TRENDnet TEW-647GA - Wireless N Gaming Adapter Quick Installation Manual
Quick Installation Guide
TEW-647GA
H/W: V1
Table of Contents
Table of Contents
English ......................................................................................................
1. Before You Start
.................................................................................
2. Hardware Installation ..........................................................................
Troubleshooting .........................................................................................
1
1
2
10
Version 01.22.2009
1. Before You Start
Installation Requirements
A computer with a network adapter installed.
?
?Wireless router (e.g. TEW-639GR).
Package Contents
TEW-647GA
?
User's Guide CD-ROM
?
?Multi-Language Quick Installation
Guide
?
AC Power Adapter (12V DC, 0.5A)
1x RJ-45 cable
?
?An available DHCP Server –wireless routers usually have a built-in DHCP
server.
?A game console with an Ethernet port.
Application
Wireless N Gaming Adapter
(TEW-647GA)
300Mbps Wireless N
Gigabit Router
(TEW-639GR)
USB to 10/100Mbps Adapter
(TU2-ET100)
OR
Internet
Cable/DSL
Modem
1
English
OR
Y
Y
X
X
B
B
A
A
2. Hardware Installation
Note: There are two methods for setting the gaming adapter: Wi-Fi Protected
Setup (WPS) Push Button Setup or Manual Setup. If your wireless router
does not support WPS, go to section 2.2 Manual Setup. If your wireless
router does support WPS, please follow the directions in section 2.1 Wi-Fi
Protected Setup (WPS) Push Button Setup.
2.1. Wi-Fi Protected Setup (WPS) Push Button Setup
1. Plug the power adapter into the
TEW-647GA and then into an
available power outlet.
2. Press the WPS button on your
wireless router. The example
shows a TEW-639GR.
3. Press the WPS button on the
TEW-647GA. The WPS button will
start to blink.
4. Once the WPS button becomes
steady, the TEW-647GA has been
successfully configured.
2
English
5. Connect an Ethernet cable from
the LAN port on the TEW-647GA to
an Ethernet port on your game
console.
6. Congratulations, the installation is
now complete.
2.2. Manual Setup (For Windows Users)
Note: Manual Setup requires a Windows PC.
1. Insert Utility CD-ROM into your
computer's CD-ROM drive.
2. Click Run Setup.exe (Windows
Vista only)
3
English
Loading...