Trek 950 User Manual
Model 950
Nozzle Ionizer
! Ultra-Small, Compact
Body
! Corona-Based
Discharge
! Variety of Air Flow
Profiles
Trek’s Model 950 Nozzle Ionizer provides fast and
efficient removal of dust and static charge to help
support manufacturing operations requiring a clean
room environment. The compact ionizer uses highpressure air flow to neutralize the static charge. It has a
built-in high voltage power supply and an abnormal
operation detection/warning function. The 950
operates by connecting a compressed air supply and a
24V power supply to the nozzle unit.
Using a high-frequency corona discharge to generate air
ions, the 950 quickly eliminates work place electrostatic
charge to support a vari ety of applications.
Interchangeable nozzle tips are optionally available and
can be quickly interchanged at the work site. The nozzle
designs, which include wide-nozzle types and tube
types, provide different air flow profiles to accommodate
specific application needs. The unit has an LED display
and contact output to indicate abnormal conditions.
These functions help to quickly identify when the ionizer
is operating improperly during critical production line
processes.
! Optional Nozzle Tips
! Ion Air Transfer Via
Optional Tubes
! Automatic Alarm
Protection for Critical
Production Line
Processes
! Easy Maintenance
! Removable Power
Supply & Emitter
Needle Eases Cleaning
The high voltage supply and ionizing electrode can be
easily replaced through the back of the unit, which
contributes to easy cleaning and replacement at the
production line site with short down time.
Measurement and Power Solutions
www.trekinc.com
and Parts Replacement
! Compliant
TM
Model 950 Nozzle Ionizer Specifications
All specifications are with no load unless otherwise specified.
FEATURES PERFORMANCE (Con’t.) ACCESSORIES SUPPLIED
Ion Generation Gauge Pressure (when connecting Nozzle Instruction Manual
High-frequency Corona discharge Ionizer and optional nozzle) Signal to Power Supply Cable
High Voltage Protection -TT(Teflon tube) 0.05 to 0.50MPa
Alarm and turn-off upon detection -100B ~ 300B 0.05 to 0.60MPa
of abnormal operation -100BL ~ 200BL 0.05 to 0.60MPa
Discharge Needle Contamination -C100 ~ C500 0.05 to 0.30MPa
Detection -ST(Silicon tube) 0.05 to 0.30MPa
An alarm is triggered and an output -60S 0.05 to 0.60MPa
relay is energized if the discharge -F 0.05 to 0.60MPa
needle becomes contaminated
Optional Air Tube for Ion Air Transfer
High-frequency ionization enables
ion air transfer to difficult-to-reach
tight locations via an optional tube
Easy Maintenance
Replaceable HV power supply and
ionization needle at the production
work site.
PERFORMANCE
Output Voltage
3.0 kV AC
Air Purge - Fluid
Clean Air
Model 10/40A Specifications
-S (standard) 0.05 to 0.60MPa
OPTIONAL ACCESSORIES
Nozzles
-120PSP 0.05 to 0.50MPa
GENERAL
Power Supply Voltage
24 VDC ±5% (2.4VA)
Operating Conditions
Temperature
0 to 40°C
Relative Humidity
15 to 65% (with no condensation)
AC Adapters Kits
Dimensions (mm)
86.5 L x 18 W x 50 H (Housing Only)
Weight
Approx. 80g (Housing Only)
LED Display Indicators
P/N 950-C100 100mm Carrier Nozzle
P/N 950-C200 200mm Carrier Nozzle
P/N 950-C300 300mm Carrier Nozzle
P/N 950-C400 400mm Carrier Nozzle
P/N 950-C500 500mm Carrier Nozzle
P/N 950-60S Shower Nozzle
P/N 950-100B 100mm Bar Nozzle
P/N 950-200B 200mm Bar Nozzle
P/N 950-300B 300mm Bar Nozzle
P/N 950-F Flat Nozzle
P/N 950-TT Teflon Carrier Tube
Nozzle
P/N 950-ST Silicon Carrier Tube
Nozzle
P/N 950-24V-1 AC Adapter Kit
(includes power supply, signal cable
and ground wire)
P/N 950-24V-2 AC Adapter Kit
(includes power supply)
Air Purge - operating pressure
0.05 to 0.6MPa
Alarm Output Signal (ALARM)
MOSFET relays
30V @ 0.3 amp contacts
Clean Check Output Signal (CC)
MOSFET relay
30V @ 0.3 amp contacts
Ozone Generation
States
Power On
Normal
HV Pr oblem
Cleaning
Required
H.V. Off
Power O ff
Power H.V. C.C. Alarm Alarm N.C. Alarm N.O.
o
o
o
o
LED State
o
o
o
o
ON
O FF
ON
ON
O FF
Relay State
OFF
ON
OFF
OFF
OFF
0.05ppm or less (at a distance of
300mm from air outlet)
CERTIFICATE AND COMPLIANCE
TREK, INC. certifies that each Model 950 is tested and calibrated to specifications using
Ion Balance
±15 V or less at the work surface
measurement equipment traceable to the National Institute of Standards and Technology
or traceable to consensus standards.
Model 950 Accessories (supplied) Model 950 Optional Accessories
Operator’s Manual
Signal to Power Supply Cable
Copyright © 2012 TREK, INC.
All specifications are subject to change.
1230/DEC
Nozzles - Please select from the part numbers listed above
AC Adapter Kits - Please select from the part numbers listed
above
C.C
OFF
OFF
ON
OFF
OFF
TREK, INC. • 190 Walnut Street • Lockport, NY 14094 • USA • 800-FOR TREK
716-438-7555 • 716-201-1804 (fax) • www.trekinc.com • sales@trekinc.com
Loading...