Trendnet TE100-PS3+ Frequently Asked Questions (FAQ)

TE100-PS3plus F.A.Q.

Q: Why doesn't PS-Admin utility detect my print server?

A:

If you are using Windows XP you will have to disable the built in firewall. But for all operating
systems you have to disable any other form of firewall software such as Norton Internet Security,
Black Ice, and Zone Alarm.

Make sure that you have “Client Services for Netware” installed, it should automatically install
IPX/SPX. IF not please do so. Note: Windows XP Home edition does not have the capability to

install Client Services for Netware.

Q: How do I change the IP address of my print server?

A:

Step 1. Open up the PS-Admin Utility and click on TCP IP Protocol.

Step 2. Change IP Address:

In this dialog box, you can Manually Assign. When completed, click OK.

TE100-PS3plus F.A.Q.

Q: How do I find the Port Name of the Print Server?

A:

Step 1. Click on “Server Device”.

Step 2. Click on the port that you have your printer plugged into.

Step 3. Write down the Port Names for future reference.

TE100-PS3plus F.A.Q.

Q: How do I install my printer on Windows 95/98/ME?

A:

In Windows 98/Me you will need to install the LPR client.

For Windows 98/ME you will also need to know the port name that you are printing to (The Port
Name is the PS-xxxxxx-P1, X being the actual number listed in the Port Name box).

Installing LPR:
Step 1. Once the file is downloaded and extracted, Go to Start > Settings > Control Panel >

double-click on Networks. Click on Add.

Step 2. Highlight Client and click on Add.

Step 3. Click on Have Disk > Browse. Browse to the location of the extracted LPR Client.

TE100-PS3plus F.A.Q.

Step 4. Click OK 3 times.

Step 5. From the list highlight LPR For TCP/IP and click on Properties.

Step 6. Click on Add Port.