TRENDnet AC750 TEW-816DRM Quick Installation Manual
T R E f l D n e f
i
• AC750 Wireless VDSL2/ADSL 2+ Modem Router
TEW -816DRM
• Quick Installation Guide (1)
TEW-816DRM (V1) /03.2 5.2015
PYCCKMfl ESPAftOL I DEUTSCH FRANQAIS ENGLISH
1. Before You Start
Package Contents
• TEW-816DRM
• Quick Installation Guide
• CD-ROM (User's guide)
• Power adapter (12V DC, 1A)
• Network cable (1.5 m / 5 ft.)
• RJ-11 telephone cable (1.8 m / 5.4 ft)
Minimum requirements
• A computer with a wired or wireless network adapter and web browser Broadband internet
• VDSL or ADSL internet from an Internet Service Provider
1
2. Installation
1. Connect the RJ-11 telephone cable to the TEW-816DRM modem's VDSL/ADSL port, then into
a phone jack.
2. Connect your computer's network port to one of the modem's LAN ports.
4. To confirm that the device is fully functional, verify that the status LED indicators on the front of
the modem are lit: Power (Green), DSL (Green), Wireless (Green) and the LAN port (1, 2, 3,
4) your computer is connected (Green).
2
es p a Nol
3. VDSL Setup
Note: It is recommended that you configure the modem from a wired computer.
1. Open your web browser, type http://192.168.10.1 into the address bar of your web browser,
and press enter.
2. Log in using default Username and Password located on the front sticker or the label on the
back of the modem.
Login to the TEW -816D RM
Username:
Password:
Language:
Login
Pre se t
W ireless Settings
Wi-Fi Name/SSID
Wi-Fi Key
XXXXXXXXXXXXX
Management Login
192.168.10.1
username: admin
password: XXXXXX
3. Once you are logged in, click Setup, and then click Setup Wizard to start configuring the
modem.
Note: In the example below, we will be configuring a VDSL connection type with PPPoE
connection type. If you are unsure of your connection type, contact your Internet Service
Provider.
(N/B/G)
TRENDnetXXX 2.4GHz XXXX
3
4. Select the Internet connection mode you would like to configure, and click Next to continue.
5. Select the Internet connection type to configure, and click Next. PPPoE is selected because
it’s a common type. Confirm your connection type with your ISP.
6. Select your country and the Internet Server Provider (if your ISP is not listed select other).
Then enter your assigned PPPoE Username and Password from your ISP. Click Next to
continue.
4
Loading...