TRENDnet TFC-110S40D5i Specsheet
TFC-110S40D5i
Intelligent 100Base-TX to 100Base-FX Dual
Wavelength Single Mode SC Fiber Converter (40 km
/ 24.9 miles)
TFC-110S40D5i (v1.0R)
• Must pair with TFC-110S40D3i
• Port level SNMP management support
• SC-type dual-wavelength single-mode fiber port
• 10/100Base-TX RJ-45 port
• Spans distances up to 40 km (24.9 miles)
• Functions as a standalone converter or with the TFC-1600 fiber chassis
The TFC-110S40D5i intelligent fiber converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Dual Wavelength
Single Mode SC-Type fiber converter that spans distances up to 40 km (24.9 miles). This module must be used with the TFC-110S40D3i module. Ports
include 1 x 10/100Base-TX (RJ-45) port and 1 x 100Base-FX (SC Simplex Type) port.
• Must pair with TFC-110S40D3i
• Compliant with IEEE 802.3u 100Base-TX and 100Base-FX standards
• 1 x 10/100Base-TX RJ-45 port
• 1 x 100Base-FX single-mode bi-directional simplex-SC type fiber port
• Supports port level SNMP management
• Monitor and configure Ethernet or Fiber’s duplex mode, LLR, port on / off and receive link
down information via management module TFC-1600MM and chassis TFC-1600
• Dip switch controls: Fiber (Full / Half-Duplex), UTP (Auto negotiation / Manual), Speed
(10 Mbps / 100 Mbps),
• Copper (Full / Half-Duplex), LLR (Enable / Disable), and LLCF (Enabled / Disable)
• Link Loss Carry Forward (LLCF) support
• Link Loss Return (LLR) support
• Status LED indicators for Power and Link / Activity
• Removable metal enclosure
• Wall mountable
• Functions as a standalone converter or with the TFC-1600 fiber chassis
• 3-year limited warranty
TFC-110S40D5i
Loading...