TRENDnet TEW-723BRM Quick Install Guide

Quick Installation Guide

N300 WiFi ADSL 2+ Router

TEW-723BRM

English

It is recommended that you position the antennas
vertically as shown for optimal wireless coverage.

If DSL filter is required:

Phone Jack

Hardware Installation

LINE

DSL Filter
(Accessory
not included)

Phone (Optional)

MODEMPHONE

3

Verify that the POWER, WLAN LED
indicators are on and solid green and
DSL LED indicator is flashing green
before continuing to the next step.

ON/OFF

Plug the included power adapter into an

2

available outlet and into your modem
router. Then push the On/Off power button
to turn on your modem router.

Telephone Cable

Power Adapter

Phone Jack

1

Connect the phone jack that provides your DSL Internet
service to the DSL port on your router with the included
telephone cable.

Note: A DSL filter is only required if you are using the
same phone line for both phone calls and Internet service.
(DSL filter accessory not included.)

Setup using Web Browser

1. Connect your computer to the router (Wired or Wireless).

Wired

Connect your computer to one of the four LAN ports (LAN1-4) using the included Ethernet cable as shown.

6. Select your Country and ISP (Internet Service Provider). If required, enter any additional information such as user name and
password and/or static IP address settings, then click Next. If your country or ISP is not listed, select Others and manually enter the
required information. You may need to contact your ISP for details about your Internet connection settings.

Manufacturer’s Name and Address

TRENDnet, Inc.
20675 Manhattan Place
Torrance, CA 90501 USA

Zwolsestraat 156 2587 WB
The Hague The Netherlands

Product Information
Model Number:
Product Name:
Trade Name:

TRENDnet hereby declare that the product is in compliance with the essential requirements and
other relevant provisions under our sole responsibility.

Safety

EMC

Radio Spectrum & Health

Energy Efficiency

This product is herewith confirmed to comply with the Directives.

Directives:

Person responsible for this declaration.

Place of Issue: Torrance, California, USA

Date: March 24, 2017

Name: Sonny Su

Title: Director of Technology

Signature:

TEW-723BRM

N300 WiFi ADSL 2+ Router

TRENDnet

EN 60950-1: 2006 + A11: 2009: + A1: 2010 + A12: 2011 + A2: 2013

EN 301 489-1 V1.9.2: 09-2011
EN 301 489-17 V2.2.1: 09-2012
EN 55022: 2010 + AC: 2011
EN 55024: 2010 + A1: 2015
EN 55032: 2012/AC: 2013
EN 50564: 2011

9 02-2015 EN 300 328 V1. .1:

EN 62311: 2008

Regulation (EC) No. 1275/2008, No. 801/2013

Low Voltage Directive 2014/35/EC
EMC Directive 2014/30/EC
R&TTE Directive 1999/5/EC
Ecodesign Directive 2009/125/EC
RoHS Directive 2011/65/EU
REACH Regulation (EC) No. 1907/2006

Wireless

Connect your computer wirelessly using the predefined SSID (Wi-Fi Name) and the wireless key (Wi-Fi Password) which can be found
on the included Preset Wireless Settings label or device label located on the bottom of the router.

Preset

Wireless Settings

Wi-Fi Name/SSID

TRENDnet723_XXXX

Wi-Fi Password

XXXXXXXXXXX

Management Login

http://tew-723brm

username: admin

password: XXXXXXXX

2. Open your web browser on the connected computer and enter
http://tew-723brm or http://192.168.10.1 in the address bar of your web browser.

3. In the setup wizard, select your Language, and click Next.

4. Use the default or change the admin modem router management password and click Next. By default, a unique predefined
password has already been assigned in order for you to access the router management page. If you change the default password,
please write down the new password to reference when accessing the modem router management page.

7. Use the default or change the wireless settings and click Next. By default, a unique SSID (Wi-Fi Name) and wireless key (Wi-Fi
Password) have already been preconfigured on your modem router. If you change the default settings, please write down the new
wireless settings to reference for your other wireless devices to connect to your modem router's wireless network.

8. Click Finish to complete the setup and wait for the configuration settings to apply, then test your Internet connection by accessing
Internet sites in your web browser. The DSL and Internet LED indicators will turn solid on solid green when the DSL Internet
connection is established.

Safety notes

Before using your TRENDnet device for the first time, it is essential to read and understand all safety and operating instructions. Keep instructions in
a safe place for future reference. Some TRENDnet products are rated for outdoor applications and can sustain certain weather conditions.
Please refer to the product's Ingress Protection (IP) rating and the operating humidity and temperature range.

DANGER due to electricity

Warning: Never open TRENDnet devices. Doing so poses the risk of electric shock!
The device is voltage free only when unplugging from the mains power supply.
No physical maintenance of TRENDnet devices is required.
If damage occurs, disconnect the TRENDnet device from the power outlet and contact a qualified technician ONLY.

Damage is defined as:

Ÿ If the power cable/plug is damaged
Ÿ If the device has been submerged in liquid (e.g. rain or water; except products that are rated for outdoor applications)
Ÿ If the device is inoperable
Ÿ If there is damage to the housing of the device

Only operate TRENDnet devices using a mains power supply.
To disconnect devices from the mains supply, remove the device itself or its mains plug from the power outlet. The power outlet and all connected
network devices should be easily accessible so that you can pull the mains plug quickly if needed.
TRENDnet devices are designed for indoor use only and in a dry location (except those that are rated for outdoor applications).
To clean a TRENDnet device, disconnect it from the mains supply first and only use a dry towel.

DANGER due to overheating

Never expose TRENDnet devices to extreme heat (e.g. direct sunlight, fire, or other heat sources). For outdoor rated products, please install the
product in an environment that is within the product's operating temperature and humidity range.
Do not interlock multiple TRENDnet devices.
Only install TRENDnet devices in locations with adequate ventilation (slots and openings on the housing are used for ventilation).

Ÿ Do not cover TRENDnet devices when operating.
Ÿ Do not place any objects on TRENDnet devices.
Ÿ Do not insert any foreign objects into the openings of TRENDnet devices.
Ÿ Do not place TRENDnet devices next to an open flame (e.g. fire or candles).
Ÿ Do not expose TRENDnet devices to direct heat (e.g. radiator or direct sunlight).

Limited Warranty

TRENDnet warrants its products against defects in material and workmanship, under normal use and service. Specific warranty periods are listed on each of
the respective product pages on the TRENDnet website.

GPL/LGP General Information

This TRENDnet product includes free software written by third party developers. These codes are subject to the GNU General Public License ("GPL") or GNU
Lesser General Public License ("LGPL"). These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers. TRENDnet
does not provide technical support for these codes.

Please also go to (http://www.gnu.org/licenses/gpl.txt) or (http://www.gnu.org/licenses/lgpl.txt) for specific terms of each license.
The source codes are available for download from TRENDnet's web site (http://trendnet.com/downloads/list_gpl.asp) for at least three years from the

product shipping date.
You could also request the source codes by contacting TRENDnet.

20675 Manhattan Place, Torrance, CA 90501, USA. Tel: [phone] Fax: [phone]

Certifications

This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including
interference that may cause undesired operation.

Waste electrical an electronic products must not be
disposed of with household waste. Please recycle where
facilities exist. Check with your Local Authority or Retailer
for recycling advice.

Technical Support

If you have any questions regarding the product installation,
please contact our Technical Support.
Toll free US/Canada: 1-866-845-3673
Regional phone numbers available at www.trendnet.com/support

Applies to PoE Products Only: This product is to be connected only to
PoE networks without routing to the outside plant.

Note

The Manufacturer is not responsible for any radio or TV interference
caus ed by una uthorize d modifi cati ons to t his equi pmen t. Suc h
modifications could void the user’s authority to operate the equipment.

Advertencia

En todos nuestros equipos se mencionan claramente las caracteristicas
del adaptador de alimentacón necesario para su funcionamiento. El uso
de un adaptador distinto al mencionado puede producir daños fisicos y/o
daños al equipo conectado. El adaptador de alimentación debe operar
con voltaje y frecuencia de la energia electrica domiciliaria exitente en el
pais o zona de instalación.

Product Warranty Registration

Please take a moment to register your product online.
Go to TRENDnet’s website at:

www.trendnet.com/register

5. Set the modem router time settings by select your time zone, daylight saving time offset, and click Next.

TRENDnet

20675 Manhattan Place
Torrance, CA 90501
USA

Copyright © 2017. All Rights Reserved. TRENDnet.

TEW-723BRM(V1)