Trendnet TFC-210S20D3 QUICK INSTALLATION GUIDE
10/100Mbps-TX to 100Base-FX
Dual-Wavelength Single-Mode Fiber Converter
TFC-210S20D3 (v1.0R)
TFC-210S20D3 Bi-Directional Single-Fiber Media Converter
transforms 10/100Mbps-TX UTP/STP media to 100Base-FX media
and vice versa. The 10/100Mbps-TX Port Auto-Negotiating 10 or
100Mbps connection speed with Auto-MDIX media type, the fiber
supports single-mode SC type connection. This converter will give
your Switch/Hub the ability to interface with fiber connection over a
distance up to 20 km.
FEATURES
• Compliant with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX, 100Base-FX standards
• One 10/100Base-TX Auto-Negotiation/Auto-MDIX RJ-45 port
• One 100Base-FX Dual-Wavelength Single-Mode Single-Strand SC-type Fiber port
• Supports LLCF (Link Loss Carry Forward)
• Provides Dip switch to set: UTP (Auto Negotiation/Full Duplex), Fiber (Hall Duplex/Full Duplex) , LLCF (Enable/Disable), Mode
(Pure Converter Mode/ Switch Converter Mode)
• 802.3x flow control for 10/100Base-TX port
• Plug & Play, Hot Pluggable
• Diagnostic LEDs
• Optional 19” Fiber Converter Chassis (TFC-1000) holds up to 10 Fiber Converters
• 5-Year Warranty
TFC-210S20D3
rev:03.02.2007
10/100Mbps-TX to 100Base-FX Dual-Wavelength Single-Mode Fiber Converter
TFC-210S20D3 (v1.0R)
SPECIFICATIONS
Hardware
Standard
Network Media
Minimum Cable Length
Protocol
Frame Packet Size
Ports
Dip Switch
Transfer Rate
Diagnostic LED
Power Adapter
Transfer Rate
Dimensions
Weight
Temperature
Humidity
Certification
• IEEE 802.3 10Base-T • IEEE 802.3u 100Base-TX, 100Base-FX
• 10Base-T: UTP/STP Cat. 3, 4, 5, EIA/TIA-568 100-ohm
• 100Base-TX: UTP/STP Cat. 5, EIA/TIA-568 100-ohm
• 100Base-FX: 9/125um Single Mode Simplex SC-Type Cable, up to 20km
• 50 Meters
• CSMA/CD
• 64 to 1600 Bytes
• 1 x 10/100Base-TX RJ-45 Port • 1 x 100Base-FX Single-Mode Bi-Directional SC-Type Fiber Port
• Dip Switch 1: ON: TX Port Fully Duplex OFF: TX Port Auto- Negotiation
• Dip Switch 2: ON: FX Port Half Duplex OFF: FX Port Full Duplex
• Dip Switch 3: ON: LLCF Enable OFF: LLCF Disable
• Dip Switch 4: ON: Pure Converter Mode OFF: Switch Converter Mode
* After changing the DIP Switch settings, power cycle the Fiber converter.
• 100Mbps (Half/Full Duplex)
• Per Device: Power
• Per port (TX): 100Mbps, Link/Activity, Full Duplex/Collision; (FX): Link/Activity, Full Duplex/Collision
• 9V DC, 700mA External Power Adapter
• 3.1 Watts (max)
• 85 x 125 x 25mm (3.35 x 4.92 x 0.98in.)
• 300g (10.6oz.)
• Operating : 0°C ~ 45°C (32°F ~ 113°F) • Storage : -40°C ~ 70°C (-40°F ~ 158°F)
• 5% ~ 90% RH
• CE, FCC
Media
TFC-210S20D3
*The Single-Strand WDM Single-Mode Fiber Converter TFC-210S20D3 must be paired with TFC-210S20D5.
WDM
(Single Mode)
TX:1310nm (1260nm~1360nm)
RX:1550nm (1480nm~1600nm)
Wavelength
Power Output (dBm)
-14 -31
RELATED PRODUCTSPACKAGE CONTENTS
• TFC-210S20D3
• Multi-Language Quick Installation Guide
• Power Adapter
TFC-1000
TFC-210S20D5
ORDERING INFORMATION
20675 Manhattan Place,Torrance, CA 90501 USA
Tel: 1-310-961-5500
Fax: 1-310-961-5511
www.trendnet.com
Web:
Email: sales@trendnet.com
To Order Please Call:
1-888-326-6061
Sensitivity
10-Bay Fiber Chassis
10/100Mbps-TX to 100Base-FX Dual-Wavelength
Single-Mode Fiber Converter
Power Budget (dBm)
17
Distance
20km
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document per tain to TRENDnet
products and is subject to change at any time, without notice. For the most recent prod uct information please visit
Copyright TRENDnet. All Rights Reserved.
©
http://www.trendnet.com.
Loading...