TRENDnet N150 Quick Installation Manual
Quick Installation Guide
TEW-646UBH
1.01
Table of Contents
Version 01.08.2011
English 1
1. Before You Start
2. How to Install 2
3. Using the Wireless Adapter 7
1
Troubleshooting 8
Wireless Tips 9
1. Before You Start
Ÿ
1.1 port, the maximum speed is 12Mbps)
ŸCD-ROM Drive
USB port: 2.0 or 1.1 (Disclaimer: When connecting the TEW-646UBH to a USB
Package Contents
Ÿ
ŸCD-ROM (Utility and User’s Guide)
ŸMulti-Language Quick Installation Guide
TEW-646UBH
System Requirements
1
Supported Operating Systems CPU
Memory
Windows 7 (32/64-bit)
Windows Vista (32/64-bit)
Windows XP (32/64-bit)/2000
1GHz or above
800MHz or above
300MHz or above
1GB RAM or above
512MB RAM or above
256MB RAM or above
Mac OS X (10.5)
Mac OS X (10.6)
Mac OS X (10.4)
867MHz or above
333MHz or above
Intel Processor
512MB RAM or above
256MB RAM or above
1GB RAM or above
Software Utility Requirements
2. How to Install
2
1. Insert the Utility & User's Guide CD-ROM into
your computer's CD-ROM Drive.
Important! DO NOT install the TEW-646UBH in the computer until instructed to do so.
Note: For Mac OS X (10.4-10.6) instructions please refer to the User's Guide. The Mac
drivers can be found in the Mac OS X folder on the Utility and User's Guide CD-ROM
drive.
3. Click Install Utility.
2. Click Run Autorun.exe (Windows 7/Vista only).
4. Choose the desired language and then click
Next.
5. Click Next. Then follow the InstallShield
Wizard instructions.
3
8. Remove the Utility & User’s Guide CD from
your CD-ROM drive.
6. Click Install this driver software anyway
(Windows 7/Vista). Click Continue Anyway
(Windows XP). Click Yes (Windows 2000).
7. Select Yes, I want to restart my computer
now and then click Finish.
4
Note:
For Windows 7/Vista, drivers will install automatically. Proceed to section 3 Using the Wireless
Adapter. For Windows XP, continue on to step 11. For Windows 2000, continue on to step 15.
9. Screw in the antenna to the TEW-646UBH.
10. Connect the TEW-646UBH to an available
USB port on your computer.
Loading...