TRENDnet AC750, TEW-821DAP, TEW-810DR Quick Installation Manual

TEW-810DR (V1) / 09.19.2013

AC750 Dual Band Wireless Router

TEW-810DR

 Quick Installation Guide (1)

Installation Requirements

Package Contents

1. Before You Start

1

 TEW-810DR
 Multi-Language Quick Installation Guide
 CD-ROM (User's Guide)
 Network cable (1.5 m / 5 ft.)
 Power adapter (12V DC, 1A)

 A computer with a wired or wireless network adapter and web browser
 Broadband internet
 Installed modem

2

2. Installation

1. Verify that you have an Internet connection.

2. Power off your modem.

3. Disconnect the network cable from your modem and your computer.

4. Connect your modem to the TEW-810DR’s Internet port (yellow).

5. Connect your computer to one of the wireless router’s LAN ports.

6. Power on your router.

7. Power on your modem. Wait until the LEDs indicate that modem is fully functional. For more

information on your modem's LEDs, please refer with your modem's user's guide.

8. Verify that the status LED indicators on the front of the router to confirm that the device is fully
functional: Power (Green) and Internet (Green / Blinking).

Power Internet

Note: It is recommended that you configure the wireless router from a wired computer.