Trendnet TEG-S2500i Datasheet

TRENDnet

TRENDware, USA

What's Next in Networking

TEG-S2500i

24-Port 10/100Mbps Stackable SNMP Switch with Gigabit Slot

The TEG-S2500i 24 Port 10/100 Stackable SNMP Switch provides small and medium businesses with the foundation for a highly scalable and easily managed network. The Web/SNMP Managed Switch allows network administrators to remotely monitor and manage network performance and security. Network administrators can stack up to 8 Switches and manage them with only one IP address using a standard web browser. Server bottlenecks are a thing of the past with the Gigabit module slot that supports a series of optional Gigabit Copper, Gigabit Fiber and GBIC modules. Security and performance are optimized with advanced Port/Tagbased VLAN, QoS, Trunking and monitoring features.

Stackable up to 8 Switches* (requires Gigabit Module); provides up to 192 10/100Mbpbs connections (* You can stack 16 Switches together. But, for better network performance, we suggest stacking no more than 8 Switches.)

Manage all uplinked or Stacked Switches with one IP address from local LAN or Internet (requires valid public IP. If the Switch is behind a Firewall/Router, please open Port 80 and the Agent Control Port 28019 for the Switch’s IP)

24 10/100Mbps Auto-Negotiation and Auto-MDIX Fast Ethernet Ports

1 Gigabit Module Slot for optional module with Copper and/or Fiber Gigabit connections

Full/Half-duplex transfer mode for each 10/100Mbps port (1000Mbps port supports only full-duplex mode)

Store-and-forward switching architecture with non-blocking wire-speed performance

IEEE 802.3x flow control for full-duplex and collision-based back pressure function for half-duplex operation

Broadcast Storm Filtering and Head-of-Line blocking Prevention

Port-Based VLAN (256 Groups), IEEE 802.1q Tag-Based VLAN (PVID 1~255) and IEEE 802.1D Spanning Tree (STP)

IEEE 802.1v protocol-based VLAN classifications and IEEE 802.1x Authentication and Authorization

Port-Trunking with flexible load distribution control and fail-over functions (7 trunk groups, max 4 ports per group)

IP Multicast, IGMP Snooping, and RMON Group 1,2,3,9

2-level priority queuing, Ingress port security mode and by-port Egress/Ingress rate control

Configuration via Console Port (serial cable included), SNMP (v1.0, MIB II), TELNET, and Web Browser

Upgradeable firmware via TFTP and Ping function from the Switch for network diagnostic

8.8Gbps switching fabric

Supports QoS and 802.1p Priority

Standard 19” Rack-Mount Size (rack-mount kit included)

5-Year Warranty

BENEFITSFEATURES

Performance:

Gigabit bandwidth between Stacking Switches and backbone

Expandability:

Expand the network by connecting multiple Stacks of Switches together via Gigabit backbone

Flexibility:

Stack Switches in the same room or in different rooms. Single IP Management allows Administrator to manage/monitor all the Switches locally or remotely (requires public IP) using one IP address

Security:

Administrator can setup 802.1Q or Port-based VLAN to further segmenting the network.

Cost-Effectiveness:

Provides SNMP management and Gigabit Performance at an affordable price.

TEG-S41SX (10-28-2004)

TEG-S2500i

24-Port 10/100Mbps Stackable SNMP Switch with Gigabit Slot

SPECIFICATIONS

Standards:

• IEEE 802.3 10Base-T Ethernet

• IEEE 802.3u 100Base-TX Fast Ethernet

• IEEE 802.3z 1000Base-SX/LX Gigabit Ethernet

• IEEE 802.3x Flow Control

• IEEE 802.1D Spanning Tree

• IEEE 802.1q Tag-based VLAN, Priority Control

• IEEE 802.1v Protocol-Based VLAN

• IEEE 802.1x RADIU Authentication and Authorization

Interfaces:

• 24 x 100Base-TX RJ-45 STP Ethernet Ports

• 2 x 1000Base-TX RJ-45 Connector Ports or optional 1000Base-SX and/or

• 1 x RS-232 Serial Port

Console Port:

• RS-232, female 9-Pin Serial Port (serial cable included)

Buffer Memory:

• 1MB for Control, 3MB for Packet Filter

Filtering Address Table:

• 6K MAC (255 entry of Static MAC), 4K VLAN and 2K Multicast Entries

Packet Forwarding and Filtering Rate:

• 1000M Ethernet: 1,488,100 packets per second per port

• 100M Ethernet: 148,810 packets per second per port

• 10M Ethernet: 14,880 packets per second per port

Cabling:

• Fast Ethernet

- UTP/STP Cat. 5, EIA/TIA-568 100-ohm, 100 meters max.

- 62.5/125um Multimode Fiber with SC-type connector, 2Km max.

• Gigabit Ethernet

- UTP/STP Cat. 5, EIA/TIA-568 100-ohm, 100 meters max.

- 62.5/125µm Multimode Fiber with SC-type connector, 220 meters max.

- 50/125µm Multimode Fiber with SC-type connector, 550 meters max.

Protocol/Topology:

• (CSMA/CD) / Star

LED Display:

• Per Device: Power, Diagnostic, FAN1, FAN2.

• Per Port: Link, Activity,

Power Consumption:

• 30 Watts max. (Input: 100~240VAC, 50/60Hz Internal Power Supply)

Dimensions:

• 440 x 184 x 44mm (17.3 x 7.3 x 1.8 inch) (W x H x D)

Weight:

• 2.3 Kg. (5.1 lb.)

Temperature:

• Operating: 5° ~ 45° C (41° ~ 113° F).

• Storage: -20° ~ 70° C (-4° ~ 158° F)

Humidity:

• 10% ~ 90% (no-condensing)

Certifications:

• FCC, CE/ CB, UL

NETWORKING SOLUTIONS

24-Port 10/100Mbps

Stackable SNMP Switch

(TEG-S2500i)

Workstations with

Fast Ethernet Card

(TEG-PCIWN)

1000Mbps

100Mbps

Server with

Copper Gigabit PCI Adapter

(TEG-PCITXR)

Workstations with

Fast Ethernet Card

(TEG-PCIWN)

To Order Please Call:

1-888-326-6061

Server with

Copper Gigabit PCI Adapter

(TEG-PCITXR)

Trendnet TEG-S2500i Datasheet

Specifications and Main Features

Frequently Asked Questions

User Manual