Trek 930 User Manual

Model 930
Benchtop Ionizer

! Eliminates

Electrostatic
Charges
Efficiently,
Quickly,
Reliably

! Provides Work

Area Voltages

The Trek Model 930 Benchtop AC Air Ionizer is effective in solving

problems in the workshop or on the production floor by
neutralizing static charges that can cause ESD (electrostatic
discharge) damage to sensitive semiconductor and LED devices
due to contamination, dust attraction and device handling
problems. The powerful high performance of the 930 provides
efficient high volume air ionization and together with an exclusive
automatic ion balance feature which generates the appropriate
positive and negative ions reduces electrostatic charge generated
voltages at the work surface to less than ±5 V.

The compact size and the strength of the built-in fan in the Model
930 enable it to perform in a wide variety of settings and adjust to
a wide range of air volume input levels. The fast discharging time
eliminates electrostatic charges from devices and surfaces in one
second or less for distances up to 30cm from the center of the air
source. This is compliant with International Standards (IEC 61340)
which covers the requirements for the design, implementation
and maintenance of an ESD control program.

The 930 utilizes a Titanium electrode, a stainless steel housing,
and is equipped with a built-in cleaning brush. The operator can
perform periodic cleaning to help maintain the unit's high
ionization efficiency by simply turning the center knob on the
cleaning brush to sweep the ionizing elements clear of dust and
other contamination. LED lights on the front panel indicate to the
operator the status of the ion balance, as well as power on status,
fan operation and abnormal voltage or ion levels. The unit is
equipped with a washable reusable polyurethane air filter.

Within ±5V

! High Speed

Electrostatic
Elimination
Conforms to
International
Standards*

* IEC61340

! AC Operation

Supports
Stable and
Consistent Ion
Balance

Measurement and Power Solutions

www.trekinc.com

TM

Model 10/40A Specifications

Model 930 Specifications

Features Performance General

Automatic, High Speed Static Charge
Elimination

Generates an equivalent amount of
plus or minus ions to completely
eliminate electrostatic in less than 1
second at a distance of 30cm or less

from the center of the air source.
Built-In Self Correction
Automatic ion balancing produces a

work surface voltage of less than

within the appropriate range without

intervention by the operator.

Variable Air Input

A single-step air flow adjustment

adjusts to a maximum of 4.4

(without the filter attached).

Front Panel Indicators

5 LEDs indicate levels of plus and

minus ion balance. Additional LEDs

indicate power on, operation in

progress, system failure and fan

failure.

Reusable Air Filter

Washable polyurethane foam, 13PPI.

Dedicated AC/DC Adapter

Input Voltage

±5V

3

m /min

95 to 265 V AC, 47 to 63 Hz

Output Voltage

24 VDC ±5%, 1.5 A MIN

Ion Balance

0V to less than ±5 V (Automatic ion
balance method)

Discharge Time

1 second max. (At a distance of 300
mm, highest air capacity)

Ozone Generation

Less than 0.02 ppm
* DASHIBI 1003AH ozone monitor
(ultravoilet absorption method) is
used for the measurement.

Air Volume

Max. 4.4 m /min (without filter
attached)

Noise Volume

41 dB-A (lowest air capacity) to 59
dB-A (highest air capacity) (with filter
attached)

Wind Speed (measured at the central

position of the air flow)

Distance Highest Lowest

(m/sec) (m/sec)

30cm 1.9 0.6
60cm 1.7 0.5
90cm 1.4 0.4
120cm 1.0 0.4

Power Supply Voltage (from adapter)

24 VDC ±10%, 1A maximum

Operating Conditions

Temperature: 0 to 50°C
Relative Humidity: 10 to 85% (with

no icing or condensation)

Installation Distance

50 mm to 900 mm (Recommended
installation distance: 300 mm,
(work surface to air outlet).

3

Power Switch

Switch on Rear Panel.

Emitter Cleaner

Manual type nylon brush is
provided

Dimensions (mm)

150 W x 236 H x 94 D (housing

only)

Weight

Approx.1.9g (stand part
included)

Dimensions

Model 930 Accessories (supplied)

Operator’s Manual

TREK, INC. • 190 Walnut Street • Lockport, NY 14094 • USA • 800-FOR TREK

(fax) • www.trekinc.com • [e-mail] 716-438-7555 • 716-201-1804