TRENDnet TEW-432BRP User Manual
Regulatory notes and statements
Wireless LAN, Health and Authorization for use
Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions however are far much less than the electromagnetic energy emissions from wireless devices like for example mobile phones. Wireless LAN devices are safe for use frequency safety standards and recommendations. The use of Wireless LAN devices may be restricted in some situations or environments for example:
·Onboard airplanes, or
·In an explosive environment, or
·In case the interference risk to other devices or services is perceived or identified as harmful
In case the policy regarding the use of Wireless LAN devices in specific organizations or environments (e.g. airports, hospitals, chemical/oil/gas industrial plants, private buildings etc.) is not clear, please ask for authorization to use these devices prior to operating the equipment.
Regulatory Information/disclaimers
Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. The Manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, of the substitution or attachment. Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines.
USA-FCC (Federal Communications Commission) statement
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:
1.This device may not cause interference, and
2.This device must accept any interference, including interference that may cause undesired operation of this device.
FCC Radio Frequency Exposure statement
This Wireless LAN radio device has been evaluated under FCC Bulletin OET 65 and found compliant to the requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF Exposure from radio frequency devices. The radiated output power of this Wireless LAN device is far below the FCC radio frequency exposure limits. Nevertheless, this device shall be used in such a manner that the potential for human contact during normal operation is minimized.
When nearby persons has to be kept to ensure RF exposure compliance, in order to comply with RF exposure limits established in the ANSI C95.1 standards, the distance between the antennas and the user should not be less than 20 cm.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
1.Reorient or relocate the receiving antenna.
2.Increase the distance between the equipment and the receiver.
3.Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
4.Consult the dealer or an experienced radio/TV technician for help.
Export restrictions
This product or software contains encryption code that may not be exported or transferred from the US of Canada without an approved US Department of Commerce export license.
Safety Information
Your device contains a low power transmitter. When device is transmitted it sends out radio frequency (RF) signal.
CAUTION: To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Use on the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
Protection requirements for health and safety – Article 3.1a
Testing for electric safety according to EN 60950 has been conducted. These are considered relevant and sufficient.
Protection requirements for electromagnetic compatibility – Article 3.1b
Testing for electromagnetic compatibility according to EN 301 489-1, EN 301 48917 and EN 55024 has been conducted. These are considered relevant and sufficient.
Effective use of the radio spectrum – Article 3.2
Testing for radio test suites according to EN 300 328-2 has been conducted. These are considered relevant and sufficient.
CE in which Countries where the product may be used freely:
Germany, UK, Italy, Spain, Belgium, Netherlands, Portugal, Greece, Ireland, Denmark, Luxembourg, Austria, Finland, Sweden, Norway and Iceland.
France: except the channel 10 through 13, law prohibits the use of other channels.
TABLE OF CONTENT |
|
ABOUT THIS GUIDE .................................................................................... |
1 |
Purpose.................................................................................................................................................................................................. |
1 |
Terms/Usage ......................................................................................................................................................................................... |
1 |
Overview of this User’s Guide.............................................................................................................................................................. |
1 |
INTRODUCTION ........................................................................................... |
2 |
Applications:......................................................................................................................................................................................... |
2 |
Supported Features: .............................................................................................................................................................................. |
3 |
UNPACKING AND SETUP.............................................................................. |
4 |
Unpacking............................................................................................................................................................................................. |
4 |
Setup ..................................................................................................................................................................................................... |
4 |
HARDWARE INSTALLATION......................................................................... |
5 |
Front Panel............................................................................................................................................................................................ |
5 |
Rear Panel ............................................................................................................................................................................................. |
6 |
Hardware connections........................................................................................................................................................................... |
7 |
Connecting the WLAN Router.......................................................................................................................................................... |
7 |
Check the installation........................................................................................................................................................................ |
7 |
PC NETWORK TCP/IP SETTING ................................................................. |
8 |
Windows 95/98/ME .............................................................................................................................................................................. |
8 |
Windows 2000 ...................................................................................................................................................................................... |
9 |
Windows XP ....................................................................................................................................................................................... |
10 |
CONFIGURATION....................................................................................... |
11 |
Login to the WLAN Router through Wireless LAN........................................................................................................................... |
11 |
Login to the WLAN Router ................................................................................................................................................................ |
11 |
Using the Web Browser ...................................................................................................................................................................... |
11 |
Setup Wizard....................................................................................................................................................................................... |
12 |
Advanced configuration...................................................................................................................................................................... |
22 |
Main.................................................................................................................................................................................................... |
22 |
LAN & DHCP Server ..................................................................................................................................................................... |
22 |
WAN............................................................................................................................................................................................... |
23 |
Password ......................................................................................................................................................................................... |
24 |
Time ................................................................................................................................................................................................ |
25 |
Dynamic DNS................................................................................................................................................................................. |
26 |
Wireless .............................................................................................................................................................................................. |
27 |
Basic................................................................................................................................................................................................ |
27 |
Security ........................................................................................................................................................................................... |
28 |
Advanced ........................................................................................................................................................................................ |
30 |
Wi-Fi Protected Setup..................................................................................................................................................................... |
31 |
Status................................................................................................................................................................................................... |
32 |
Device Information ......................................................................................................................................................................... |
32 |
Log .................................................................................................................................................................................................. |
33 |
Log Setting...................................................................................................................................................................................... |
34 |
Statistic............................................................................................................................................................................................ |
35 |
Wireless........................................................................................................................................................................................... |
36 |
Routing................................................................................................................................................................................................ |
37 |
|
v |
Static ............................................................................................................................................................................................... |
37 |
Dynamic.......................................................................................................................................................................................... |
38 |
Routing Table.................................................................................................................................................................................. |
39 |
Access ................................................................................................................................................................................................. |
40 |
Filters .............................................................................................................................................................................................. |
40 |
Virtual Server.................................................................................................................................................................................. |
46 |
Special AP....................................................................................................................................................................................... |
47 |
DMZ................................................................................................................................................................................................ |
48 |
Firewall Rule................................................................................................................................................................................... |
49 |
Management........................................................................................................................................................................................ |
51 |
Remote Management ...................................................................................................................................................................... |
51 |
Tools ................................................................................................................................................................................................... |
52 |
Restart ............................................................................................................................................................................................. |
52 |
Settings............................................................................................................................................................................................ |
53 |
Firmware ......................................................................................................................................................................................... |
54 |
Ping Test ......................................................................................................................................................................................... |
54 |
TECHNICAL SPECIFICATIONS................................................................... |
55 |
ABOUT THIS GUIDE
Congratulations on your purchase of this IEEE 802.11g Wireless Broadband Router. This integrated access device combines Internet gateway functions with wireless LAN and Fast Ethernet switch. It provides a complete solution for Internet surfing and office resource sharing, and it is easy to configure and operate for every user.
Purpose
This manual discusses how to install the IEEE 802.11g Wireless Broadband Router.
Terms/Usage
In this guide, the term “the WLAN Router” refers to your IEEE 802.11g Wireless Broadband Router.
Overview of this User’s Guide
Introduction. Describes the IEEE 802.11g Wireless Broadband Router and its features.
Unpacking and Setup. Helps you get started with the basic installation of the IEEE 802.11g Wireless Broadband Router.
Identifying External Components. Describes the front panel, rear panel and LED indicators of the IEEE 802.11g Wireless Broadband Router.
Connecting the WLAN Router. Tells how you can connect the IEEE 802.11g Wireless Broadband Router to your xDSL/Cable Modem.
Technical Specifications. Lists the technical (general, physical and environmental, performance and Routers settings) specifications of the IEEE 802.11g Wireless Broadband Router.
Note: Please run the CD-ROM and follow the steps in the Quick Installation Guide first to setup your router. If you still have problems after doing so then proceed to the following paragraphs to install the router with web-based configuration.
INTRODUCTION
With the explosive growth of the Internet, accessing information and services at any time, day or night has become a standard requirement for most people. The era of the standalone PC is waning. Networking technology is moving out of the exclusive domain of corporations and into homes with at least two computers.
This integrated access device combines Internet gateway functions with wireless LAN and Fast Ethernet switch. Designed for the business and home, it saves you the cost of installing a separate modem and ISP line for each computer, while providing ready connection for the users, with or without the network wires.
Broadband network access is also gaining ground. However, allowing more than two computers to access the Internet at the same time means less affordable, higher costs. Thus, there is a need to share one public IP address over a single Internet connection to link the home with the Internet.
The scarcity of IP addresses and using a shared Internet connection through an Internet sharing device can solve high network access costs. All linked computers can make full use of broadband capabilities over such a device.
This device not only comes equipped with a wide range of features, but also can be installed and configured right out of the box. This device supports a simple local area network and Internet access share, offering great cost savings.
The local area network connects home computers while also allowing any of the computers to access the Internet, share resources, or play online games—the basis of the family computing lifestyle.
Applications:
Broadband Internet access:
Several computers can share one high-speed broadband connection through wireless or wired (WLAN, LAN and WAN-Internet).
Resource sharing:
Share resources such as printers, scanners and other peripherals.
File sharing:
Exchange data, messages, and distribute files thus making good use of hard disk space.
Online gaming:
Through the local area network, online gaming and e-commerce services can be easily setup.
Firewall:
A built-in firewall function — for security and anti-hacking systems.
1
Supported Features:
¾High speed data transfer rate
¾NAT for sharing 1 IP address to all LAN/WLAN users.
¾PPPoE and PPTP protocol for Dial-Up ADSL.
¾64/128 bit WEP Encryption
¾WPA-PSK, WPA2-PSK, WPA, WPA2 security
¾DHCP Server / Client.
¾UPnP (Universal Plug and Play).
¾WMM (Wi-Fi Multimedia Quality of Service)
¾WPS (Wi-Fi Protected Setup)
¾Virtual Server mapping.
¾Packet filtering.
¾Protocol filtering
¾Domain filtering
¾DNS
¾Simple Firewall protection.
¾Upgradeable firmware for future function.
¾Simple installation using Setup Wizard.
¾Easy configuration via Web Browser.
UNPACKING AND SETUP
This chapter provides unpacking and setup information for the IEEE 802.11g Wireless Broadband Router.
Unpacking
Open the box of the WLAN Router and carefully unpack it. The box should contain the following items:
One IEEE 802.11g Wireless Broadband Router
One Easy Go Installation CD
One Multi-Language Quick Installation Guide
One 2dBi gain dipole antenna
One external power adapter
If any item is found missing or damaged, please contact your local reseller for replacement.
Setup
The setup of the WLAN Router can be performed properly using the following methods:
The power outlet should be within 1.82 meters (6 feet) of the Broadband Router.
Visually inspect the DC power jack and make sure that it is fully secured to the power adapter.
Make sure that there is proper heat dissipation and adequate ventilation around the Broadband Router. Do not place heavy objects on the Broadband Router.
Fix the direction of the antennas. Try to place the Wireless Router in a position that can best cover your wireless network. Normally, the higher you place the antenna, the better the performance will be. The antenna’s position enhances the receiving sensitivity.
4
HARDWARE INSTALLATION
Front Panel
The figure below shows the front panel of the IEEE 802.11g Wireless Broadband Router.
Rear Panel
The figure below shows the rear panel of the IEEE 802.11g Wireless Broadband Router.
Front Panel
SYSTEM
This indicator blinking green means the WLAN Router is working successfully. Otherwise, this indicator always on or off means the function of the WLAN Router has failed.
WAN (Link/ACT)
The indicators light green when the WAN port is connected to a xDSL/Cable modem successfully.
The indicators blink green while the WAN port was transmitting or receiving data from the xDSL/Cable modem.
WLAN (ACT)
This indicator lights green when there are wireless devices connected and transmitting data to the WLAN Router.
LAN (Link/ACT)
These indicators light green when the LAN ports were connected successfully. These indicators blinking green while the LAN ports were accessing data.
WPS
Push this button to execute the Wi-Fi protected Setup process.
Rear Panel
Antenna
There is one 2dBi gain antenna on the rear panel for wireless connection.
LAN (1-4)
Four RJ-45 10/100Mbps Auto-MDIX ports for connecting to either 10Mbps or 100Mbps Ethernet connections.
WAN
In the four port broadband Router, there is an RJ-45 10/100Mbps Auto-MDIX port for the WAN that connects to the xDSL/Cable modem for Internet connectivity.
POWER
Plug the power adapter to this power jack
RESET
Use a pin-shaped item to push to reset this device to factory default settings. It will be a useful tool when the manager forgot the password to login, and needs to restore the device back to default settings.
5
Hardware connections
Connecting the WLAN Router
1.Plug in one end of the network cable to the WAN port of the WLAN Router.
2.Plug in the other end of the network cable to the Ethernet port of the xDSL or Cable modem.
3.Use another network cable to connect to the Ethernet card on the computer system; the other end of the cable connects to the LAN port of the WLAN Router. Since the IEEE 802.11g Wireless Broadband Router has four ports, you can connect up to four computers directly to the unit. Then you do not have to buy a switch to connect these computers since one WLAN Router functions both as a connection-sharing unit and as a switch.
Check the installation
The control LEDs of the WLAN Router are clearly visible and the status of the network link can be seen instantly:
1.With the power source on, once the device is connected to the broadband modem, the Power, System, LAN, WLAN and WAN port LEDs of the WLAN Router will light up indicating a normal status.
2.When the WAN Port is connected to the ADSL/Cable modem, the WAN LED will light up.
3.When the LAN Port is connected to the computer system, the LAN LED will light up.
PC NETWORK TCP/IP SETTING
The network TCP/IP settings differ based on the computer’s operating system (Win95/98/ME/NT/2000/XP) and are as follows.
Windows 95/98/ME
1.Click on the “Network neighborhood” icon found on the desktop.
2.Click the right mouse button and a context menu will be show.
3.Select “Properties” to enter the TCP/IP setting screen.
4.Select “Obtain an IP address automatically” on the “IP address” field.
5. Select “Disable DNS” in the “DNS” field.
8
6. Select “None” for the “Gateway address” field.
Windows 2000
Double click on the “My Computer” icon on the desktop. When “My Computer” window opens, open the “Control Panel” and then open the “Network dialup connection” applet. Double click on the “Local area network connection” icon. Select “Properties” to enter the TCP/IP setting window.
1.In the “Local area network status” window, click on “Properties.”
2.In the “Local area network connection” window, first select TCP/IP setting and then select “Properties.”
3.Set both “IP address” and “DNS” to Automatic configuration.
Windows XP
Point the cursor and click the right button on the “My Network Place” icon. Select “properties” to enter the TCP/IP setting window.
1.Set “IP address” to “Obtain an IP address automatically.”
2.Set “DNS” to “Obtain DNS server address automatically.”
CONFIGURATION
First make sure that the network connections are functioning normally.
This WLAN Router can be configured using Internet Explorer 5.0 or newer web browser versions.
Login to the WLAN Router through Wireless LAN
Before configuring the WLAN Router through WLAN, make sure that the SSID, Channel and the WEP is set properly.
The default setting of the WLAN Router that you will use:
9SSID: TRENDnet
9Channel: Auto
9Security: disable
Login to the WLAN Router
Before you configure this device, note that when the WLAN Router, make sure the host PC must be set on the IP subnet that can be accessed by the xDSL/Cable modem. For example, when the default network address of the xDSL/Cable modem Ethernet interface is 192.168.10.x, then the host PC should be set at 192.168.10.xxx (where xxx is a number between 2 and 254), and the default subnet mask is 255.255.255.0.
Using the Web Browser
1.Open Internet Explorer 5.0 or above Internet browser.
2.Enter IP address http://192.168.10.1 (the factory-default IP address setting) to the URL web address location.
3.When the following dialog box appears, enter the user name and password to login to the main configuration window, the default username and password is “admin”.
Setup Wizard
Setup wizard is provided as part of the web configuration utility. User can simply follow the step-by-step process to get the wireless Router configuration ready to run in 5 easy steps by clicking on` the “Wizard” button on the function menu. The following screen will appear. Please click “Next” to continue.
Step 1: Choose time zone
Select the time zone from the drop down list. Please click “Next” to continue.
11
Step 2: Set LAN connection and DHCP server
Set user’s IP address and mask. The default IP is 192.168.10.1. If the user chooses to enable DHCP, please click “Enable”. DHCP enabled is able to automatically assign IP addresses. Please assign the range of IP addresses in the fields of “Range start” and “Range end”. Please click “Next” to continue.
Step 3: Set Internet connection
The WLAN Router will attempt to auto detect your Internet Connection.
If the WLAN Router is unable to auto detect your Internet connection, you will need to manually select the Internet connection type: PPPoE to obtain IP automatically; PPPoE with a fixed IP address; PPTP.
Obtain IP automatically (DHCP client):
If the user has enabled DHCP server, choose "Obtain IP automatically (DHCP client)" to have the WLAN Router assign IP addresses automatically.
Loading...