User’s Guide
Modules for Managed/Unmanaged Modular Switch
8-Port 10/100Base-TX Intelligent Switch Module
1000Base-T Intelligent Gigabit Switch Module
100Baes-FX Intelligent Fiber Module
(2/4/8-Port, SC/ST/MT-RJ/VF-45 Connector)
1000Base-SX/LX Intelligent Gigabit Fiber Module
Rev. 02 092000
****** Note: these intelligent modules work with
Managed/Unmanaged Modular Switch
8-Port 10/100 N-Way Intelligent Switch Module
Figure 1. 8-port 10/100 N-Way Module Front View
Features:
? 8X10/100Mbps N-Way auto-negotiation switch ports
? Up to 2.4Gbps Backplane forwarding rate
? 256KB memory buffer
? 4K-entry MAC Address Table
? Store-and-forward technology for abnormal packet filtering
? Half-duplex and full-duplex modes supported
? LED-indicators for 100M, LK/ACT, FD/COL status
LED Indicators
There are three types of LED indicators for each of the RJ-45 Ports. If
there is no connection to a port, the corresponding LED indicators are not
lit.
??100M The LED indicator is green when the corresponding port is
connected to a 100Mbps devices. This LED indicator is not lit when
the corresponding port is connected to a 10Mbps.
??LK/ACT The LED indicator is green when there is a connection
secured to a device ( Link ) to the corresponding port . This LED
indicator blinks when there is a data transmission ( Activity ) taking
place at the corresponding port.
2
??FD/COL The LED indicator is yellow when the corresponding port is
operating in Full-duplex mode. When the corresponding port is
operating in Half-duplex mode, the LED indicator is not lit. When
collisions are occurring at the corresponding port, the LED indicator
blinks.
Gigabit 1000Base-T Intelligent Switch Module
Figure 2. Gigabit 1000Base-T Switch Module Front View
Features:
? Compliant Gigabit Media Independent Interface (GMII)
?? 1 X 100/1000Mbps N-Way auto-negotiation switch port
(Note: the Gigabit port also works with 10Mbps connection, but we do not
recommended user to connect the Gigabit port to 10Mbps connection.)
?? Automatic MDI crossover function
? Up to 2.4Gbps Backplane forwarding rate
? 128KB memory buffer sharing
? 4K-entry Mac Address Table
? Store-and-forward technology for abnormal packet filtering
?? Half-duplex and full-duplex modes supported
?? LED-indicators for 1000M Link, 100M Link, Activity, and Full-duplex
statuses
LED Indicators
There are 4 LED indicators for one RJ-45 connection port. If there is no
connection to a port, the corresponding LED indicators are not lit.
??LK1000 The LED indicator is green when the Port is linking with
1000Mbps mode. When the port is operating in 10Mbps mode or not
connected, the LED indicator is not lit.
3
??ACT This LED indicator blinks green when the port is transmitting
or receiving packets. When the device is not attached, the LED
indicator is not lit.
??LK100 The LED indicator is green when the Port is linking with
100Mbps mode. When the port is operating in 10Mbps mode or not
connected, the LED indicator is not lit.
??FD The LED indicator is yellow when the port is operating in
Full-duplex mode. When the port is operating in Half-duplex mode, the
LED indicator is not lit.
100Base-FX Fiber Intelligent Module Series
1. 2/4-Port 100Base-FX (SC) Intelligent Fiber Module
Figure 3. 4 port 100Base-FX ( SC ) Module Front View
Features:
? 2/4 X 100Mbps fiber ports (SC connectors)
? Up to 2.4Gbps Backplane forwarding rate
? 5MB memory buffer
? 12K-entry MAC Address Table
? Store-and-forward technology for abnormal packet filtering
? Half-duplex and full-duplex modes supported
? LED-indicators for LK/ACT, FD/COL statuses
? For establishing fiber links cable distance up to 2 Km (multi-mode) or
4
60 Km (single-mode)
2. 2/4-Port 100Base-FX (ST) Intelligent Fiber Module
Figure 4. 4-port 100Base-FX ( ST ) Module Front View
Features:
? 2/4 X 100Mbps fiber ports ( ST connectors )
? Up to 2.4Gbps Backplane forwarding rate
? 5MB memory buffer
? 12K-entry MAC Address Table
? Store-and-forward technology for abnormal packet filtering
? Half-duplex and full-duplex modes supported
? LED-indicators for LK/ACT, FD/COL statuses
? For establishing fiber links cable distance up to 2 Km (multi -mode)
3. 2/4/8 -Port 100Base-FX( MT -RJ ) Intelligent Fiber Module
Figure 5. 4-port 100Base-FX (MT-RJ) Module Front View
Features:
? 2/4/8 X 100Mbps fiber ports ( MT-RJ connectors )
? Up to 2.4Gbps Backplane forwarding rate
? 5MB memory buffer
? 12K-entry MAC Address Table
? Store-and-forward technology for abnormal packet filtering
? Half-duplex and full-duplex modes supported
? LED-indicators for LK/ACT, FD/COL statuses
? For establishing fiber links cable distance up to 2 Km (multi -mode)
5
4. 2/4/8 Port 100Base-FX( VF-45 ) Intelligent Fiber Module
Figure 6. 4-port 100Base-FX (VF-45) Module Front View
Features:
? 2/4/8 X 100Mbps fiber ports ( VF-45 connectors )
? Up to 2.4Gbps Backplane forwarding rate
? 5MB memory buffer
? 12K-entry MAC Address Table
? Store-and-forward technology for abnormal packet filtering
? Half-duplex and full-duplex modes supported
? LED-indicators for LK/ACT, FD/COL statuses
? For establishing fiber links cable distance up to 2 Km (multi -mode)
LED Indicators ( for 100Base-FX Fiber Module Series )
There are two LED indicators for each of the Fiber connection ports. If
there is no connection to a port, the corresponding LED indicators are not
lit.
??LK/ACT The LED indicator is green when there is a connection
secured to a device ( Link ) to the corresponding port . This LED
indicator blinks when there is a data transmission ( Activity ) taking
place at the corresponding port.
??FD/COL The LED indicator is yellow when the corresponding port is
operating in Full-duplex mode. When the corresponding port is
operating in Half-duplex mode, the LED indicator is not lit. When
collisions are occurring at the corresponding port, the LED indicator
blinks.
6
Gigabit 1000Base-SX/LX Intelligent Fiber Modules
Figure 7. Gigabit 1000Base-SX/LX Module Front View
Features
? 1 X 1000Mbps fiber port ( SX/LX connectors )
? Up to 2.4Gbps Backplane forwarding rate
? 128KB memory buffer
? Dynamic address learning with 4K-entry
? Store-and-forward technology for abnormal packet filtering
?? Half-duplex and full-duplex modes supported
? LED-indicators for LK, ACT, FD, COL statuses
?? For establishing fiber links cable distance up to 500 m ( 1000Base-SX
SC multi-mode), 10 or 15 Km ( 1000Base-LX SC sin gle mode).
LED Indicators
There are four LED indicators for one Gigabit Fiber connection port. If
there is no connection to a port, the corresponding LED indicators are not
lit.
??LK The LED indicator is green when there is a connection securely
to a device ( Link ) to the corresponding port.
??ACT This LED indicator blinks green when there is a data
transmission ( Activity ) taking place at the corresponding port.
??FD The LED indicator is yellow when the corresponding port is
operating in Full-duplex mode. When the corresponding port is
7
operating in Half-duplex mode, the LED indicator is not lit.
??COL The LED indicator blinks yellow when collisions are occurring
at the corresponding port
Technical Specifications
Standards
Compliance
IEEE 802.3 10BASE-T Ethernet,
IEEE 802.3u 100BASE-TX/FX Fast Ethernet,
IEEE 802.3z 1000BASE-X Fiber Gigabit Ethernet
IEEE 802.3ab 1000BASE-T UTP Gigabit Ethernet
ANSI/IEEE standard 802.3 N-Way Auto-negotiation
Protocol CSMA/CD
Max Forwarding and
Max Filtering Rate
(for 64-byte packets)
14,880 pps to Ethernet port,
148,800 pps to Fast Ethernet port
1,488,000pps to Gigabit Ethernet port
LED-Indicators Per Port: 8 port N-Way: 100M, LK/ACT, FD/COL (3 LEDs)
100M Fiber: LK/ACT, FD/COL (2 LEDs)
Gigabit Fiber: LK, ACT, FD, COL (4 LEDs)
Gigabit UTP: 1000 LK, 100 LK, ACT, FD (4 LEDs)
Network Cables
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable EIA/TIA-568 (100m )
100Base-TX: 2-pair UTP /STP Cat. 5 cable EIA/TIA-568 (100m )
1000Base-T: 4-pair UTP/STP Cat. 5 or above EIA/TIA -568 (100m )
100Base-FX: 50, 62.5/125 micron multi-mode fiber-optics ( 2Km )
8,9/125 micron single-mode fiber-optics ( up to 60Km )
1000Base-X: 50, 62.5/125 micron multi-mode fiber-optics (SX)( 500m )
10/125 micron single-mode fiber-optics (LX)(10 or 15 Km )
Dimensions 178 mm x 152 mm x 25 mm ( L x W x H )
Weight 213 ~ 283 g
Operating
0ºC to 45ºC (32ºF to 113ºF)
Temperature
Operating Humidity 10% to 90% (Non -condensing)
Power Supply Modular Unit:
Input rate: 100~240VAC, 50~60Hz
Internal universal power supply:
4-Slot Modular Switch - DC 3.3V/13A, 5V/4A
8-Slot Modular Switch - DC 3.3V/25A, 5V/4A
EMI FCC Class A, CE Mark
Safety UL, TUV
PMAU001490
8
Loading...