Trek Model 821HH
Hand-Held Electrostatic Voltmeter
Trek’s Model 821HH Infinitron Hand-Held Electrostatic
Voltmeter represents the next generation of contacting
precision surface voltage measuring instruments, providing
input characteristics far beyond the limits of any currently
available hand-held voltmeter product.
The Model 821HH can easily measure the voltage level of both
conductive and insulative objects and surfaces with virtually
zero charge transfer to the measurement probe. This results in
stable high accuracy voltage measurement capability for ESDsensitive devices.
Key Specifications
Measurement Range:
!
Voltage Display Accuracy
!
Input Characteristics: Resistance greater than 1 x 10 W
!
Voltage Monitor Output: Scale factor at 1/1000
!
0 to ±2 kV DC or peak AC
Better than 1% of full scale, ±1 digit
Capacitance less than
1 x 10 F
14
-14
®
Typical Applications Include
! Semiconductors
LEDs
!
MR head sensors
!
!
Other ESD sensitive devices
Features and Benefits
!
Probe tip assumes the voltage level of the measured object’s surface as the tip approaches resulting in no current
flow at the time of contact.
!
Battery or line operation
!
Easy to read LCD display
Records voltage, temperature and humidity
!
Data graphing capabilities
!
!!NIST-traceable Certificate of Calibration provided with each unit
compliant
TREK, INC. • 190 Walnut Street • Lockport, NY 14094 • USA • 800-FOR TREK
716-438-7555 • 716-201-1804 (fax) • www.trekinc.com • sales@trekinc.com
A push-button for entering the menu system to
Review Data, Erase Memory and Set Auto Off
functions
240 mm H x 140 mm W 52.5 mm D
(9.5” H x 6” W x 2” D)
Ground Reference
Receptacle
Voltage Monitor
Connector
15°C to 35°C (59°F to 95°F)
To 2000 meters (6561.68 ft.)
Internal NiMH battery or
External 15 V @ 1 A Supply / Charger
Greater than eight hours of continuous
operation
PN: 24012 Manual with software
15 V @ 1 A universal AC/DC adapter
TREK, INC. certifies that each Model 821HH is
tested and calibrated to specifications using
measurement equipment traceable the National
Institute of Standards and Technology or
traceable to consensus standards
Safety requirements for electrical equipment for
measurement, control and laboratory use - Part
1: General Requirements
Electrical equipment for measurement, control
and laboratory use - Part 1: General
requirements
Model 821HH Specifications
0 to ±2 kV DC or peak AC
Accuracy
At the Voltage
Monitor Output
Better than ±1% of full scale
Better than ±1% of full scale, ±1 digit
Bandwidth (-3 dB)
1000 V p-p sine wave: better than 1 kHz (-3 dB)
14
Resistance greater than 1 x 10 W
-14
Capacitance less than 1 x 10 F
-14
Current less than 1 x 10 A
Stability Drift with
Time (probe in free
air)
Less than 2 V/second
USB Data Rate
0 to ±2000 V with a resolution of 1 V
Maximum and
Maximum Readings
User settable: 5 minutes, 10 minutes, 15
minutes or disabled
Voltage Monitor
Output (2.5 mm jack)
An output provides a low-voltage replica of the
measured voltage
1/1000th of the measured voltage
Speed of Response
(10% to 90%)
Less than 500 µS for an input step change of
1 kV
Pressing the Record / Hold push-button will
hold the measurement, while pressing and
holding the Record / Hold button for a period of
greater than 3 seconds will store the
measurement
*Measured using the true rms feature of the Hewlett Packard Model 34401A digital multimeter
Measurement and Power Solutions
Copyright © 2013 TREK, INC. All specifications are subject to change. 1304/JRB
TM