TREND IQVIEW-NDP User Manual

Installation Instructions

IQVIEW/NDP ADAPTOR PLATE

IQView in Place of NDP Adaptor Plate

Important: Retain these instructions

Unpacking

IQVIEW/ADAPTER PLATE
Templ.ate

IQVIEW/NDP ADAPTOR PLATE
Installation Instructions
TG200828

IQVIEW/NDP ADAPTOR PLATE
Template TG200829

Installation

Dimensions

1

250 mm (9.84”)

230 mm (9.06”)

Cutout and Drill Panel

3

a

view from front

2 mm (0.08”)

e.g. line up with top
of NDP cutout

Remove NDP

2

a

IQVIEW/ADAPTER PLATE
Templ.ate

bremove earth lead remove brackets

IQVIEW/NDP ADAPTOR
PLATE template TG200829

N D P C u t o u t

A d a p t o r C u t o u t

or line up with NDP
cutout in the centre

N D P C u t o u t

A d a p t o r C u t o u t

IQVIEW/NPD ADAPTOR PLA TE Installation Instructions TG200828 Issue 1/A 24/1 1/04

6 mm (0.24”)

217 mm (8.54”)

4 holes of Ø 5 mm

200 mm (7.87”)

20 mm (0.79”)

240 mm (9.45”)

205 mm (8.07”)

6 mm (0.24”)

1

IQVIEW/NDP ADAPTOR PLATE Installation Instructions

Installation (continued)

Mount Adaptor Plate

4

a

5

view from front

Fit IQView to Adaptor Plate

a

view from rear

4 x M4 x 10 mm
screws
provided

b

view from rear
tighten 4 off 4 mm nuts

crinkle washer
(supplied)

b

view from front

4 mm nut
(supplied)

3 mm
hexagonal
socket key

6 mm (0.24”)
maximum

WARNING
Do not use any other screws than those

!

provided. Failure to comply could cause
damage to the unit

spare screws available: ACC/SCREWS

Earth Adapter Plate

6

rear view of
connector

1

RxTx

R+ R- T+ T-

OK

7 6 5 4

3 2 1

OK

RS232

28-36 V

ETHERNET

24 V

LINK

DATA

~

24 Vac
28 Vdc

28 - 36 V
24 V ~

E
E

0V

24 Vac

+28V

c

view from front

Install IQView

7

IQView../RPM Installation

Instructions TG200712

WEEE Directive :

At the end of their useful life the packaging and
product should be disposed of via a suitable
recycling centre.
Do not dispose of with normal household waste.
Do not burn.

Trend Control Systems Ltd reserves the right to revise this publication from time to time and make changes to the content
hereof without obligation to notify any person of such revisions or changes.

Website www.trend-controls.com

Fax (UK) [phone]

E-mail [e-mail]

2

P.O. Box 34, Horsham, West Sussex, RH12 2YF United Kingdom
Telephone [phone]

Registered office. Novar House 24 Queens Road Weybridge Surrey KT13 9UX Registered in England No 1664519

Fax (International) [phone]

IQVIEW/NPD ADAPTOR PLATE Installation Instructions TG200828 Issue 1/A 24/1 1/04