TRENDnet Multi-Function Printer User Manual
Quick Installation Guide
TE100-MP1UN
H/W: V1.0R
Table of Contents
English ......................................... ..............................................................................................................
1. Before You Start ................................................
2. How to Install .....................................................................................................................................
3. Printing ..............................................................................................................................................
4. Faxing ...............................................................................................................................................
5. Scanner .............................................................................................................................................
Troubleshooting ...........................................................................................................................................
................................. ...............................................
1
1
2
7
8
9
10
Version 09.16.08
1. Before You Start
Package Contents
E100-MP1UN
?T
?Utility CD-ROM
?Multi-Language Quick Installation
Guide
ower Adapter (5V, 2A)
?P
System Requirements
CD-ROM Drive
?
?CPU: 300Mhz or above/ 800Mhz or above (Windows Vista)
? Memory: 256MB RAM or above/ 512MB RAM or above (Window Vista)
? Windows 2000/XP/2003 Server/Vista (32bit)
Note:
1. Do not perform the following unless instructed to do so:
1. Install the utility
2. Connect printer to Print Server
3. Connect computer to Print Server
2. The utility must be installed on each computer in order to use your multifunction printer.
Application
1-Port Multi-Function Print Server
(TE100-MP1UN)
4-Port Gigabit Firewall Router
(TWG-BRF114)
Multi-Functional
USB 2.0 Printer
Workstations with Fast Ethernet Adapter
(TE100-PCIWN)
1
English
Internet
Cable/DSL
Modem
2. How to install
1. Install the printer drivers to your
computer. Then power down the
printer and disconnect the printer
from your computer.
Note: Please refer to your printer's manual for printer installation instructions.
2. Insert the Utility CD-ROM into your
CD-ROM drive.
3. Click Run Autorun.exe (Windows
Vista only).
4. Click Install Utility. Then click
Setup Wizard.
5. Connect the USB Printer to the
USB port on the Print Server.
Then click OK.
English
2
6. Connect a RJ-45 network cable
from a Switch/Router to the LAN
port of the Print Server.
7. Connect a RJ-45 network cable
from a Switch/Router to the
Ethernet port on your computer
and then click OK.
8. Power ON your printer and then
click OK.
9. Connect the AC Power Adapter to
the Print Server and then to a
power outlet. Then click OK.
10. Verify the Status LED is on and
the Error LED if off on the Print
Server. Then click Yes.
English
3
Loading...