Trelock FC 820, FC 830, FC 840, FC 845 User guide

COCKPIT

GB MANUAL

www.trelock.de

2

FC 820 /830 / 840 / 845

You have decided to purchase the
TRELOCK bike computer FC 820 /
FC 830 / FC 840 (each with Uni-Base) or
FC 845 (Night-Light-Base) and, as such,
your choice is an excellent one. Your new
bike computer is easy and convenient
to operate thanks to the visual guidance
system and large mono-button typical of
TRELOCK products. Please read through
this manual prior to your initial usage of
the computer.

38

Contents

1. Scope of supply

2. Insertion of batterie 41

3. Assembly/Installation 42

4. Display design and operating principle 47

5. General default settings 48

6. Main menus 59

7. Training 66

8. Additional information

and instructions

9. Notes 69

40

66

39

1. Scope of supply

1.1 FC 820, 830, 840

1.2 FC 845

2x

2x

3x

2x

40

2. Insertion of batterie 2.1 Sensor

When supplied to the customer, the
battery has already been inserted into the
bike computer. In order to activate the
computer, the red plastic fl ag must fi rst be
removed. Turn the battery compartment
cap on the bottom of the computer in an
anti-clockwise direction and pull the fl ag
out. Then turn the cap fi rmly back in place.

In order to insert this battery, use a coin
to turn the battery compartment cap in
an anti-clockwise direction and insert
the battery with the + sign pointing
upwards (see fi g.). Then turn the cap
fi rmly back in place.

Lithium Battery CR2032

Lithium Battery CR2032

41

2.2 Only FC 845

The display for your bike computer is fed
via a battery in the night-light base. In or­der to insert this battery, use a coin to turn
the battery compartment cap in an anti­clockwise direction and insert the battery
with the + sign pointing upwards (see fi g.).
Then turn the cap fi rmly back in place.

Lithium Battery CR2032

42

3. Assembly/Installation

3.1 Assembly/Installation FC 820, 830, 840
a) Handlebar

b) Frame

3.2 FC 820, 830, 840

43

3.3 FC 845

44

3.4 Assembly/Installation of sensor

45

3.5 Assembly/Installation of magnet

46

4. Display design and operating principle

Visual guidance

system

SET-button

Analogue speedometer

display

Comparison of
current speed with
average speed

Change battery

MODE button

Display line 1

Display line 2

Display line 3

47