86 Mpps (64-byte packet size)
Management
• CLI (Console, Telnet, SSH)
• HTTP / HTTPS (SSL) web based GUI
• SNMP v1, v2c, 3
• SNMP trap
• RMON groups 1, 2, 3, 9
• LLDP
• SNTP
• SMTP alert
• Syslog
• Port statistics / utilization
• Traffic monitor
• Port mirror (Ingress, Egress, Both)
• Storm control (Multicast, DLF, Broadcast)
• Modbus / TCP
• IPv6 static IP address, DHCPv6 client
• Dual Image
• Auto Provision via FTP / TFTP / HTTP Server
• Xpress Ring
• ERPS (Ethernet Ring Protection Switching)
G8032v2
• SFP DDMI (Digital Diagnostic Monitoring Interface)
MIB
• MIB II RFC 1213
• Bridge MIB RFC 1493
• Ethernet Interface MIB RFC 1643
• RMON MIB RFC 1757
Spanning Tree
• STP (Spanning Tree protocol)
• RSTP (Rapid Spanning Tree protocol)
• MSTP (Multiple Spanning Tree protocol)
Link Aggregation
• Static link aggregation
• 802.3ad dynamic LACP
• Up to 6 link aggregation groups
Quality of Service (QoS)
• 802.1p Class of Service (CoS)
• DSCP (Differentiated Services Code Point)
TI-PG1284i
• Bandwidth control per port
• Queue Scheduling: Strict Priority (SP), Weighted
Round Robin (WRR)
VLAN
• 802.1Q tagged VLAN
• MAC-based VLAN
• Dynamic GVRP
• Protocol-based (Ethernet II, Non-LLC-SNAP, LLCSNAP)
• Q-in-Q VLAN stacking / double VLAN (port-based,
selective)
• Port isolation
• Up to 256 VLAN groups, ID range 1-4094
Multicast
• IGMP snooping v1, v2, v3
• MVR
• MLD v1, v2
• IGMP filtering / querier / proxy
• Static multicast address
• Up to 256 multicast entries
Access Control
• 802.1X port-based network access control RADIUS
• Local dial-in user authentication
• DHCP snooping / screening
• Loopback detection
• ARP inspection
• IP Source Guard
• IP-MAC-Port binding
• Trusted host
• MAC address learning
ACL IPv4
• MAC Address
• VLAN ID
• Ethernet Type
• IP Protocol 0-255
• TCP / UDP Port 1-65535
• DSCP
TI-PG1284i
Layer 3 Features
• IPv4 / IPv6 static routing
• IPv4 / IPv6 proxy ARP
• IP interfaces: Up to 16
• Routing table entries: Up to 500 (IPv4: 400 / IPv6:
100)
• DHCP Server / Relay / Option 82
Special Features
• CLI & web based management
• Full power PoE+
• Wide operating temperature range
• Dual redundant power inputs
• Alarm relay triggered by power and ports / slots
failure
• Surge / ESD protection
• L2+ management features
Power
• PWR (Primary) terminal input: 48 – 57V DC (TIS24048 sold separately)
• RPS (Redundant) terminal input: 48 – 57V DC (TIS24048 sold separately)
• Consumption: 18 W (max.), 260 W (max.) with
PoE+ fully loaded
Optional Power Supply (TI-S24048 sold
separately)
• Input: 100-240 V AC, 50 / 60 Hz, 1.8 A 125-370 V
DC
• Output: 240 Watts, 48 V, 5 A
• DIN-rail: TS-35 / 7.5 or 15
• Operating Temperature: - 25 to 70 °C (- 13 to 158
°F)
PoE
• PoE budget: 240W
• Up to 15W per port for PoE
• Up to 30W per port for PoE+
• Mode A: Pins 1, 2 (V+) and pins 3, 6 (V-)
• PoE enable / disable per port setting, priority,
scheduling, power delay, and PD alive check
Enclosure
• IP30 rated metal enclosure
• DIN-Rail mount
• Grounding point
• ESD (Ethernet) Protection: 8KV DC
• Surge (Power) Protection: 6KV DC
MTBF
• 99,992 hrs @ 75 °C
• 322,805 hrs @ 25 °C
Operating Temperature
• - 40 to 75 °C (-40 to 167 °F)
Operating Humidity
• Max. 95% non-condensing
Dimensions
• 170 x 132 x 50 mm (6.69 x 5.2 x 1.97 in.)
Weight
• 920 g (2.03 lbs.)
Certifications
• CE
• FCC
• Shock (IEC 60068-2-27)
• Freefall (IEC 60068-2-32)
• Vibration (IEC 60068-2-6)
Warranty
• Limited Lifetime Warranty
Package Contents
• TI-PG1284i
• Quick Installation Guide
• CD-ROM (User’s Guide)
• Console cable (RJ-45 to RS-232)
20675 Manhattan Place • Torrance • CA 90501 • USA • T: 1-888-326-6061 • F: 1-310-961-5511 • sales@trendnet.com • www.TRENDnet.com
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at any time, without notice. For the most
recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.
Updated: 5/31/2016
Loading...